System Description
Camera Name and Model: 2x Blackfly S (USB3, connected via Sync cable)
Operating System: Ubuntu 18.04.5
Spinnaker Version: 2.2.0.48
ROS Version: Melodic

Computer details
Processor: Nvidia AGX Xavier
RAM: 32GB

Multiple Cameras Only
How is the triggering setup? Master, Master/Slave, Default, see below

For USB 3.0 cameras:
On same USB 3.0 bus or different buses? Same bus
Is the USB 3.0 hub externally powered? Yes

Do the cameras work with SpinView?
Yes

Describe the bug
I can't acquire camera images when the camera is in master SpinView configuration on a Jetson AGX. Ros error is:

[FATAL]: Spinnaker: Failed waiting for EventData on NEW_BUFFER_DATA event. [-1011]
Likely reason is that slaves are not triggered. Check GPIO cables

I have two Blackfly S cameras and have tested many configurations on a Jetson AGX and x86 laptop. On the x86 laptop, I can publish the two camera streams when in default Flir camera settings, publish the two camera streams when in Master/slave configuration, and publish one camera stream when in Master configuration.

On the Jetson AGX, I can build spinnaker_sdk_camera_driver, following the steps laid out in#89. Within SpinView, I can see the two camera stream when in default/default, two streams in master/slave, and single stream in master configuration. I can launch spinnaker_sdk_camera_driver and see the stream(s) when in default camera configuration(s). However, when I launch ros with the camera in master or master/slave configurations, ros errors out.

The above variations account for the related yaml files and such. Given the variations run on the x86 machine, I trust the configurations and connections are set appropriately. But I can't resolve why the ros launch errors on master configuration, especially given SpinView streams.