Commit53e672e

committed

feat(zigbee): Update temp examples

1 parente41c6a9 commit53e672eCopy full SHA for 53e672e

File tree

-2

lines changed

libraries/Zigbee/examples
- Zigbee_Temp_Hum_Sensor_Sleepy
  - Zigbee_Temp_Hum_Sensor_Sleepy.ino
- Zigbee_Temperature_Sensor
  - Zigbee_Temperature_Sensor.ino

-2

lines changed

Lines changed: 5 additions & 2 deletions

Original file line number	Diff line number	Diff line change
`@@ -135,15 +135,18 @@ void setup() {`
`135`	`135`	`// Set minimum and maximum temperature measurement value (10-50°C is default range for chip temperature measurement)`
`136`	`136`	`zbTempSensor.setMinMaxValue(10,50);`
`137`	`137`
	`138`	`+// Set default (initial) value for the temperature sensor to 10.0°C to match the minimum temperature measurement value (default value is 0.0°C)`
	`139`	`+ zbTempSensor.setDefaultValue(10.0);`
	`140`	`+`
`138`	`141`	`// Set tolerance for temperature measurement in °C (lowest possible value is 0.01°C)`
`139`	`142`	`zbTempSensor.setTolerance(1);`
`140`	`143`
`141`	`144`	`// Set power source to battery, battery percentage and battery voltage (now 100% and 3.5V for demonstration)`
`142`	`145`	`// The value can be also updated by calling zbTempSensor.setBatteryPercentage(percentage) or zbTempSensor.setBatteryVoltage(voltage) anytime after Zigbee.begin()`
`143`	`146`	`zbTempSensor.setPowerSource(ZB_POWER_SOURCE_BATTERY,100,35);`
`144`	`147`
`145`		`-// Add humidity cluster to the temperature sensor device with min, maxandtolerance values`
`146`		`- zbTempSensor.addHumiditySensor(0,100,1);`
	`148`	`+// Add humidity cluster to the temperature sensor device with min, max, toleranceanddefault values`
	`149`	`+ zbTempSensor.addHumiditySensor(0,100,1,0.0);`
`147`	`150`
`148`	`151`	`// Set callback for default response to handle status of reported data, there are 2 options.`
`149`	`152`

Lines changed: 3 additions & 0 deletions

Original file line number	Diff line number	Diff line change
`@@ -68,6 +68,9 @@ void setup() {`
`68`	`68`	`// Set minimum and maximum temperature measurement value (10-50°C is default range for chip temperature measurement)`
`69`	`69`	`zbTempSensor.setMinMaxValue(10,50);`
`70`	`70`
	`71`	`+// Optional: Set default (initial) value for the temperature sensor to 10.0°C to match the minimum temperature measurement value`
	`72`	`+ zbTempSensor.setDefaultValue(10.0);`
	`73`	`+`
`71`	`74`	`// Optional: Set tolerance for temperature measurement in °C (lowest possible value is 0.01°C)`
`72`	`75`	`zbTempSensor.setTolerance(1);`
`73`	`76`

Comments

(0)