 | |
| Company type | Private |
|---|---|
| Industry | |
| Founded | 2015; 10 years ago (2015)[1] |
| Founders | |
| Headquarters | Long Beach,California, US |
Key people |
|
| Products | |
| Services | Orbital launch |
Number of employees | 1,200 (2024)[2] |
| Website | relativityspace |
Relativity Space Inc. is an Americanaerospace manufacturing company headquartered inLong Beach, California.[3] Relativity Space isdeveloping manufacturing technologies,launch vehicles, androcket engines for commercial orbital launch services.[4] As of March 2025, Relativity has announced plans to launch its in-development launch vehicleTerran R for the first time in late 2026.[5]
Relativity Space was founded in 2015 by CEOTim Ellis and CTOJordan Noone on the idea that existingprivate spaceflight companies were not tapping enough into the potential ofadditive manufacturing (3D printing).[6] Relativity was founded with the intent of being the first company to successfully launch a fully 3D-printedlaunch vehicle into orbit.[7]
In November 2020, Relativity Space announced itsUS$500 millionSeries D funding at a calculated US$2.3 billion valuation.[8] In June 2021 Relativity announced anotherUS$650 million funding round led byFidelity Investments at a valuation ofUS$4.2 billion, bringing its total funding to US$1.335 billion.[9] The funding will help the development of a partially reusableheavy-lift launch vehicle, theTerran R, targeting a first orbital launch no earlier than 2026.[10] Relativity Space has investors includingBaillie Gifford,Blackrock, BOND,Coatue, Fidelity, General Catalyst,ICONIQ Capital,K5 Global,Mark Cuban,Playground Global,Social Capital,Tiger Global,Tribe Capital, andY Combinator among others.[11]
In June 2022, it was reported that Relativity Space would sendOneWeb’s second-gen broadband satellites to orbit in 2025 (though Terran R is now projected to launch for the first time no earlier than 2026). This announcement marked a total value of binding launch deals for that rocket to over $1.2 billion despite the company having yet to have launched their first rocket.[12]
The company's initial attempt to launch its first rocket, namedTerran 1, on March 8, 2023 was scrubbed due to technical issues, with a second attempt anticipated for March 11, 2023, which was also scrubbed.[13][14]
On March 23, 2023, Relativity launched its first Terran 1 flight, naming it "Good Luck, Have Fun" and carrying no payload.[15] but it experienced failure during its second stage of flight and failed to reach orbit.[16][17] Following the failed launch, Relativity announced that it was retiring Terran 1 in favor of developing the much larger, reusableTerran R vehicle. The Terran R design transitions some of the parts with less complexity (such as tanks) to more closely resemble manufacturing techniques used by others in the industry, instead of relying on additive manufacturing.[18] The shift to the Terran R was also motivated by market forces in the launch industry. SpaceX's Falcon-9rideshare missions, which launch many small satellites in a single launch, can offer lower pricing than a dedicated launch on smaller rocket. As a result, companies with smaller launch vehicles saw the need to diversify or pivot from their small launch vehicles. The Terran R is a much larger launch vehicle than the Terran 1, making it possible for it to be more cost-competitive with the Falcon 9.Rocket Lab took a similar approach, developing itsNeutron launch vehicle, and additionally expanding its satellite hardware business.[19]
On March 10, 2025, Relativity announced that formerGoogle headEric Schmidt replaced Ellis as CEO of the company, though Ellis remains on the board. Schmidt was reported to have taken acontrolling interest in the company.[20]
Relativity Space announced a new 11,000-square-metre (120,000 sq ft)Long Beach, California headquarters and factory in February 2020.[21] As of February 2020[update], the new headquarters is planned to house both business operations and Relativity'sautonomous development operations that the company plans to build into a modern rocket manufacturing factory in the coming years.[22] According to an interview with CEO Tim Ellis in early 2020, the factory is planned to have no fixedtooling, which is hoped to allow it to be rapidly reconfigured and autonomous.[23] A new 93,000-square-metre (1,000,000 sq ft) factory was announced in June 2021, with Relativity set to takeover the former Boeing C-17 production plant in January 2022 to begin production of its Terran R reusable launch vehicle.[24] In 2024, with the headquarters building completed, the company looked to have permitting approved for a 200 foot tall test stand. The application is in progress.[25]
.jpeg)
In March 2018, Relativity Space signed a 20-year lease at theStennis Space Center in Mississippi, aNASA rocket testing facility, to test engine components and eventually full-scale test their Aeon 1 rocket engines.[3][8] And in June 2019, Relativity Space expanded their work with the Stennis Space Center to include exclusive use of 20,000 m2 (220,000 sq ft) within Building 9101.[26] In mid-2019, Relativity Space planned to create 200 jobs and invest US$59 million in Mississippi over the course of this nine-year lease, which carries an option to extend for another 10 years.[26] In late 2023, the company expanded its presence at the site with an agreement to lease the A-2 test stand in order to perform vertical testing on Terran R.[27]
In January 2019, Relativity Space announced that it won a competitive bidding process with theUnited States Air Force to build and operateLaunch Complex 16 (LC-16) atCape Canaveral Space Force Station in Florida.[28] LC-16 has historical significance having been previously used by theUS military to launchTitan andPershing ballistic missiles.[28] In April 2024, the company shared an update on the site that initial groundwork for the Terran R launch pad was complete with water line installation in progress.[29]
In June 2020, Relativity Space announced it plans to develop a second launch pad atVandenberg Space Force Base in California to launch payloads intopolar orbits andSun-synchronous orbits, including theIridium satellite launches, between 2023 and 2030.[30]
Terran 1 was anexpendable launch vehicle that consisted oftwo stages. The first stage used nine Aeon 1 engines, while the second stage used a single vacuum-optimized Aeon 1 engine. It was designed to launch a maximum payload of 1,250 kg (2,760 lb) to 185 km (115 mi)low Earth orbit (LEO), normal payload of 900 kg (2,000 lb) to 500 km (310 mi)Sun-synchronous orbit (SSO), and high-altitude payload of 700 kg (1,500 lb) to 1,200 km (750 mi) SSO. Relativity's advertised launch price was US$12 million per Terran 1 mission in June 2020.[30] Relativity conducted the first launch of Terran 1 on March 23, 2023 (UTC) after three scrubbed launch attempts.[31]Soon after launch, an anomaly occurred with the upper stage engine which prevented the rocket from achieving orbit. The second stage engine and nosecone splashed into the ocean about 4 minutes into the flight.[17] The Terran 1 rocket was retired after this failed maiden flight.[18]
Terran R is aheavy-lifttwo-stage, partiallyreusable launch vehicle that is currently under development. Compared to the smaller, expendable Terran 1, it is partially constructed using the same 3D printing technologies, but has moved away from additive manufacturing for several components, such as the fuel tanks. Additionally, Relativity has utilized outside suppliers for some components, such as fuel tank domes and fairings.[32] The Terran R is substantially larger than the Terran 1, with a maximum payload capacity of 33,500 kg (73,900 lb) tolow Earth orbit when expended. When re-using the booster stage, the payload is projected to be 23,500 kg (51,800 lb) to a 200 km (120 mi) low-earth orbit and 5,500 kg (12,100 lb) togeostationary transfer orbit. This capacity represents a larger payload mass than Falcon 9, but smaller than Blue Origin'sNew Glenn. The first launch is expected to take place no earlier than 2026.[10] The first stage will use 13 Aeon R gas generator cycle engines that use liquid oxygen and methane propellant. Nine of the engines are capable of gimbaling and four are fixed. The second stage will use an upgraded Aeon Vac engine, which is also a gas generator cycle engine using liquid oxygen and methane.[32]
The Aeon 1 rocket engine is designed to produce 23,000 pounds-force (100,000 N) atsea level and 25,400 pounds-force (113,000 N) in a vacuum. The engine is powered byliquid natural gas (LNG) andliquid oxygen (LOX). It is made out of a proprietary 3D-printedalloy. (GRCop[33] ) It is printed byselective laser sintering and assembled from fewer than 100 parts.[34] By February 2022, Relativity Space had completed 500+ test firings of its Aeon 1 engine,[35] using the E-3 test facility at NASA's Stennis Space Center.[8]
The vacuum-optimized version of Aeon 1, known asAeonVac, powers the second stage of Relativity's rockets.[36][37]
The Aeon R engine, currently under development, is a high pressure gas generator cycle LOX/subcooled Methane propellants engine[38] designed to produce 258,000 lbf (1,150 kN) of thrust at sea level and 279,000 lbf (1,240 kN) in a vacuum. 13 Aeon R engines will power the first stage of Terran R with a combined liftoff thrust of 3,354,000 lbf.[39]
In order to3D print large components such as rocket tanks and airframes, Relativity Space has created a system named Stargate, which it claims is the world's largest 3D printer of metals.[40][41] Stargate uses existing welding technology to melt metal wire, layer by layer, into precise and complex structures that have minimal joints and parts.[42] The company 3D-printed 85% of their Terran 1 launch vehicle as of 2023 and aims to print 95% of the launch vehicle in the future.[43] The company plans to eventually 3D-print a complete launch vehicle within 60 days.[44][8]
As of June 2020[update], Relativity Space has pre-sold more launches than any other company in theprivate space industry sinceSpaceX.[45]
On 5 April 2019, Relativity Space announced its first signed contract, withTelesat, a Canadian telecom satellite operator. The terms of this contract were not specified, but it did include "multiple" launches of Terran 1.[46]
Relativity Space publicly announced their contract withMu Space in April 2019. It is expected that Relativity Space will launch a Mu Space satellite to low Earth orbit in the second half of 2022, aboard Relativity's Terran 1 rocket.[47]
In May 2019, Relativity Space signed a contract withSpaceflight Industries, asatellite rideshare and mission management provider, to launch Spaceflight's dedicatedsmallsat rideshares. The terms of this deal were not disclosed, however, it was shared that the contract included one launch of Relativity's Terran 1 rocket in the third quarter of 2021, with an option for an unspecified number of additional launches.[48]
In September 2019, Relativity Space andMomentus Space announced their launch service agreement at the 2019 World Satellite Business Week inParis. The agreement stated that Relativity's Terran 1 launch vehicles will carry Momentus'Vigoridespace tug service vehicles into orbit. The contract is for one launch, with an option for five additional missions.[49]
In June 2020, Relativity Space announced that they signed a new launch contract withIridium.[45] This contract included up to six dedicated launches to deploy ground spare satellites tolow Earth orbit (LEO) forIridium NEXT's constellation on Relativity's Terran 1 vehicle. According to Suzi McBride, Iridium's COO, the satellite communication provider chose to partner with Relativity Space because of their flexible launch capability and the company's ability to launch one satellite at a time.[50] According to the deal these launches will not begin earlier than 2023.[50]
Lockheed Martin announced on 16 October 2020, that it will launch acryogenic liquid hydrogen management demonstration mission on Terran 1. Lockheed Martin also specified that the launch will make use of Momentus' Vigoride orbital transfer vehicle to house the cryogenic payload.[51] This announcement came two days after NASA announced the recipients of its Tipping Point awards.[52]
OneWeb announced on 30 June 2022 that it signed the first contract for Terran R launches, with a value of over $1.2 billion for more than 20 launches starting in 2025.[53]
Since the cancellation of Terran 1 after its maiden launch and failure, however, it is unknown as to what occurred to many of its contracts.
This article incorporates text from this source, which is in thepublic domain.
