_sail_badge.png){kind=icon} | |
 | |
| Development | |
|---|---|
| Designer | Philip Rhodes |
| Location | United States |
| Year | 1939 |
| No. built | 10,000 |
| Builder(s) | W. D. Schock Corp Jack A. Helms Co. Ron Rawson, Inc. Customflex Skaneateles Boat & Canoe Co. |
| Role | One design-racer |
| Name | Penguin |
| Boat | |
| Crew | one |
| Displacement | 140 lb (64 kg) |
| Draft | 3.83 ft (1.17 m) withcenterboard down |
| Hull | |
| Type | monohull |
| Construction | wood orfiberglass |
| LOA | 11.42 ft (3.48 m) |
| Beam | 4.67 ft (1.42 m) |
| Hull appendages | |
| Keel/board type | centerboard |
| Rudder | transom-mountedrudder |
| Rig | |
| Rig type | cat rig |
| P mainsail luff | 16.00 ft (4.88 m) |
| E mainsail foot | 8.67 ft (2.64 m) |
| Sails | |
| Sailplan | catboat |
| Mainsail area | 69.36 sq ft (6.444 m2) |
| Total sail area | 69.36 sq ft (6.444 m2) |
| Racing | |
| D-PN | 111.5 |
ThePenguin is an Americansailing dinghy that was designed byPhilip Rhodes in 1933 as aone designracer for frostbite racing on the US east coast and first built in 1939.[1][2][3][4][5]
Rhodes drew the original design in 1933 for a competition to define a new boat for the frostbite racing fleets sailed inManhasset Bay and atLarchmont, New York. Rhodes' design lost to a boat byOlin Stephens ofSparkman & Stephens and as a result Rhodes shelved the plans until 1938 when somePotomac River sailors were looking for a new frostbite racing boat. They home-built 12 boats and racing was started on winter weekends.Yachting magazine covered a race series and advertised where plans could be obtained and that led to an expansion in interest in the boat design and it quickly grew to a national class.[5]
The design was originally intended to be built byamateur builders from wood using paper plans, butfiberglass was class-approved for the hull in 1959. Boats have been manufactured byW. D. Schock Corp,Jack A. Helms Co.,Ron Rawson, Inc.,Customflex andSkaneateles Boat & Canoe Co. in the United States. More than 10,000 boats have been built. The boat is no longer in production, but plans are still available for home construction. Plans are publicly provided at no charge by the class association in the form ofPDF downloads.[1][2][6][7][8][9][10][11][12][13][14][15][16][17]
W. D. Schock Corp records indicate that that company built 32 boats between 1964 and 1967.[18]
The Penguin is a recreationalsailboat, built predominantly ofplywood orfiberglass, with wood trim. It has acatboat rig, aplumb stem andtransom, a transom-hungrudder controlled by atiller and a retractablecenterboard. It displaces 140 lb (64 kg).[1][2]
The boat has a draft of 3.83 ft (1.17 m) with the centerboard extended and 4 in (10 cm) with it retracted, allowing operation in shallow water,beaching or ground transportation on atrailer or car roof.[1][2]
The design has aPortsmouth Yardstick D-PN handicap of 111.5.[2][19]
The boat is supported by an active class club that organizes racing events, theInternational Penguin Class Dinghy Association.[20][21]
In a 2010Small Boats Monthly profile Chris Museler wrote, "Like many racing dinghies, the boats are easy to sail but hard to sail well. 'It humbles a lot of folks,' says [Jonathan Bartlett, a Maryland sailmaker], referring to the oversized centerboard and hard chines that the boat can trip over in gusty conditions. 'If you can sail a Penguin well, you can sail anything.' It is a simple boat. 'It's not a Laser. But for the nostalgia and classic look, it's hard to beat it.'"[5]
Museler concluded, "they seem like silly little boats at first, and certainly now are considered obscure. But that seems to be the attraction of many little wooden boats—their uniqueness, and rareness. The best part about the Penguin is that whether you are hiked out with a friend inches away from a competitor or sitting on the floorboards on a lazy summer afternoon, you are surrounded by a little bit of sailing history and a lot of class."[5]
Similar boats
