@@ -403,11 +403,11 @@ msgstr "``x``"
403403
404404#: ../../library/struct.rst:226
405405msgid "pad byte"
406- msgstr ""
406+ msgstr "填充位元組 "
407407
408408#: ../../library/struct.rst:226
409409msgid "no value"
410- msgstr ""
410+ msgstr "無值 "
411411
412412#: ../../library/struct.rst:226
413413msgid "\\ (7)"
@@ -423,7 +423,7 @@ msgstr ":c:expr:`char`"
423423
424424#: ../../library/struct.rst:228
425425msgid "bytes of length 1"
426- msgstr ""
426+ msgstr "長度為 1 的位元組 "
427427
428428#: ../../library/struct.rst:228 ../../library/struct.rst:230
429429#: ../../library/struct.rst:232 ../../library/struct.rst:234
@@ -446,7 +446,7 @@ msgstr ":c:expr:`signed char`"
446446#: ../../library/struct.rst:253 ../../library/struct.rst:255
447447#: ../../library/struct.rst:267
448448msgid "integer"
449- msgstr ""
449+ msgstr "整數 "
450450
451451#: ../../library/struct.rst:230
452452msgid "\\ (1),\\ (2)"
@@ -628,7 +628,7 @@ msgstr ":c:expr:`char[]`"
628628
629629#: ../../library/struct.rst:263 ../../library/struct.rst:265
630630msgid "bytes"
631- msgstr ""
631+ msgstr "位元組 "
632632
633633#: ../../library/struct.rst:263
634634msgid "\\ (9)"
@@ -667,13 +667,17 @@ msgid ""
667667"The ``'?'`` conversion code corresponds to the :c:expr:`_Bool` type defined "
668668"by C standards since C99. In standard mode, it is represented by one byte."
669669msgstr ""
670+ "``'?'`` 轉換代碼對應於自 C99 以來 C 標準定義的\\ :c:expr:`_Bool` 型別。\\ "
671+ "在標準模式下，它由一個位元組表示。"
670672
671673#: ../../library/struct.rst:287
672674msgid ""
673675"When attempting to pack a non-integer using any of the integer conversion "
674676"codes, if the non-integer has a :meth:`~object.__index__` method then that "
675677"method is called to convert the argument to an integer before packing."
676678msgstr ""
679+ "當嘗試使用任何整數轉換代碼打包非整數時，如果非整數具有\\ :meth:`~object.__index__`\\ "
680+ "方法，則會呼叫該方法在打包之前將引數轉換為整數。"
677681
678682#: ../../library/struct.rst:291
679683msgid "Added use of the :meth:`~object.__index__` method for non-integers."
@@ -686,6 +690,8 @@ msgid ""
686690"the standard size, you can use whichever of the other integer formats fits "
687691"your application."
688692msgstr ""
693+ "``'n'`` 和 ``'N'`` 轉換代碼僅適用於原生大小（作為預設選擇或使用 ``'@'``\\ "
694+ "位元組順序字元）。對於標準大小，您可以使用適合您應用程式的其他整數格式。"
689695
690696#: ../../library/struct.rst:301
691697msgid ""
@@ -694,6 +700,9 @@ msgid ""
694700"``'f'``, ``'d'`` or ``'e'`` respectively), regardless of the floating-point "
695701"format used by the platform."
696702msgstr ""
703+ "對於 ``'f'``、``'d'`` 和 ``'e'`` 轉換代碼，打包表示法使用 IEEE 754 binary32、\\ "
704+ "binary64 或 binary16 格式（分別對應於 ``'f'``、``'d'`` 或 ``'e'``），無論平台\\ "
705+ "使用何種浮點數格式。"
697706
698707#: ../../library/struct.rst:307
699708msgid ""
@@ -703,6 +712,9 @@ msgid ""
703712"on the host system. The struct module does not interpret this as native "
704713"ordering, so the ``'P'`` format is not available."
705714msgstr ""
715+ "``'P'`` 格式字元僅適用於原生位元組順序（作為預設選擇或使用 ``'@'`` 位元組順序字元）。\\ "
716+ "位元組順序字元 ``'='`` 根據主機系統選擇使用小端序或大端序。struct 模組不將其解釋為\\ "
717+ "原生順序，因此 ``'P'`` 格式不可用。"
706718
707719#: ../../library/struct.rst:314
708720msgid ""
@@ -715,10 +727,16 @@ msgid ""
715727"operations. See the Wikipedia page on the `half-precision floating-point "
716728"format <half precision format_>`_ for more information."
717729msgstr ""
730+ "IEEE 754 binary16「半精度」型別是在 2008 年的 `IEEE 754 標準 <ieee 754 standard_>`_\\ "
731+ "修訂版中引入的。它有一個符號位元、5 位元指數和 11 位元精度（明確儲存 10 位元），\\ "
732+ "可以全精度表示大約 ``6.1e-05`` 到 ``6.5e+04`` 之間的數字。此型別未被 C 編譯器\\ "
733+ "廣泛支援：在典型機器上，unsigned short 可以用於儲存，但不能用於數學運算。\\ "
734+ "請參見 Wikipedia 上的\\ `半精度浮點數格式 <half precision format_>`_ 頁面以取得\\ "
735+ "更多資訊。"
718736
719737#: ../../library/struct.rst:324
720738msgid "When packing, ``'x'`` inserts one NUL byte."
721- msgstr ""
739+ msgstr "打包時，``'x'`` 插入一個 NUL 位元組。 "
722740
723741#: ../../library/struct.rst:327
724742msgid ""
@@ -733,6 +751,12 @@ msgid ""
733751"character consumes ``count`` bytes, but that the string returned can never "
734752"contain more than 255 bytes."
735753msgstr ""
754+ "``'p'`` 格式字元編碼一個「Pascal 字串」，意思是儲存在 *固定位元組數* 中的短變長\\ "
755+ "字串，由計數指定。儲存的第一個位元組是字串的長度，或 255，取較小者。字串的位元組\\ "
756+ "在其後。如果傳遞給\\ :func:`pack` 的字串太長（長於計數減 1），則只儲存字串的前\\ "
757+ "``count-1`` 個位元組。如果字串短於 ``count-1``，則用空位元組填充，使得總共使用\\ "
758+ "恰好 count 個位元組。請注意，對於\\ :func:`unpack`，``'p'`` 格式字元消耗 ``count``\\ "
759+ "個位元組，但回傳的字串永遠不能包含超過 255 個位元組。"
736760
737761#: ../../library/struct.rst:339
738762msgid ""