.png) Superbone | |
| Brass instrument | |
|---|---|
| Classification | |
| Hornbostel–Sachs classification | 423.2 (Sliding and Valvedaerophone sounded by lip movement) |
| Developed | Mid-19th century; late 20th century revival |
| Related instruments | |
| Musicians | |
| |
| Builders | |
Thesuperbone (sometimes known as thedouble trombone) is a hybrid tenortrombone in B♭ that has both a slide like a regular trombone and a set ofvalves like avalve trombone.
Trombones that combine both a slide with a set of valves were built as early as the 1860s byBesson.[1] One of the earliest surviving examples was built byConn in 1884, and closely resembles the modern superbone that appeared in the 1970s.[2] Conn manufactured them through the early 20th century, and a similar instrument with a shorter four-position slide, thevalide, was invented by jazz musician and machinistBrad Gowans in 1946.[3][4]
The term "superbone" was first coined in the 1970s as a name for the instrument patented by Larry Ramirez ofHolton Musical Instruments in collaboration with jazz trumpeter and bandleaderMaynard Ferguson.[5][6] It is very similar to the early Conn hybrid instruments from the 19th century, with a very narrow bore of 0.484 inches (12.3 mm) and threepiston valves.[7] It has a slide lock, which frees the player to operate the valves or the slide with either hand, and was manufactured by Holton as the model TR-395 "Superbone" between 1974 and 2004.[8]
The Holton became a staple instrument for Ferguson, andDon Ellis in his later career. Ferguson used the superbone on the recording "Superbone Meets the Bad Man" from theChameleon album.Ashley Alexander, another proponent of the instrument, recorded "Spring Can Really Hang You up the Most" on hisSecret Love album, which demonstrates the instrument's flexibility.[9] Alexander referred to the instrument as a "double trombone" and wrote a method for it, published byLeblanc in 1980.[8][10]
In the early 2010sJames Morrison in conjunction with Austrian instrument manufacturer Schagerl created his own version of a superbone, employing a larger 0.525-inch (13.3 mm) bore and threerotary valves operated by the left hand.[11] This arrangement allows the player to use the valves and slide independently or simultaneously.[12]Wessex Tubas also manufacture a superbone with the same larger 0.525-inch (13.3 mm) bore, but with three piston valves similar to the Holton.[13]
Superbones, unlike the valide, have a fully functioning trombone slide with the usual seven positions. The Holton and Wessex instruments are assembled from three detachable sections; the slide and bell sections attach to each end of the valve assembly, built with three piston valves arranged in the same manner as on other three-valved brass instruments. The player grips the valve section with the left hand, which supports the weight of the instrument while the right arm is free to operate the slide.[8] The James Morrison Schagerl model has the two sections of a normaltenor trombone (slide and bell), with three rotary valves and their tubing incorporated in the bell section in a similar manner toF attachments.[12]
Early superbones, and the Holton instrument designed for Ferguson (who was primarily a trumpet player), have very narrow almost trumpet-like bore diameters of less than 0.500 inches (12.7 mm). Later models from Schagerl and Wessex use a larger bore of 0.525 inches (13.3 mm) found more commonly on modern tenor trombones.
The Superbone can be played as a slide trombone, a valve trombone, or in combination. Using the slide and valves in combination requires the slide positions to be adjusted, just as when using thetrigger of an F attachment on a tenor orbass trombone. Using the slide with the first and third valves engaged has the same effect as using an F attachment. Conversely, the valves can be used to providetrills andornaments for passages played with the slide.[12]
Media related toSuperbones at Wikimedia Commons