 | |
| Development | |
|---|---|
| Designer | John Deknatel ofC. Raymond Hunt Associates |
| Location | Canada |
| Year | 1973 |
| Builder(s) | Paceship Yachts andAmerican Machine and Foundry (AMF) |
| Boat | |
| Displacement | 2,460 lb (1,116 kg) |
| Draft | 4.75 ft (1.45 m)centreboard down |
| Hull | |
| Type | Monohull |
| Construction | Fibreglass |
| LOA | 22.58 ft (6.88 m) |
| LWL | 19.75 ft (6.02 m) |
| Beam | 8.00 ft (2.44 m) |
| Engine type | Outboard motor |
| Hull appendages | |
| Keel/board type | fin keel orcentreboard |
| Ballast | 945 lb (429 kg) |
| Rudder | transom-mountedrudder |
| Rig | |
| General | Masthead sloop |
| I foretriangle height | 28.00 ft (8.53 m) |
| J foretriangle base | 9.50 ft (2.90 m) |
| P mainsail luff | 24.00 ft (7.32 m) |
| E mainsail foot | 7.70 ft (2.35 m) |
| Sails | |
| Mainsail area | 92.40 sq ft (8.584 m2) |
| Jib/genoa area | 133.00 sq ft (12.356 m2) |
| Total sail area | 225.40 sq ft (20.940 m2) |
| Racing | |
| Class association | MORC |
| PHRF | 240 |
ThePaceship PY 23 (orPY23) is a Canadiantrailerablesailboat, that was designed byJohn Deknatel ofC. Raymond Hunt Associates and first built in 1973.[1][2][3][4][5]
The boat was built byPaceship Yachts inMahone Bay, Nova Scotia between 1973 and 1981,Canada and later byAmerican Machine and Foundry (AMF) in theUnited States, but it is now out of production.[1]
The Paceship PY 23 is a small recreationalkeelboat, built predominantly of hand-laid upfibreglass withbalsa cores andteak andmahogany wood trim. It has amasthead sloop rig, a transom-hungrudder, acentreboard and or an optional fixed finkeel. It displaces 2,460 lb (1,116 kg) and carries 945 lb (429 kg) of iron and lead ballast.[1][2][6]
The centreboard version has a draft of 4.75 ft (1.45 m) with the 45 lb (20 kg) lead-weighted centreboard and kick-up rudder both extended and 1.75 ft (0.53 m) with the centreboard retracted into the 900 lb (408 kg) stub iron keel, allowing ground transportation on atrailer. The stub iron keel on the centreboard version allows the centreboard to be retracted without using interior cabin accommodation space, as well as beaching without damage to the hull.[1][2][3][6]
The later fixed fin keel version has a draft of 3.75 ft (1.14 m) and is often referred to as the PY 23K or PY 23 FK. This fixed keel version was designed forMidget Ocean Racing Club (MORC) competition.[1][2][3][6]
The design features anodized spars, a self-bailing cockpit designed for six adults and an optional mainsheet traveller. A cockpit dodger was also optional. Below deck accommodations include four cabin windows, 5 ft (150 cm) headroom, a "V" berth in the bow, storage shelving and bins, a folding dining table, an optional gallery with an icebox, a stainless steel sink and a 12 U.S. gallons (45 L; 10.0 imp gal) fresh water tank.[6]
The PY 23 was designed so that even if a knock-down occurs that puts the mast in the water, the boat's interior will not take on water and the boat remains self-righting.[6]
The boat is normally fitted with a small 3 to 6 hp (2 to 4 kW)outboard motor for docking and maneuvering.[1][5]
The design has aPHRF racing average handicap of 240 and ahull speed of 5.96 kn (11.04 km/h).[2][5]
The boat was at one time supported by an active class club,The Paceship, but the club is currently inactive.[7][8]
In a review Michael McGoldrick wrote, "Unlike the interior of many boats built in the 1970s which have a dinette arrangement, the PY23's layout features two settees which are parallel to the centerline, and a table which folds up against a bulkhead. This layout often provides for more open space in the main cabin. It's also in this size range that boats get big enough to have a semi-private head located behind a bulkhead."[9]
In a 2010 review Steve Henkel wrote, "it is interesting to compare this vessel with the slightly smaller O'Day 22 ... designed by the same firm, Raymond Hunt Associates, at around the same time. The PY23, like her little sister, has a reverse transom, which adds a foot to the hull length, justifying the '23' designation, at least in the minds of her marketers. Both boats were offered with either keel or shoal-draft keel-centerboard configuration. The layouts below are also similar, except for the galley location; the bigger boat puts the galley under the main hatch, where the cook, if he wants, can stand up straight to make dinner. Best features: The coamings are unusually high forward, giving good back support to the PY23's crew. The helmsperson, however has to suffer with a coaming no higher than the O’Day 22's. Down below, a sliding door affords privacy in the head compartment, and the head is well positioned under the forward hatch to give good ventilation and good headroom and knee room. Worst features: While the PY23's cabin space is certainly greater than the Kirby Blazer ... it's a great deal less than the Precision 23's (which is almost a foot longer and half a foot wider)."[5]
We're working on reactivating the webpages of Paceship.ORG and the related domains. The creator, Jay Moran, passed and through the kindness of his daughter, the site has been saved.
Media related toPaceship PY23 at Wikimedia Commons