Repository files navigation

see new efiGA-B85M-D3H

macOS version: 13.0.0 (20A5395g)OpenCore version: 0.9.4

• [Bootloader] OpenCore
• [Driver] OpenRuntime
• [Driver] HFSPlus
• [Kext] Lilu
• [Kext] VirtualSMC
• [Kext] WhateverGreen
• [Kext] AppleALC

• High Sierra (10.13.x)
• Mojave (10.14.x)
• Catalina (10.15.x)
• Big Sur (10.16/11.4)
• Monterey (12.1)
• Ventura (13.0)

1. Make your USB installer withthis guide
2. Clone the repository and paste "BOOT" and "OC" directories into your's pendrive "EFI" folder
3. DownloadGenSMBIOS to generate unique SMBIOS information. Run it and selectGenerate SMBIOS, as the model selectiMacPro1,1.
4. Open config.plist withProperTree and go to PlatformInfo > Generic. Set MLB (Board Serial), SystemSerialNumber (Serial) and SystemUUID (SmUUID) to generated values. Change ROM to your network card's MAC address without the: character.How to get MAC Address?
5. Boot it!

You CAN NOT use SMBIOS from this repository, it MUST be unique for every macOS installation

If you have any problems with installation or booting your macOS, kernel panics or another system related issue check OC configuration guide
If something else isn't working properly (for example USB ports, iServices, DRM/Netflix) check Post-Install guide

• Creating USB installer:*click*
• OpenCore configuration:*click*
• Post-Install:*click*
• Troubleshooting:*click*
• ACPI patching:*click*
• USB mapping:*click*