| VCP-1 | |
|---|---|
 | |
| Role | USAAS Pursuit prototype Type of aircraft |
| Manufacturer | Engineering Division |
| Designer | Alfred V. Verville |
| First flight | 11 June1920 |
| Number built | 2 |
| Variants | Verville-Packard R-1 |
TheVerville VCP was an American single-enginedbiplanefighter aircraft of the 1920s. A single example of the VCP-1 was built by theUnited States Army Air Service'sEngineering Division, which was later rebuilt into a successful racing aircraft, while a second, modified fighter was built as thePW-1.
In 1918, Virginius E. Clark, in charge of the Plane Design section of the U.S. Army Air Service's Engineering Division andAlfred V. Verville, who had recently joined the Engineering Division from private industry, started design of a single-seat fighter (known as "pursuit" aircraft to the U.S. Army), the VCP-1 (Verville-Clark Pursuit).[1]
Drawing from the experience of the French and theirSPAD S.XIII, the desire was to make a sleeker and more maneuverable fighter.[2] The VCP-1 was powered by a Wright-built 300 hp (220 kW)Hispano-Suiza 8V-8 engine and had tapered single-bay biplane wings. The fuselage was amonocoque structure constructed ofplywood, while the wings were of wood and fabric construction. The engine was cooled with an unusualannular radiator.[1][3][4]
Two were built, but only one was flown, making its maiden flight on June 11, 1920.[1] The aircraft demonstrated good performance, reaching 156 mph (251 km/h), but the radical annular radiator was unsuccessful, having to be replaced to a more conventional unit. Because of its performance, it was decided to modify the VCP-1 to a racing aircraft, replacing the Wright-Hispano engine with a 660 hp (490 kW) Packard 1A-2025V12 engine, becoming theVCP-R (later again rebuilt as the Verville R-1 Racer).[3][5]
In 1920, work commenced on two new fighter aircraft based on the VCP-1, featuring an easier to build fabric covered steel-tube fuselage instead of the plywood monocoque of the VCP-1. The aircraft retained the tapered wings of the VCP-1 and was powered by a 350 hp (260 kW) Packard 1A-1237 engine, cooled by a tunnel-style radiator located under the engine.[6][7]
The new design was initially known as the VCP-2, but was soon redesignated as PW-1 (Pursuit, Water-Cooled[8]) in the U.S. Army Air Service's new designation system. The first aircraft was used for static testing, while the second prototype flew in November 1921,[6] reaching a speed of 146 mph (235 km/h). It was rebuilt later that year with a new untapered set of wings using aFokker style thickairfoil, becoming the PW-1A, but performance was reduced, and the aircraft was refitted with its original wings, reverting to the designation PW-1.[3][9]
While plans were prepared for more powerful versions fitted with revised wings, no production ensued.[3][9]
The VCP-R made its racing debut at the 1920 Gordon Bennett Cup race held atÉtampes nearParis on 28 September. Its radiator proved to be insufficient to deal with the powerful, high-compression Packard engine, however, and it retired after the first lap.[4][10] It was taken back to the U.S. and quickly modified with a larger radiator for entry in thePulitzer Trophy air-race, held atMineola, New York on 25 November that year. This time it was successful, winning the race at a speed of 156.5 mph (251.9 km/h).[4][11]
The U.S. Armed Forces did not compete in the 1921 Pulitzer Trophy race,[12] but for the 1922 race the VCP-R was fitted with a revised tail, becoming the R-1. It finished in sixth place at a speed of 179 mph (288 km/h).[4][5][13]
Data from The American Fighter[14]
General characteristics
Performance
