Keyboard Visualizer

OpenRGB Audio Visualizer for Windows, Linux, and MacOS

What about the old Keyboard Visualizer with Razer Chroma SDK, Corsair SDK, etc?

Download/Build

Windows

Linux

Settings

* Amplitude - How reactive the visualizer is to sound.  If it is not responding, or is responding with a low level,              increase this value.* Background Brightness - How bright the background layer is (0-100%)* Average Size - How many bars of input to combine, increase for a less detailed output that may look better on                 devices with low LED counts.* Decay - How much of the previous value is retained from step to step.  Higher values make the visualizer less          flickery but seem slower to react, while low values are fast and flickery.  (0-100%)* Delay - How many milliseconds to wait between each device update.  Lower values give a higher "frame rate"          but can cause flicker or other issues on certain setups.* Normalization Offset - Adjusts amplitude of bass frequencies, increase if your song lacks bass and decrease if                         your song is bass heavy* Normalization Scale - Amount to scale up each consecutive frequency bar over normalization offset, to amplify                        higher frequencies.  Increase if the right side of the visualizer is low.* Filter Constant - Amount of signal to blend per update, 0-1 floating point.  A value of 1 disables filtering                    and updates the spectrum every cycle, a value between 0 and 1 blends the new value with the                    previous value, slowing the response.  A value of 0 holds the existing value and ignores                    new samples.* FFT Window Mode - Select between None, Hamming, Hanning, and Blackman windowing functions                    (see https://en.wikipedia.org/wiki/Window_function for the math behind FFT windowing)* Background Mode - Select between various static and animated background colors and patterns* Foreground Mode - Select between various static foreground colors and patterns* Single Color Mode - Select between various color options for devices that use the single color effect* Average Mode - Select between discrete bars (binning) or a smoothed line (low pass) output* Animation Speed - Speed of background and foreground animated patterns, default 100, can be negative                    to reverse the direction of the pattern, can be increased to speed up the pattern or                    decreased to slow it down.* Filter Constant - A low pass filter constant between 0 and 1.  A value less than 1 slows the response of the                    visualization, which makes for a less jumpy, smoother effect the lower the value is.* Background Timeout - How long to wait (in multiples of 10 milliseconds) before fading the background in.

Command Line Options and Settings File

Available command line commands:    help              - Display this message and quit    startminimized    - Start in system trayAvailable command line arguments:    Usage: argument1=value1 argument2=value2 ...    amplitude         - Adjust the amplitude of the visualizer    bkgd_bright       - Adjust the background brightness    avg_size          - Number of points to average    decay             - Percentage of value to decay every step    delay             - Milliseconds between each device update    nrml_ofst         - Normalization offset, floating point value    nrml_scl          - Normalization scale, floating point value    fltr_const        - Low pass filter constant, floating point value 0-1    window_mode       - FFT windowing mode selector, values are:                      - 0:  No windowing                      - 1:  Hanning window                      - 2:  Hamming window                      - 3:  Blackman window    bkgd_mode         - Background mode, values are:                      - 0  Black                      - 1  White                      - 2  Red                      - 3  Orange                      - 4  Yellow                      - 5  Green                      - 6  Cyan                      - 7  Blue                      - 8  Purple                      - 9  Green/Yellow/Red                      - 10 Green/White/Red                      - 11 Blue/Cyan/White                      - 12 Red/White/Blue                      - 13 Rainbow Bars                      - 14 Rainbow Bars Inverse                      - 15 Original                      - 16 Rainbow                      - 17 Color Wheel                      - 18 Spectrum Cycle    frgd_mode         - Foreground mode, values are:                      - 0  Black                      - 1  White                      - 2  Red                      - 3  Orange                      - 4  Yellow                      - 5  Green                      - 6  Cyan                      - 7  Blue                      - 8  Purple                      - 9  Green/Yellow/Red                      - 10 Green/White/Red                      - 11 Blue/Cyan/White                      - 12 Red/White/Blue                      - 13 Rainbow Bars                      - 14 Rainbow Bars Inverse                      - 15 Original                      - 16 Rainbow                      - 17 Color Wheel                      - 18 Spectrum Cycle    single_color_mode - Single color mode, values are:                      - 0  Black                      - 1  White                      - 2  Red                      - 3  Orange                      - 4  Yellow                      - 5  Green                      - 6  Cyan                      - 7  Blue                      - 8  Purple                      - 9  Background                      - 10 Follow Background                      - 11 Follow Foreground    avg_mode          - Visualizer averaging mode                      - 0:  Binning                      - 1:  Low-pass filtering    anim_speed        - Animation Speed (percent)    server            - Configure this instance as a server for synchronization                      -  Takes what port to serve on as argument, i.e. server=1234    client            - Configure this instance as a client for synchronization                      -  Takes the IP/hostname of the server and port as arguments,                      -  i.e. client=192.168.1.100,1234

Available Visual Effects

* Spectrograph - Shows vertical bars for each frequency in the audio* Bar - Shows a single bar representing bass frequencies* Single Color - Brightness and color represent strength of bass frequencies

Donations