Repository files navigation

These codes, based on EMVA Standard 1288, are intended to facilitate the characterization of cameras and image sensors.

The different parameters that describe the characteristics and quality of a sensor are gathered and coherently described in theEMVA 1288.

I would highly recommend that you carefully read and understand this document before starting any operation.

This standard illustrates the fundamental parameters that must be given to fully describe the real behavior of a sensor, together with the well-defined measurement methods to get these parameters.

The standard parameters are:

• Dark current (DC) [ADU/s]
• Quantum efficiency (QE) [%]
• Read noise (RON) [e-]
• Gain (K) [ADU/e-]
• Signal-to-noise ratio (SNR) [dB]
• Dynamic range (DR) [dB]
• Saturation (full-well) capacity [e-]
• Photo-Response Non-Uniformity (PRNU) [%]
• Dark Signal Non-Uniformity (DSNU) [e-]

For full documentation, please refer toCamera characterization Documentation

For the time being, QE, PRNU and DSNU will not be discussed further here.

The results of these tests will give you quantifiable information about the state of your current camera as well as providing a method to comparecameras, which may be valuable if you’re in the process of making a decision for a new purchase.

This image gives you an idea of the kind of results you can get with these codes. These tests have been performed on a CMOS camera (model: Basler acA1920-40gm).

Requirements: A list of Python libraries you'll need for this project.

• Fork this repo
• Clone to disk in a stable path, such as C or your user folder
• Edit the scripts to your liking
• If you find any problems or want to suggest modifications, create an issue.

EMVA •Camera Test Protocol w/ ImageJ

© NHL-BLicensed under theMIT License.