The P320 chambered in 9×19mm Parabellum was introduced in the North American market on 15 January 2014, followed by the .45 ACP compact model at theSHOT Show in January 2015.[8] On 19 January 2017, it was announced that a customized version of the SIG Sauer P320 had won theUnited States Army'sXM17 Modular Handgun System competition. The full-sized model is known as theM17 and the compact carry-sized model is known as theM18.[9]
According toThe Washington Post, the P320 is one of the most popularhandguns in the United States.[10]
The P320 was designed to beambidextrous in handling, sporting a catch lever on both sides of theslide and user-reversible magazine release, and all other operating controls are designed so they can be operated from either side. The firearm can be field stripped with no tools. Additionally, the firearm can be field stripped without depressing the trigger, an additional safety feature to preventnegligent discharge of the weapon.[11] The fire control unit is removable, allowing the switch to a different frame size.[12]
The requirements for the new US Army handgun included the requirement that an existing handgun model would be preferred for the Modular Handgun System Request for Proposal, known as the XM17 Procurement. SIG Sauer submitted a P320 with a number of modifications and submitted them for theXM17 Modular Handgun System competition.
Modifications include:
3.9-inch (99 mm) barrel length in carry size pistol
4.7-inch (120 mm) barrel length in full size pistol
Ambidextrous thumb safety
chambered in 9 × 19 mm Luger (can be adapted to fire larger calibers like .357 SIG, .40 S&W, and .45 ACP)
Improved slide sub-assembly to capture small components when disassembled
Improved trigger "mud flap" to prevent foreign debris from entering the pistol action
Pistols chambered in 9 mm can feature a 17-round magazine as standard with optional 21-round extended magazines available.[13]
Slide cut-out to facilitate the addition of areflex sight. (This is the slide from the RX Series)[14]
On 19 January 2017, it was announced that the SIG Sauer P320 MHS variant had won the United States Military's Modular Handgun System trials. The P320 will be known as theM17 (full size) andM18 (compact) in U.S. Military service. Though the pistol will remain chambered in 9 × 19 mm Luger rather than a larger caliber, the contract allows the services to procure SIG Sauer's proposed XM1152 Full Metal Jacket and XM1153 Special Purpose ammunition.[15][16]
In May 2017, the Army announced that the first unit that will receive the M17 would be the101st Airborne Division by the end of the year. At the same time, the rest of the U.S. Armed Forces revealed they also intend to acquire the handgun, making it the standard sidearm for the entire U.S. military. The services plan to procure up to 421,000 weapons in total; 195,000 for the Army, 130,000 for theAir Force, 61,000 for theNavy (XM18 compact version only), and 35,000 for theMarines.[17][18]
On 17 November 2017, soldiers of the 101st Airborne received the first XM17 and XM18 pistols, with over 2,000 handguns delivered. The XM17 has better accuracy and ergonomics and tighter dispersion than the M9. It will also be fielded more widely, being issued down tosquad andfireteam leaders; while special forces would dual-arm all of its members with a pistol and rifle; previously junior leaders in regular infantry units were excluded from carrying sidearms but policy was changed to give them more choices and options in close quarters battle situations. All Army units are planned to have the M9 replaced with the M17 within a decade.[19][20]
Initial production models of the P320 were found to have a "drop safety" issue if the firearm was dropped at a specific angle, potentially causing it to discharge. SIG Sauer has since refitted the P320 to make it drop-safe and offers a voluntary upgrade program for early P320s.
Issues of drop firing or shooting its user in the leg while holstered[21] have continued sporadically with at least six departments removing the P320 from service.[22][23][24][25] As of April, 2023, an investigation has shown more than 100 people have reported that their own P320 fired without someone pulling the trigger, wounding at least 80 of them, including 33 officers at 18 law enforcement agencies.[25][26][27]
Around 400 P320s were procured for the CanadianJoint Task Force 2 special forces unit (JTF-2) in 2019, but these were withdrawn and the earlierP226 pistols (also manufactured by SIG Sauer) reinstated following a misfire that injured a soldier during a training exercise in November 2020; JTF-2 was the only Canadian military unit using the P320.[28] In June 2021, a technical investigation found that the misfire was due to "a partial depression of the trigger by a foreign object combined with simultaneous movement of the slide [...] that then allowed a round to be fired whilst the pistol was still holstered" and that the usage of a holster designed for a different pistol was a contributory factor; the P320 itself was not at fault nor were there any issues with how it had been procured by Canadian defence officials (since questions had been raised as to whether these officials were aware of the drop safety issues). However, the pistols would remain in storage pending a third-party safety assessment.[29] The safety assessment and other proceedings related to the misfire were concluded by June 2022, with a decision to reinstate the P320 being taken towards the end of that month.[30]
SIG Sauer P320 Full SizeSIG Sauer P320 RX (with Romeo 1 optical reflex sight)
The X Series lineup includes the following grip module sizes:
Cd .357 SIG. The full-size slide also fits the carry-size grip module without any part of the recoil spring showing.
Full size – Fits any SIG P320 full-size slide in 9mm, .40 S&W, and .357 SIG
In January 2019, SIG Sauer announced the XCompact handgun as the newest entry in their X Series lineup.[31]
Compact size – As of March 2020, the P320 XCompact is available in 9mm only.[32]
The XCompact size grip module is the smallest grip module SIG currently carries, as they have not come out with a subcompact X Series grip module to date.
In May 2022, SIG Sauer announced a10mm Auto P320 variant, named the P320 XTEN.
The X-Carry is a larger model of the XCompact featuring 17 rounds per magazine, compared to the Compacts 15 rounds, enlarged grip, longer slide and a smaller slide lock.[33] The X-Carry is the frame used for the M18
Released in late July/early August 2019 the XFIVE Legion is considered the flagship of the P320 platform that brings added weight and features. The TXG grip module hastungsten infused directly into the polymer along with an attachable magazine well. It comes standard with Henning group aluminum base pads and a skeletonized flat trigger. The complete 9mm slide has lightening cuts in the top to reduce weight and assist in recoil. It is also optics ready through the removal of the rear sight plate assembly. The optics cut is the Delta Point/Romeo 1 Pro profile, but will accommodate multiple optics via adapter plates.[34]
The SIG P320-XTENMAX is a 10mm Auto chambered X Series variant of the P320, released in 2022. It features an X Series grip module, bull barrel, flat X Series trigger and a Nitron-finished stainless steel slide with a cut for mounting aiming optics. Magazine capacity is 15 rounds. It weighs 33 oz (936 grams), has a 5-inch (127 mm) bull barrel, overall length of 8.5 inches (216 mm), overall height of 5.6 inches (142 mm), overall width of 1.3 inches (33 mm) and a sight radius of 6.8 inches (173 mm).[35]
The SIG P320MAX is asporterised variant of the P320, designed in 2021 for use by competition shooters. The pistol comes with ROMEO3 MAX sights and tungsten infused TXG heavy grip module, weighs 43.5 oz (1.23 kilograms), has a 5-inch (130 mm)match grade barrel, and an overall length of 8.5 inches (220 mm).[36][37]
In late July 2017, theDallas Police Department in Texas instructed all personnel to stop carrying the P320 pending an investigation.[38] There were concerns that the firearm may discharge when it is dropped and the back of the slide hits the ground at a 33-degree angle. The problem was thought to be related to the trigger weight; some triggers were heavy enough that they essentially continued to move due toinertia after the gun hit the ground. Internet publications, such asTheTruthAboutGuns.com, conducted independent tests that appeared to confirm potential drop firings (at a 40 percent rate).[39][better source needed]
On 8 August 2017, SIG Sauer issued a notice that they would upgrade all P320s to address the issue.[40] The upgrade is described on the company's website as: "an alternate design that reduces the physical weight of the trigger,sear, and striker while additionally adding a mechanical disconnector."[41]
A 2023 investigation byThe Washington Post andThe Trace found more than 100 people who say their P320 discharged with no trigger pressure; at least 80 of them were wounded as a result. At least 35 of the shootings are purported to have occurred with either post-2017 P320s with the updated design intended to address the drop firing problem, or older ones which had been updated by SIG Sauer.[10]
Unlike otherstriker-fired guns, the P320 is "effectively fully cocked at rest", since its striker is under constant spring pressure, which is released when the trigger is pulled. Most such guns, including the P320's military variant, have externalsafeties (like thumb safeties), which the P320's civilian variant lacks. According to gunsmith James Tertin, this is a rare and "uniquely dangerous" configuration.[10] Sean Toner, the P320 designer, has acknowledged in court that "U.S. standards are not very stringent."[42]
SIG Sauer responded by asserting that most accidental discharges involve negligence; that many other gun models suffer from such discharges; that the P320 has been extensively tested and meets safety standards; and that, despite years of complaints and litigation, no one has successfully recreated the claimed phenomenon by demonstrating a P320 firing without its trigger being pulled.[10]
In May 2017,Steyr Mannlicher filed a patent infringement lawsuit against SIG Sauer.[44][better source needed] Steyr refers to their patent US6260301 (filed in 1999 and approved in 2001),[45] which is for a handgun with a removable chassis. Steyr Arms requested a preliminary and permanent injunction against SIG Sauer selling any such firearms. On 25 February 2020, theUnited States District Court for the District of New Hampshire granted SIG Sauer summary judgment, finding that SIG Sauer did not infringe Steyr's patents.[46][47]
On August 4, 2017, four days before the Voluntary Upgrade Program was announced,Stamford Police DepartmentSRT officer Vincent Sheperis filed a negligence action in the United States District Court for the District of Connecticut against SIG Sauer after his holstered P320 allegedly fell from the back of his vehicle and discharged a round into his knee on January 4, 2017.[48][49] Although SIG re-assured the public that the P320 design met industry standards regarding its drop safety, Sheperis's attorney, Jeff Bagnell, stated that the upgrade was telling. "The suit has been validated already", he said, adding that having SIG recall and fix the alleged defect is one of the demands listed in the complaint. SIG settled the case in June 2018.[50]
Communication that the mechanical disconnector added via the P320 voluntary upgrade program "provides an additional level of safety", to be advised via the SIG Sauer website and direct customer communication
Extension of the voluntary upgrade program for 24 months past the settlement date
For anyone who submitted their P320 to the voluntary upgrade program and was charged for repairs, a refund of such charges
For anyone who submitted their P320 to the voluntary upgrade program and was told it was unrepairable, a refund of the purchase price or a new P320
A class action settlement form is available on the SIG Sauer website.[54]
On May 4, 2018,Loudon county deputy sheriff Marcie D. Vadnais filed a negligence action against SIG Sauer in theUnited States District Court for the Eastern District of Virginia after her holstered P320 allegedly discharged and broke her femur in half in February 2018 as she was removing it from her belt. The case settled on May 29, 2019, the second day of a jury trial.[55]
Leo Nielsen Trading ApS and Glock Ges.m.b.H v. Danish Defence Acquisition and Logistics Organization
On March 15, 2019, Glock disputed the adoption of the P320 X-Carry into Danish military service, claiming the P320 did not meetDALO specification No. 79, which stated "No parts of the pistol shall be possible to mount incorrectly or in the wrong places." The case was won by Leo Nielsen Trading ApS andGlock Ges.m.b.H as they proved the ejector could be assembled incorrectly, were paid 30,000Danish krones, and the purchase was cancelled. Later the contract was put out with different requirements, which the P320 fulfilled.[56]
In September 2019, an Arizona gun owner who purchased a P320 in September 2016 initiated a class action lawsuit.[57] It claims that SIG Sauer "continued to sell the flawed gun to the public",[57] and that the upgrade offered "would still not fully compensate him for the significantly diminished resale value of his pistol".[58] In March 2020, judgeJoseph N. Laplante denied SIG Sauer's motion to dismiss the case.[59][58] In May 2020, a trial notice was issued, with pretrial statements due on 5 October 2021; in January 2021, the due date for pretrial statements was revised to 1 February 2022.[60] The motion for class certification was denied in 2022.[61][62]
On January 4, 2022, a police officer, Elvis Ramon Green-Berrios, filed a lawsuit withUnited States District Court for the District of Puerto Rico claiming that his service pistol, a P320, discharged without the trigger being pulled.[63] Specifically, "As soon as he took hold of the holster at his waistband inside his pants, the P320 fired and hit him in his right thigh...".[64] The lawsuit was dismissed in March 2025 after the plaintiff "admitting in court filed documents that his P320 pistol has no defects and does not discharge without a trigger pull."[65] In a press release, SIG Sauer asserted this was the "18th frivolous or unsupported P320 unintentional discharge lawsuit dismissed".[66]
On November 30, 2022, a lawsuit was filed in U.S. federal court alleging several P320 pistols unintentionally fired "without the trigger being pulled or deliberately actuated by the user".[67] The lawsuit claims there have been "over 100 incidents" of such discharges, "many of which have caused severe injury". An attorney representing the lawsuit's plaintiffs, Robert Zimmerman, said it was the largest lawsuit against SIG Sauer involving the P320 on behalf of people who were injured.[68] The 20 plaintiffs in the case (20 individuals and about a dozen spouses) are from 13 different states.
On March 26, 2025, a group of 22 plaintiffs from 16 states filed a negligence and product liability lawsuit against SIG Sauer, asserting "uncommanded firing" of P320 pistols.[69] The lead attorney for the plaintiffs claimed, "Sig knowingly designed and manufactured America’s most dangerously-defective firearm".[70] The lawsuit was filed with theUnited States District Court for the District of New Hampshire.[71]
^ab"Contracts Press Operations Release No: CR-012-17".defense.gov. U.S. Department of Defense. 19 January 2017. Retrieved13 February 2017.Sig Sauer Inc., Newington, New Hampshire, was awarded up to $580,217,000 for a firm-fixed-price contract for the Modular Handgun System including handgun, accessories and ammunition to replace the current M9 handgun. Bids were solicited via the Internet with nine received. Work locations and funding will be determined with each order, with an estimated completion date of Jan. 19, 2027. Army Contracting Command, Picatinny Arsenal, New Jersey, is the contracting activity (W15QKN-17-D-0016).
^"Police Outfit Series: Crime Detective Class" (in Indonesian). Polsek Cilandak Official Account on Instagram. 14 December 2020. Archived from the original on 7 March 2023. Retrieved4 March 2022.{{cite web}}: CS1 maint: bot: original URL status unknown (link)
