 | This article has multiple issues. Please helpimprove it or discuss these issues on thetalk page.(Learn how and when to remove these messages) (Learn how and when to remove this message)
|
| T gauge | |
|---|---|
 | |
| Scale | 1⁄40 in (0.635 mm) to 1 ft (305 mm) 2⁄75 in (0.677 mm) to 1 ft (305 mm) 2 mm to 1 m |
| Scale ratio | 1:450 (Japanese3 ft 6 in (1,067 mm) gauge) 1:480 (Standard gauge) 1:500 (Standard andbroad gauge) |
| Model gauge | 3 mm (0.118 in) |
| Prototype gauge | Commercially available models are of3 ft 6 in (1,067 mm) gauge. |
T gauge (1:450, 1:480 and 1:500) is amodel railway scale with atrack gauge of3 mm (0.118 in), referred to as "three-millimeter gauge" or "third ofN scale." It was introduced at the Tokyo Toy Show in 2006 by KK Eishindo of Japan and went on sale in 2007. It is the smallest commercial model train scale in the world. Since mid-2009, Railway Shop (Hong Kong) has been the exclusive licensed manufacturer.
The models are battery-powered by a throttle (with an optional AC adapter) at a maximum output of 4.5 V DC. To improve power pickup and tractive effort, the powered cars are fitted withmagnetic wheels.
The first train released was the Japanese103 series commuter train in different versions. Each standard train set comes with two powered cars, which are located in the middle of the train. The front and rear cars are equipped with directional headlights. The tinypantographs are made of etched stainless steel. TheHankyu Railway 9000 EMU Series and the Kiha 40 DMU were added to the line of available trainsets in early 2010 and feature improved mechanisms for better performance.
The track is offered as either flexible sections of rail and sleepers at 200, 500 and 750 millimetres (7.87, 19.69 and 29.53 in), or as rigid sections with roadbed, and a small selection of pieces without roadbed. Rigid curved track is available with four different radii: 120 millimetres (4.72 in), 132.5, 145, and 157.5 millimetres (5.22, 5.71, and 6.20 in) in 15° and 30° arc lengths; straight tracks are 30, 60, and 200 millimetres (1.181, 2.362, and 7.874 in) long. Points (switches or turnouts) are available in a single length, right and left-hand, with manual or electric throw.Diamond crossings are made at 30° and 90° angles in a 60mm length. Several miscellaneous track sections are also sold including power, isolating, and level grade crossing. The standard sectional track is "roadbed" style, with integrated ballast, or without roadbed as "fine scale". The rail is approximately 0.040 inches (1.016 mm) high ("Code 40"). Track pieces are connected with gold-plated metal rail joiners plus plastic clips in the roadbed. Different types of dummycatenary masts can be attached to the track.
One side effect of the magnetic wheels of the powered units is that they can climb acute grades as steep as 45 degrees.
http://www.kk-eishindo.co.jp/ The manufacturer and creator of T Gauge
