AV12 engine is a twelve-cylinderpiston engine where two banks of six cylinders are arranged in aV configuration around a commoncrankshaft. V12 engines are more common thanV10 engines. However, they are less common thanV8 engines.
The first V12 engine was built in 1904 for use inracing boats. Due to the balanced nature of the engine and the smooth delivery ofpower, V12 engines were found in early luxury automobiles, boats, aircraft, and tanks. Aircraft V12 engines reached their apogee during World War II, after which they were mostly replaced byjet engines. In Formula One racing, V12 engines were common during the late 1960s and early 1990s.
Applications of V12 engines in the 21st century have been as marine engines, in railway locomotives, as large stationary power as well as in some European sports and luxury cars.
Each bank of a V12 engine essentially functions as astraight-six engine, which by itself has perfect primary and secondaryengine balance. A four-stroke V12 engine has even firing order at V-angles of 60, 120, or 180 degrees[1][better source needed] Many V12 engines use a V-angle of 60 degrees between the two banks of cylinders.[2] V12 engines with other V-angles have been produced, sometimes using splitcrankpins to reduce the unbalanced vibrations. The drawbacks of V12 engines include extra cost, complexity, friction losses, and external size and weight, compared with engines containing fewer cylinders.
At any given time, three of the cylinders in a V12 engine are in their power stroke, which increases the smoothness of the power delivery by eliminating gaps between power pulses.
A V12 engine with a 180 degree V-angle is often called aflat-twelve engine. These are also sometimes called 'boxer twelve' engines, however this terminology is incorrect for the majority of 180-degree V12 engines, since they use shared crankpins and are therefore not configured as true boxer engines.[3]
Theoretically, the rotating parts of a V12 racing engine could be lighter than a crossplane V8 engine of similar displacement due to the V12 engine not requiring counterweights on the crankshaft or as much inertial mass for the flywheel. In addition, the exhaust system of a V12 engine is much simpler than would be required for a crossplane V8 engine to achieve pulsed exhaust gas tuning. However, the use of V12 engines in motor racing is uncommon in the 21st century.
A 60-degree V12 engine is typically narrower than a 90-degree V6 or V8 engine of similar displacement. However, the V12 engine is usually longer than V6 and V8 engines. The added length often makes it difficult to fit a V12 engine into a passenger car, but the length is not typically a problem for trucks and stationary applications. Due to its narrower width, the V12 is common as locomotive, armoured tank, and marine engines. In these applications, the width of the engine is constrained by tightrailway clearances orstreet widths, while the length of the vehicle is more flexible.
In twin-propeller boats, two V12 engines can be narrow enough to sit side by side, while three V12 engines are sometimes used in high-speed three-propeller configurations. Large, fast cruise ships can have six or more V12 engines. In historic piston-engine fighter and bomber aircraft, the long, narrow V12 configuration used in high-performance aircraft made them more streamlined than other engines, particularly the short, wideradial engine.
The first V-engine (a V-twin design) was built byDaimler in 1889,[4] then the first V8 engine was built byAntoinette in 1903. These were followed by the first V12 engine in 1904, which was built by Putney Motor Works in London for use in racing boats.[5] Known as the "Craig-Dörwald" engine after Putney's founding partners,[6] the V12 engine was based on Putney's existing two-cylinder engine with aflathead design, a V-angle of 90 degrees and an aluminium crankcase. As in many marine engines, the camshaft could be slid longitudinally to engage a second set ofcams, giving valve timing that reversed the engine's rotation to achieveastern propulsion.[7] The engine had a displacement of 18.4 L (1,120 cu in) a weight of 430 kg (950 lb) and developed 12 m (40 ft) racing boats, but little is known of its racing achievements.[5]
Two more V12s appeared in the 1909-1910 motor boat racing season. The Lamb Boat & Engine Company in the United States built a 25.5 L (1,559 cu in) engine for the company's 10 m (32 ft) 'Lamb IV' boat. The Orleans Motor Company built a massive 56.8 L (3,464 cu in) flathead V12 engine with a power output quoted as "nearly 298 kW (400 bhp)". In 1914,Panhard built two 38.6 L (2,356 cu in) V12 engines with four valves per cylinder, which were designed for use in racing boats.[5]
Large V12 diesel engines are common in modern cruise ships, which may have up to six such engines.[8] An example of a currently produced V12 marine engine is theWärtsilä 46F engine, where the V12 version has a displacement of 1,157 L (70,604 cu in) and a power output of 14,400 kW (19,300 hp).[9]
Renault introduced the first V12 engine for aircraft with their90 hp model of 1912. This engine had a V-angle of 60 degrees, air cooling and anintake over exhaust (F-head) valve arrangement. The propeller was driven from the front end of the camshaft, thus spinning the propeller speed at half the speed of a typical crankshaft driven propeller, in order to improve the propeller efficiency.[5]
In March 1914, a prototype version of theSunbeam Mohawk V12 engine was unveiled in the United Kingdom, based on the 'Toodles V' motor racing engine. The production version was rated at 168 kW (225 hp) at 2,000 rpm, making it the most powerful airplane engine in Great Britain at the outbreak of World War I.[5] During and after World War I, various companies in the United States produced theLiberty L-12 engine. In Austria, theAustro Daimler V12 engines were used by the large flying boats of the Naval Air Force and produced up to 257 kW (345 hp). By the end of World War I, V12s were well established in aviation, powering some of the newest and largest fighter and bomber airplanes.
After World War I, manyZeppelins used V12 engines built byMaybach andDaimler. V12 engines powered the first transatlantic crossings by the Curtiss NC flying boats (using four Liberty L-12 engines), the first non-stop transatlantic crossing in a Vickers Vimy (using twoRolls-Royce Eagle engines) and the first transatlantic crossing by an airship in the R-34 class airship (using fiveSunbeam Maori engines).
V12 engines reached their apogee duringWorld War II with engines such as the BritishRolls-Royce Merlin andRolls-Royce Griffon, the SovietKlimov VK-107 andMikulin AM-38, the AmericanAllison V-1710, and the GermanDaimler-Benz DB 600 andJunkers Jumo. These engines generated about 750 kW (1,000 hp) at the beginning of the war and over 1,100 kW (1,500 hp) at their ultimate evolution stage. This rapid increase in power outputs was due to technology such as multi-speedsuperchargers and highoctane fuels, and the V12 layout was commonly adopted due to its low vibrations so that the powerful engines did not tear apart the light airframes of fighters.
The Allied forces used V12 engines with an "upright" design, while many German engines (aside from theBMW VI, which was designed prior to World War II), used aninverted engine design, which had a lower centre of gravity and improved pilot visibility for single-engined designs. The only two American-design inverted V12 engines of any type to see even limited service in World War II were the air-cooledRanger V-770, which was used in aircraft that were only used for training purposes within the United States, such as theFairchild AT-21 Gunner, and liquid-cooledContinental I-1430hyper engine, which was used for experimental aircraft asXP-67,XP-49 and others.
The Rolls-Royce Merlin V12 engine was used in several British aircraft including theHawker Hurricane andSupermarine Spitfire fighters, and theAvro Lancaster andde Havilland Mosquito bombers. The Hurricane and Spitfire played vital roles in theBattle of Britain. The long, narrow configuration of the V12 contributed to good aerodynamics, while its smoothness allowed its use with relatively light and fragile airframes.
In the United States, the Rolls-Royce Merlin engine was produced under license by Packard Motor Car Company, which was used in theP-51 Mustang fighter. This engine was also incorporated into some models of the Curtiss P-40, specifically the P-40F and P-40L. Packard Merlins powered Canadian-built Hurricane, Lancaster, and Mosquito aircraft, as well as the UK-builtSpitfire Mark XVI, which was otherwise the same as the Mark IX with its British-built Merlin. TheAllison V-1710 was the only liquid-cooled V12 engine designed in the United States that was used on active service during World War II. It was initially used in theP-38 Lightning, but theturbosupercharger system required bulky ductwork and had poor high-altitude performance. In 1943, a version using a more conventional mechanicalsupercharger began production.
After World War II, V12 engines became generally obsolete in aircraft due to the introduction ofturbojet andturboprop engines that had more power for their weight, and fewer complications.
In automobiles, V12 engines are less common than engines with fewer cylinders, due to their size, complexity, and cost. They have been mostly used for expensive sports and luxury cars thanks to their power, smooth operation, and distinctive sound.
One of the earliest recorded uses of V12 engines in automobiles was in October 1913, when a custom-built racing car competed at the Brooklands circuit in the United Kingdom. The car was entered byLouis Coatalen, who was chief engineer of the Sunbeam Motor Car Company. It was named 'Toodles V' (after Coatalen's pet name for his wife) and achieved several speed records in 1913 and 1914.[5] The V12 engine had a displacement of 9.0 L (549 cu in), an aluminum crankcase, iron cylinders with L-shaped combustion chambers, a cam-in-block valvetrain and a V-angle of 60 degrees. Each bank of the engine consisted of twocylinder blocks with three cylinders each. Valve clearance was set by grinding the relevant parts, the engine lacking any easy means of adjustment. This reflected the intention for the engine to be later used in aircraft since any adjustment method that could go wrong in flight was to be avoided. As initially built, the V12 was rated at 150 kW (200 bhp) at 2,400 rpm and weighed approximately 340 kg (750 lb).
Amongst the first production cars to use a V12 engine were the 1915Packard Twin Six,[10][11] the 1915National V12 engine[12] and the 1917Weidely Pathfinder;[13] all of which were built in the United States.
During the late 1920s, the number of marques offering V12 engines for their passenger cars increased and peaked in the 1930s. The lack of vibration and sound, inherent smoothness, and increased power were cited as key benefits for V12 engines.[14] Automobile petrol produced in the 1920s and 1930s had loweroctane rating, leading to lower engine performance ratings, andvibration isolating engine mounts were rarely fitted to the passenger cars in the 1920s and the early 1930s. Adding more cylinders to the engine was one of several techniques for performance increase.
European passenger cars with V12 engines were:
American passenger cars with V12 engines were:
Economic hardships caused by theGreat Depression meant that all American automakers except for Lincoln had discontinued production of V12 engines by the end of the 1930s. Lincoln themselves would cease V12 production in 1948, and no American automaker has built V12 engines since. Improvements in engine design, namely combustion chamber, piston form, fuel delivery system, and such enabled the lighter and cheaper V8 engines to surpass V12 engines in performance.
Following the end of the Second World War, the economic austerity and changes in taste in many European countries led to the demise of luxury automobiles with V12 engines in the 1940s and 1950s. Lincoln continued the limited production of luxury cars with V12 engines from 1946 to 1948. The American manufacturers focused on continuously improving V8 engines and their performances through the 1950s, leading to the first "horsepower war" in the 1960s.
In Italy,Enzo Ferrari, who had long admired the V12 engines ofPackard,Auto Union, and his former employerAlfa Romeo,[19] introduced his first passenger car,Ferrari 166 Inter, in 1948 and fitted it with 2.0 L (122 cu in)Colombo V12 engine. Dissatisfied with the reliability and crudeness of his Ferrari 250 GT,Ferruccio Lamborghini wanted to develop his own passenger cars that were more cultured and more reliable than the cars produced by Ferrari. His first passenger car, a grand tourer, was350 GT with 3.5 L (214 cu in) DOHC engine. Both manufacturers have a long history of producing vehicles with V12 engines, which continues uninterrupted to this day.
Cadillac experimented with V12 engines in 1963 and 1964 as a potential engine option for its first-ever front-wheel-drive car,Cadillac Eldorado. However, Cadillac was unsatisfied with the performance of its V12 engine, having little advantage over the large displacement V8 that was cheaper to enlarge for more power.[20]
In Europe, several manufacturers added V12 engines to their line-up, as listed below:
In the United States, no mass-produced V12 engines have been built since the 1940s, with U.S. manufacturers preferring to use large displacement V8 engines instead.
Japanese manufacturers rarely produce engines with large displacements, therefore V12 engines are very rare. The sole Japanese V12 engine is the 1997–2016Toyota GZ engine, a 5.0 L (305 cu in) DOHC design which was used in theSecond generation Toyota Century limousine.[28][29]
In China, the 2009Hongqi HQE limousine, powered by a 6.0 L (366 cu in) DOHC V12 engine, is the sole Chinese car to be produced with a V12 engine.[citation needed][30]
V12 engines have often been used in Formula One, particularly from the1966 season to the1969 season. The first V12 engine used in Formula One was in the 1964Honda RA271 racing car, and continued through to the 1968Honda RA301 racing car. The 1966 season saw V12 engines become popular, with new V12 engines from Ferrari, Maserati, and Weslake. Ferrari's engine debuted in theFerrari 312 racing car and was used up to the 1975Ferrari 312B, after which Ferrari switched to a flat-twelve engine. Maserati's engine was introduced in theCooper T81 and was used until the 1969Cooper T86. The Weslake V12 engine was used from 1966 to 1968 and was introduced in theEagle Mk1 racing car. BRM produced V12 engines from the 1968BRM P133 racing car until the 1977BRM P207. TheMatra Sports V12 engine was introduced in the 1968Matra MS11 racing car and used until the 1978Ligier JS9. Few V12 engines were used in the following decade, with the exception of the Alfa Romeo V12 which was first used by the 1979Brabham BT48 and then by Alfa Romeo until the 1982Alfa Romeo 182.
A resurgence of V12 engines in Formula One began in 1989, with the introduction of theFerrari 640 racing car. Ferrari continued to use V12 engines until the 1995Ferrari 412 T2 became the last Formula One car to use a V12 engine. TheLamborghini LE3512 engine was used by various teams between 1989 and 1993. TheHonda RA122-E engine was first used in the 1991McLaren MP4/6 and was raced until the 1992McLaren MP4/7A. TheYamaha OX99 engine was used in the 1990Brabham BT59 through to the 1992Brabham BT60. The most powerful naturally-aspirated V12 engine used in Formula One was theTipo 043, used byFerrari in1994, which produced 850 hp (630 kW) @ 15,800 rpm.[31]
In prototype sports car racing, the highly successful 2006–2008Audi R10 TDI used adiesel twin-turbo V12 engine. ThePeugeot 908 HDi FAP, introduced in 2007, also used a diesel twin-turbo V12 engine.
.jpg)
Several truck manufacturers have produced V12 diesel engines at various times. For example, the 1967–1982Tatra T813, built in Czechoslovakia, used a 17.6 L (1,074 cu in)naturally aspirated V12 diesel engine, and the 1983–presentTatra T815 is available with a 19.0 L (1,159 cu in) V12 diesel engine in both naturally aspirated and turbocharged forms. In the United States, V12 versions of the 1938–1995Detroit Diesel Series 71, the 1967–1999Detroit Diesel Series 149 and the 1974–1995Detroit Diesel Series 92 were produced. In Japan,Isuzu produced naturally aspirated V12 diesel engines from 14.0 to 22.0 L (854 to 1,343 cu in) in 1976–2000, for their heavy duty trucks: New Power, 810 and Giga.
Trucks using V12 gasoline (petrol) engines are rare, however several were produced in the United States from the 1930s until the 1970s. In 1931,American La France began producing firetrucks with V12 gasoline engines based on theLycoming BB motor. In 1935, the V12 engine used by thePierce Arrow luxury car was fitted to firetrucks built by Seagrave (with production continuing until 1970, since Seagrave purchased the equipment to manufacture the Pierce Arrow engines themselves). The 1960–1965GMC Twin Six 11.5 L (702 cu in) gasoline V12 engine was basically theGMC 351 V6 engine, doubled, with four rocker covers and four exhaust manifolds.[32] Peak power was only 250 hp (186 kW). However peak torque was 793 N⋅m (585 lb⋅ft).
Manydiesel locomotives use V12 engines. Examples include the 2.39 MW (3,200 hp)EMD 12-710 and the 3.28 MW (4,400 hp)GEVO-12 engine (used in theGE ES44AC North American locomotives).
V12 engines used in railway locomotives include:[citation needed]
| Manufacturer | Type | Bore | Stroke | Engine displacement | rpm | KW | kg |
|---|---|---|---|---|---|---|---|
| MTU | R43 | 170 mm (6.7 in) | 195 mm (7.7 in) | 53,113 cc (53.113 L) | 1800 | 2400 | 6000 |
| MTU | 2000 | 130 mm (5.1 in) | 150 mm (5.9 in) | 23,892 cc (23.892 L) | 1800 | 600 | 3000 |
| EMD | 710 | 230.1875 mm (9.1 in) | 279.4 mm (11.0 in) | 139,500 cc (139.5 L) | 950 | 2500 | |
| GE | 7FDL | 228.6 mm (9.0 in) | 266.7 mm (10.5 in) | 131,355 cc (131.355 L) | 1050 | 2400 | |
| Cummins | Qs | 170 mm (6.7 in) | 190 mm (7.5 in) | 51,751 cc (51.751 L) | 1800 | 2200 | |
| MAN | 2842 | 128 mm (5.0 in) | 145 mm (5.7 in) | 22,390 cc (22.39 L) | 2800 | 580 | |
| CAT | 3512 | 170 mm (6.7 in) | 215 mm (8.5 in) | 58,560 cc (58.56 L) | 1800 | 1500 | |
| Perkins | |||||||
| Wartsila | 200 |
The V12 is a common engine configuration for tanks and otherarmoured fighting vehicles. Some examples are:
