Bootloader file specified but missing: C:\Users\kurte\Documents\Arduino\hardware\arduino-git\ArduinoCore-zephyr\bootloaders\zephyr-arduino_giga_r1_stm32h747xx_m7.binFile C:\Users\kurte\AppData\Local\arduino\sketches\214E5772910289678E088092E0CF3726/zephyr_GIGA_shield_touchpaint.ino.elf saved as C:\Users\kurte\AppData\Local\arduino\sketches\214E5772910289678E088092E0CF3726/zephyr_GIGA_shield_touchpaint.ino.elf-zsk.bin"C:\\Users\\kurte\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\zephyr-sketch-tool\\0.1.0/zephyr-sketch-tool" "C:\\Users\\kurte\\AppData\\Local\\arduino\\sketches\\214E5772910289678E088092E0CF3726/zephyr_GIGA_shield_touchpaint.ino.bin"File does not have an ELF header, adding empty spaceFile C:\Users\kurte\AppData\Local\arduino\sketches\214E5772910289678E088092E0CF3726/zephyr_GIGA_shield_touchpaint.ino.bin saved as C:\Users\kurte\AppData\Local\arduino\sketches\214E5772910289678E088092E0CF3726/zephyr_GIGA_shield_touchpaint.ino.bin-zsk.binUsing library Arduino_GigaDisplay_GFX at version 1.1.0 in folder: C:\Users\kurte\Documents\Arduino\libraries\Arduino_GigaDisplay_GFX Using library Adafruit GFX Library at version 1.12.1 in folder: C:\Users\kurte\Documents\Arduino\libraries\Adafruit_GFX_Library Using library Adafruit BusIO at version 1.17.2 in folder: C:\Users\kurte\Documents\Arduino\libraries\Adafruit_BusIO Using library Wire in folder: C:\Users\kurte\Documents\Arduino\hardware\arduino-git\ArduinoCore-zephyr\libraries\Wire (legacy)Using library SPI in folder: C:\Users\kurte\Documents\Arduino\hardware\arduino-git\ArduinoCore-zephyr\libraries\SPI (legacy)Using library Arduino_GigaDisplay at version 1.0.2 in folder: C:\Users\kurte\Documents\Arduino\libraries\Arduino_GigaDisplay Using library Portenta_SDRAM at version 1.0 in folder: C:\Users\kurte\Documents\Arduino\hardware\arduino-git\ArduinoCore-zephyr\libraries\Zephyr_SDRAM Using library ea_malloc in folder: C:\Users\kurte\Documents\Arduino\hardware\arduino-git\ArduinoCore-zephyr\libraries\ea_malloc (legacy)Using library Arduino_GigaDisplayTouch at version 1.0.1 in folder: C:\Users\kurte\Documents\Arduino\libraries\Arduino_GigaDisplayTouch "C:\\Users\\kurte\\AppData\\Local\\Arduino15\\packages\\zephyr\\tools\\arm-zephyr-eabi\\0.16.8/bin/arm-zephyr-eabi-size" -A "C:\\Users\\kurte\\AppData\\Local\\arduino\\sketches\\214E5772910289678E088092E0CF3726/zephyr_GIGA_shield_touchpaint.ino.elf"Sketch uses 11622 bytes (1%) of program storage space. Maximum is 786432 bytes.Global variables use 4024 bytes (0%) of dynamic memory, leaving 519600 bytes for local variables. Maximum is 523624 bytes.Performing 1200-bps touch reset on serial port COM5Waiting for upload port...Upload port found on COM5No DFU capable USB device available"C:\Users\kurte\AppData\Local\Arduino15\packages\arduino\tools\dfu-util\0.11.0-arduino5/dfu-util" --device ,0x2341:0x0366 -D "C:\Users\kurte\AppData\Local\arduino\sketches\214E5772910289678E088092E0CF3726/zephyr_GIGA_shield_touchpaint.ino.elf-zsk.bin" -a0 --dfuse-address=0x080E0000:leavedfu-util 0.11-arduino4Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.Copyright 2010-2021 Tormod Volden and Stefan SchmidtThis program is Free Software and has ABSOLUTELY NO WARRANTYPlease report bugs to http://sourceforge.net/p/dfu-util/tickets/Failed uploading: uploading error: exit status 74