| Development | |
|---|---|
| Designer | Gary Mull |
| Location | United States |
| Year | 1980 |
| Builder(s) | Jeanneau,C.N. Loire,Construction Navale Franck Roy, et al |
| Role | Micro Class racing sailboat |
| Name | Microsail |
| Boat | |
| Crew | two |
| Displacement | 1,323 lb (600 kg) |
| Draft | 3.61 ft (1.10 m) maximum |
| Hull | |
| Construction | Fiberglass |
| LOA | 18.04 ft (5.50 m) |
| LWL | 16.40 ft (5.00 m) |
| Beam | 8.04 ft (2.45 m) |
| Hull appendages | |
| General | transom-mountedrudder |
| Keel/board type | lifting fin keel |
| Ballast | 507 lb (230 kg) |
| Rig | |
| General | Fractional riggedsloop |
TheMicrosail is atrailerablesailboat, that was designed byAmericanGary Mull as aMicro Class racer and first built in 1980.[1][2][3][4][5]
The boat was originally built byJeanneau inFrance for FrenchMicro Cup racing. It was later built by a number of companies, includingC.N. Loire up until 2000. After 2000 it was only available as a kit for amateur construction untilConstruction Navale Franck Roy commenced building the design again in 2007.[1][5]
The Microsail is a small racingkeelboat, built predominantly offiberglass. It has afractionalsloop rig, an transom-hungrudder and a lifting finkeel. It displaces 1,323 lb (600 kg) and carries 507 lb (230 kg) of ballast.[1][2][5]
The boat has a draft of 3.61 ft (1.10 m) with the lifting keel down and 0.66 ft (0.20 m) with the keel retracted.[1][5]
The boat has ahull speed of 5.43 kn (10.06 km/h).[2][5]
