This article has multiple issues. Please helpimprove it or discuss these issues on thetalk page.(Learn how and when to remove these messages) This article'slead sectionmay be too short to adequatelysummarize the key points. Please consider expanding the lead toprovide an accessible overview of all important aspects of the article.(May 2021) This articleneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Offenhauser" – news ·newspapers ·books ·scholar ·JSTOR(September 2008) (Learn how and when to remove this message) (Learn how and when to remove this message)

Offy
Offenhauser Racing Engines

Logo
Industry	Automotive
Founded	1933
Founder	Fred H. Offenhauser
Products	Racingengines

TheOffenhauser Racing Engine, orOffy, is aracingengine design that dominated Americanopen wheel racing for more than 50 years and is still popular among vintagesprint andmidget car racers.^[1][2][3]

The Offenhauser engine, familiarly known as the "Offy", was anoverhead cammonoblock4-strokeinternal combustion engine developed byFred Offenhauser andHarry Arminius Miller.^[4] Originally, it was sold as amarine engine. In 1930 a four-cylinder 151 cu in (2.47 L) Miller engine installed in a race car set a new internationalland speed record of 144.895 mph (233.186 km/h). Miller developed this engine into a twin overhead cam, four-cylinder, four-valve-per-cylinder 220 cu in (3.6 L) racing engine. Variations of this design were used inmidgets andsprints into the 1960s,^[5] with a choice ofcarburetion orHilbornfuel injection.^[6] When both Miller and the company to whom he had sold much of the equipment and rights went bankrupt in 1933, Offenhauser opened a shop a block away and bought rights to engines, special tooling and drawings at the bankruptcy auction, and he and other former Miller employees took over production. They and former Miller employee, draftsmanLeo Goossen, further developed the Miller engines into the Offenhauser engines.

In 1946, the name Offenhauser and engine designs were sold toLouis Meyer and Dale Drake. It was under Meyer and Drake that the engine dominated the Indianapolis 500 and midget racing in the United States.^[7] In 1965, Meyer was bought out by Drake, his wife Eve and their son John. From then until Drake's son John sold the shop to Stewart Van Dyne, the Drake family designed and refined the engine until its final race days.

One of the keys to the Offenhauser engine's success and popularity was its power. A 251.92 cubic inch (4,128.29 cm³)DOHC naturally-aspirated four-cylinder racing Offy with a 15:1compression ratio and a 4.28125-by-4.375-inch (108.744 mm × 111.125 mm)bore andstroke could produce 420 hp (310 kW) at 6,600 rpm (1.77 hp per cubic inch, 81 kW/L) making it remarkably power-dense. Other variants of the engine produced even higher outputs of 3 hp per cubic inch (137 kW/L), unparalleled for their size and capacity in power-to cubic-inch/cylinder-count ratio. Another reason for the engine's success was its reliability. Itsmonobloc construction made it immune tohead gasket or cylinder stud problems, and allowed for highercylinder pressures.^[8][9]

From 1934 through the 1970s, the Offenhauser engine dominated Americanopen-wheel racing, winning theIndianapolis 500 27 times. From 1950 through 1960, Offenhauser-powered cars won the Indianapolis 500 and achieved all three podium positions, winning thepole position in 10 of the 11 years.

The Offenhauser shop began to do machine work forLockheed in 1940, as the arms build-up for anticipated war began. The last prewar engine was shipped on July 17, 1941, and the plant began producing hydraulic systems after thePearl Harbor attack. Leo Goossen finally became a full-time Offenhauser employee in 1944, and Fred Offenhauser sold the company in 1946.^[7]

In 1959Lime Rock Park held a famousFormula Libre race, whereRodger Ward shocked the expensive and exoticsports car contingent by beating them on theroad course in an Offenhauser poweredmidget car, which was normally considered competitive onoval tracks only. On the strength of this performance, the car was entered in the Formula 1 1959 US Grand Prix at Sebring, where it was totally uncompetitive, setting a qualifying time of 3:43.8 compared to the pole time of 3 minutes dead and being the slowest Formula 1 starter at 3:33.4.

When Ford came onto the scene in 1963,with much increased competition and sanctioning body rule changes,^{[failed verification]} the Offy began to lose its domination over Indy car racing, although it remained a competitive winner on the circuit including at the 500 through the mid-1970s even with the advent ofturbocharging. A more powerfulturbocharged version of the engine was used by Offenhauser in1968, and gaveBobby Unser the win that year. The engine made 750 hp (560 kW) @ 9,500 rpm, from adisplacement of only 168 cu in (2,750 cc).^[10] Outputs over 1,000 bhp (750 kW) could be attained, using around 44.3 psi (3.05 bar) of boost pressure. The final 2.65-litre four-cylinder Offy, restricted to 24.6 psi (1.70 bar) boost, produced 770 bhp (570 kW) at 9,000 rpm. The Offy's final victory came at Trenton in 1978, inGordon Johncock's Wildcat. The last time an Offy-powered car raced was atPocono in 1982 for theDomino's Pizza Pocono 500, in anEagle chassis driven byJim McElreath, although two Vollstedt chassis with Offenhauser engines failed to qualify for the 1983 Indianapolis 500.

Offenhauser produced engine blocks in several sizes. These blocks could be bored out or sleeved to vary the cylinder bore, and could be used with crankshafts of various strokes, resulting in a wide variety of engine displacements. Offenhauser (and Meyer-Drake, in later years) frequently made blocks, pistons, rods, and crankshafts to specific customer requests. However, certain engine sizes were common, and could be considered the "standard" Offenhauser engines:^[7]

• 97 cu in (1.59 L) - to meet the displacement rule in many midget series
• 220 cu in (3.6 L) - displacement rule inAAA (later USAC) sprint cars
• 270 cu in (4.4 L) - displacement rule for the Indianapolis 500 under AAA rules^[11]
• 255 cu in (4.18 L) - for Indianapolis (during the 1930s fuel consumption rules)
• 252 cu in (4.13 L) - displacement rule for Indianapolis under USAC rules
• 168 cu in (2.75 L) - displacement rule for turbocharged engines at Indianapolis (to 1968)
• 159 cu in (2.61 L) - displacement rule for turbocharged engines at Indianapolis (1969 and later)

From 1950 to 1960, the Indianapolis 500 was a round of theWorld Drivers' Championship.

SeeIndianapolis Motor Speedway race results for a more complete list.

In the 11 World Championship years, the Meyer-Drake Offenhauser engine partnered for at least one race with the following 35constructors:

(excluding the 1950-1960 Indianapolis 500) (key)

• Formula One engine manufacturers
• Indianapolis 500
• Engine manufacturers of the United States

• Articles with short description
• Short description matches Wikidata
• Wikipedia introduction cleanup from May 2021
• All pages needing cleanup
• Articles covered by WikiProject Wikify from May 2021
• All articles covered by WikiProject Wikify
• Articles needing additional references from September 2008
• All articles needing additional references
• Articles with multiple maintenance issues
• All articles with failed verification
• Articles with failed verification from September 2019