Vaccine storage relates to the propervaccine storage and handling practices from their manufacture to the administration in people.[2] The general standard is the 2–8 °Ccold chain for vaccine storage and transportation. This is used for all current USFood and Drug Administration (FDA)-licensed human vaccines and inlow and middle-income countries. Exceptions include some vaccines forsmallpox, chickenpox, shingles and one of the measles, mumps, and rubella II vaccines, which are transported between −25 °C and −15 °C.[3][4] Some vaccines, such as theCOVID-19 vaccine, require a cooler temperature between −80 °C and −60 °C for storage.[4]
In 1996, theWorld Health Organization (WHO) decided to spread vaccines worldwide.[5] This urges researchers to design storage for vaccines without losing its potency. Since then, the production of vaccines has spiked, and various kinds of vaccines have their handling practices. WHO has set standards to ensure cold chain and has different types of storage, including refrigerators, freezers, cold boxes, and vaccine carriers. Different types of thermometers are also used because a slight temperature change could result in loss of potency.[6][7] The storage are necessary to improve vaccine shelf life and transport vaccine worldwide.
Vaccine storage was first developed in the early 1960s, when the infectioussmallpox diseaseoutbreaks. During this time, vaccine technology was available and offered for protection. Sincesmallpox has been one of the deadliest diseases known, the World Health Organization (WHO) prepared to launch a campaign to spread the vaccines and end smallpox in 1966.[5] It was not until 1974 whereWHO first introduced the Expanded Programme on Immunization (EPI).[8] The main goal was to makeimmunization available to every child worldwide by 1990. Immunization of six illnesses was being transported, includingtuberculosis,diphtheria,pertussis,tetanus,measles, andpolio.[5][9] Dr. Rafe Henderson, the first director of EPI, designed a plan to deliver temperature-sensitive vaccines across dozens of countries safely.[10] It was an important step to ensure that the vaccines were maintained in their determined conditions and guides towards the development of the cold chain.[11] The WHO supported countries worldwide to ensure thevaccinecold chain is maintained.[3][5]
The cold chain has been implemented for years. After EPI was initiated, over 700,000measles deaths were prevented, and millions of the target diseases have been prevented.[9] There has been a huge milestone in the vaccine industry asscientists create more vaccines for new types ofdiseases. Therefore, it has a direct impact on the cost oftransportation and different kinds ofrefrigerator storage either at +2° to +8 °C or +20° to +25 °C.[5] This urge EPI to create a strategy to encompasses both vaccines andmedicines to be able to sustain their components without the need of storage. The term 'cold chain' has now been replaced with 'supply chain'.[5] The current system of vaccine cold chain still continues for delivering particular vaccines. WHO has made improvements by introducing the "controlled temperature chain" (CTC), which is an innovative approach allowing thevaccine to be taken out of the cold chain for a limited period of time, but CTC is still in the development process and will not be available for all vaccines for many years.[12] Nowadays, engineers is still thinking of a way to eliminate refrigeration at +2 to +8C from the entire supply chain for all vaccines. With the initiatives of reducing temperature sensitivity of vaccines and regulation permits, it could eliminate the need for refrigeration in the supply chain. It will be suitable for anundeveloped country as less handling of vaccines needs to be done.[5][12][11][9]
The cold chain has been one of the most reliable supply chains for transporting vaccines around the globe. Since vaccines are sensitive biological products, proper storage and handling of vaccines are important to ensure the potency of vaccines is not lost.[2][3][11] Vaccines must be continuously monitored as each has different reactivity to low temperature, high temperature, and light.[13]
The majority of vaccines required storage temperature of +35° to +46 °F (+2° to +8 °C) and must not be exposed to freezing temperature.[7] Temperature too cold can result in an irreversible reaction that reduces vaccines potency and loss in adjuvant effect. Certain vaccines contain adjuvants (aluminum) that willprecipitate when exposed to freezing temperatures.[14] Temperature too hot could also result in wanted viruses permanently degrading and losing potency. However, the effects are usually smaller, gradual, and predictable than from freezing temperatures.[15] Visible signs ofphysical changes after exposure to undesirable temperature are not necessary to result in a decrease of vaccine potency.[6]
Health facilities use storage called purpose-built units (also referred to pharmaceutical-grade units). These refrigerators or freezers are specifically designed for the storage of biologics, including vaccines. These units differ from standard household-grade units since it hasmicroprocessor-based temperature control with a digital temperature sensor (thermistor,thermocouple, or resistance temperature detector), and fan-forced air circulation to promote uniform temperature around the unit.[14] These storage are usually a stand-alone refrigerator or freezers because they perform better at keeping the temperature constant.[citation needed]
A Household-grade refrigerator can also be an acceptable alternative to purpose-built units. However, thefreezer compartment of this type is not recommended to store vaccines, and vaccines should be stored centrally inside the refrigerator. Many combination units cool the refrigerator using air from the freezer, resulting in different temperature zones inside the fridge.[7] Placing vaccines near the cold air output from the freezer could cause too low temperature, and placing it at the very bottom could cause too high temperature. It is important not to place vaccines near the storage unit doors because it affects the temperature and exposes vaccines to light, reducing potency for some vaccines.[15]
WHO has set standards to ensure the cold chain types of equipment can sustain different vaccines in health facilities.
.jpg)
Refrigerators are the most common type of storage in health facilities as they can hold many vaccines in one single unit. This storage will help temperature-sensitive vaccines to withstand their components, and the surrounding area will always remain between +2° and +8 °C. In developed countries, electric refrigerators (compression units) are wildly used as there is an electricity supply for at least 8 hours per day. If the country doesn't have sufficient electricity, the solar energy refrigerator (photovoltaic units) or bottled gas/kerosene (absorption units) is also reliable. It is important to keep the desired temperature in any of the models in any circumstances and should not be changed.[2][17][13]
Freezers act the same way as refrigerators but for extreme temperatures. Its minimum temperature depends on the manufacture. Typically this storage is to store frozen vaccines and maintained temperature between -80 and -15C. Health facilities use purpose-built or pharmaceutical-grade units and vary in size.[18]
Dippin' Dots, a manufacturer of frozen desserts, had previously created equipment to preserve its products. This equipment was subsequently utilized by developers of the COVID-19 vaccine for transportation and storage of the vaccine.[19][20]
.jpg)
Cold boxes are typically used to carry vaccines around the area. It is a self-supporting container with insulation and ice-packs surrounding the interior to keep vaccines at low temperatures.[22] Unlike the refrigerator, the cold box has limited time to maintain temperatures below +10 °C, normally 48–96 hours.[23] It comes in many different types and shapes, and this storage is very useful for the transportation of vaccines in or out of the health facility.[13]
Vaccine carriers are similar to cold boxes, but they are smaller and easier to carry around. This small carrier is also packed with ice packs to keep the vaccine at a low temperature.[13] However, they do not stay cold for as long as cold boxes, at most 36–48 hours.[22] It is generally used for transporting from a health facility to outreach sites.[23]
Water packs are flat and leak-proof plastic containers used in the interiors of cold boxes and vaccine carriers.[24] These containers are set to the appropriate temperature depending on the type of vaccine being transported. The temperature could range from -10° to +24 °C and does not last that long before coming back to the same temperature as the surroundings.[13]
Foam pads are used to cover the lid of cold boxes and vaccine carriers, protecting the vaccine vials from damage during transportation and external heat. It is just a soft sponge that ensures the vials stay in place and prolong the desired temperature inside the containers.[13][25]
Temperature plays a crucial part in maintaining the potency of vaccines.[6] Although the risk of storage cooler malfunction is low, it is better to check than the need to replace vaccines wasted due to the loss of potency. Temperature monitoring needs to take place in both storage units and transport units. The refrigerator should maintain a temperature between 2° and 8 °C (36° and 46 °F). Freezers should maintain a temperature between -50° and -15 °C (-58° and +5 °F).[14]Thermometers are useful to monitor the temperature by placing at the storage unit's central location, adjacent to the vaccines.
Every vaccine storage unit must have a temperature monitoring device. There are many different thermometers, including standard fluid-filled, min-max, and continuous temperature monitoring devices. Each type of thermometer has its advantages and disadvantage.[15]
| Thermometer Type | Advantages | Disadvantages |
|---|---|---|
| Standard fluid-filled[14] |
|
|
| Min-max[14] |
|
|
| Continuous temperature monitoring device[14] |
|
|
Health facilities use thedigital data logger (DDL) as their temperature monitoring device. This continuous temperature monitoring device uses a buffered temperature probe, the most accurate way to measure actual vaccine temperature.[26][27] The DDL also includes details on how long a unit has been operating outside the temperature range and record all temperatures at present intervals. Temperature probes are also designed to prevent false readings by protecting the thermometer from sudden temperature changes when opening a refrigerator door.[28]
The breakthrough of vaccines has changed the health industry, and numerous vaccines are still being developed nowadays. Each type of vaccine has its standard to keep wanted components intact.
| Vaccines | Vaccine type | Formulation | Adjuvent | Recommended temperature | Description |
|---|---|---|---|---|---|
| Cholera[29] | Inactivated bacteria | Liquid +/- buffer granules | None | 2° - 8 °C | Freeze sensitive |
| COVID-19[30][4] | mRNA | Liquid | None | -90° - -60 °C | Not freeze sensitive but unstable when exposure to heat |
| Hepatitis A (HAV)[31] | Inactivated virus | Liquid | Usually AlOH3 | 2° - 8 °C | relatively heat stable (resistance to 25° - 37 °C for several months), but are freeze sensitive |
| Hepatitis B (HepB)[32][33] | Recombinant protein | Liquid | AlOH3 | 2° - 8 °C | one of the most heat-stable vaccines (resistance for months at 20° -25 °C and weeks at 37 °C), but also freeze sensitive. |
| Human papillomavirus (HPV)[34] | Recombinant protein (VLP) | Liquid | Al hydroxylphosphate sulfate | 2° - 8 °C | Very stable. They are heat resistant and do not affect overall shelf life, but are freeze and light sensitive. |
| Influenza[35] | Inactivated (split/whole) | Liquid | None | 2° - 8 °C | Can be stable for several weeks at room temperature. But are freeze sensitive |
| Live attenuated virus | Liquid orlyophilized | None | 2° - 8 °C | Can be damaged by freezing and have short shelf life. | |
| Measles[36] | Live attenuated virus | Lyophilized | None | -50° - 8 °C | Moderately stable. Potency is retained at high temperature and also can be stored frozen at -20 °C. |
| Meningococcal[37] | PS | Lyophilized | None | 2° - 8 °C | Not freeze sensitive as most of the vaccines need to be stored frozen. Have good stability at room temperature. |
| PS-PVC | Liquid or Lyophilized | AlOH3/None | 2° - 8 °C | Some of the vaccines are not freeze sensitive and appear to be relatively stable. | |
| Polio[38] | Live attenuated virus | Liquid | None | -20° - 8 °C | Can be frozen and stable at -20 °C. Relatively heat sensitive. |
| Inactivated virus (whole) | Liquid | None | 2° - 8 °C | Freeze sensitive but relatively heat stable. | |
| Rabies[39] | Inactivated virus (whole) | Usually lyophilized | Usually none | 2° - 8 °C | very stable in lyophilized form and not freeze sensitive |
| Rubella[36] | Live attenuated virus | Lyophilized | None | -50° - 8 °C | Can be stored at -20 °C and more stable than measles vaccines |
| Tetanus toxoid[40] | Purified protein | Liquid | Aluminum based | 2° - 8 °C | Very heat stable and resistant to temperature up to 55 °C, but freeze sensitive. |
| Tuberculosis[41] | Live attenuated bacterium | Lyophilized | None | 2° - 8 °C | Not freeze and light sensitive |
| Varicella[42][43] | Live attenuated virus | Lyophilized | None | -50 °C - -15 °C | Not freeze sensitive. but relatively unstable at elevated. temperature |
Due to the abundant number of vaccines, pharmaceutics combines two or more vaccines to save more time. These types of vaccines might change in storage temperature recommendation due to the additional stability of each vaccine.
| Vaccine | General name | Vaccine type | Formulation | Adjuvant | Recommended temperature | Description |
|---|---|---|---|---|---|---|
| Diphtheria, tetanus, pertussis[44] | DTaP | Purified protein | Liquid | Aluminum based | 2° - 8 °C | Freeze sensitive |
| DTwP | Purified protein, Inactivated bacteria | Liquid | Aluminum based | 2° - 8 °C | Freeze sensitive but relatively heat stable | |
| Hepatitis A and B[45] | Recombinant protein, inactivated virus | Liquid | Aluminum based | 2° - 8 °C | Freeze sensitive but relatively heat stable | |
| Measles, mumps, and rubella[36] | MMR | Live attenuated virus | Lyophilized | None | -50° - 8 °C | Not freeze sensitive and relatively stable in the lyophilized state. |