Repository files navigation

This was a side project to create a 3D printed mount for my watch. The mount is designed to be attached to a Bontrager BLNDR Stem Mount Trip Computer Ion 100 200 350 450 Comp Elite, shownhere. The mount is designed to hold a Garmin Fenix 3, but with a little toggling of parameters, you might be able to get it working for your own model.

• v1/: This directory includes both the Fusion 3D (.f3d) and STL (.stl) files. Which was designed to slide into the Bontrager BLNDR Stem Mount Computer plate.
• v2/: Contains the second iteration of the watch mount in STL format. This version was designed to be a little more secure and have a better fit.
• v3/: Contains the third iteration of the watch mount in STL format. Here, the print was designed to bolt into the mount base, removing the need for the plate.
• v4/: Contains the fourth iteration of the watch mount in STL format. This was designed to be as secure as possible and to be printed at the highest fill.

V4 is ready to be printed, make sure your print orientation is correct. You want to print it so it can handle the tension of the watch. Seehow not to print it.

To make your own modifications, you may have to start from the [v1 f3d](v1/Watch Mount v1.f3d) design.

MIT