| M110A1 Compact Semi-Automatic Sniper System | |
|---|---|
.jpg) The M110A1 Squad Designated Marksman Rifle | |
| Type | Sniper rifle |
| Service history | |
| In service | 2016–present |
| Production history | |
| Designed | 2016 |
| Manufacturer | Heckler & Koch |
| Variants | M110A1 CSASS M110A1 SDMR |
| Specifications | |
| Mass | |
| Length |
|
| Barrel length | 414 mm (16.30 in)[2] |
| Cartridge | 7.62×51mm NATO |
| Action | Gas-operated,rotating bolt |
| Rate of fire | Semi-automatic |
| Muzzle velocity | 750 m/s (2,461 ft/s) with 175 gr. M118LR[citation needed] |
| Effective firing range | 800 metres (875 yd) (point targets) |
| Feed system | 10 or 20-round detachable box magazine |
M110A1 may refer to theM110A1 CSASS (Compact Semi Automatic Sniper System) or theM110A1 SDMR (SquadDesignated Marksman Rifle). It is an Americansemi-automaticsniper rifle that is chambered for the7.62×51mm NATO round. It is manufactured byHeckler & Koch (H&K) and developed from the company'sHK417, and similar to theBundeswehr G28 configuration. Despite a designation similar to theM110 Semi-Automatic Sniper System (M110 SASS), the M110A1 is an unrelated design as the former was a development of theKnight's Armament Company SR-25. The M110A1 CSASS was expected to supplant and eventually replace the M110 in U.S. military service but this does not appear to have occurred as of 2022. However, several thousand M110A1 SDMRs have been fielded with theUS Army andAir Force to replace various weapon systems currently being used.
In July 2012, the U.S. Army requested sources to remanufacture the current M110 rifle into the Compact Semi-Automatic Sniper System (CSASS). The CSASS would be a shorter and lighter version of the M110 with a collapsible stock and removable flash suppressor, giving it an overall length of 36 inches (910 mm) and a weight of 9 pounds (4.1 kg) unloaded. The Army wanted the capability to convert 125 rifles per month, with the ability to increase to 325 per month.[3] The Army formally requested proposals for the CSASS in June 2014.[4]
On 1 April 2016, the Army announced it had awardedHeckler and Koch a contract with a maximum value of $44.5 million to replace the KAC M110. The weapon selected was not initially specified, but was likely theH&K G28; H&K was to produce 3,643 rifles.[5] A goal of the effort was to give snipers a weapon that didn't "stick out" as a sniper rifle; with a suppressor, the M110 is 46.5 in (1,180 mm), 13 in (330 mm) longer than theM4 carbine and 7 in (180 mm) longer than theM16A4 rifle. A minimum of 30 CSASS units will be used for production qualification testing and operational testing over 24 months.[6] H&K later confirmed that a modified G28 had indeed been selected as the CSASS rifle. The G28 is nearly 6 cm (2.5 in) shorter and 1.3 kg (3 lb) lighter than the M110 (unloaded and without a suppressor) and will cost about $12,000 per rifle.[7] Interestingly, the new CSASS was to be designated the M110A1 CSASS, continuing to use the earlier KAC M110's designation number. This was likely to avoid needing to start a newProgram of Record.[8] In May 2018, theU.S. Marine Corps planned to begin receiving the CSASS to replace their M110 rifles.[9]
However, as of September 2017, no CSASS rifles had been fielded because no funding had been allotted for their procurement. Shortly after, an ECP (engineering change proposal) was announced which was speculated to be a sign of conversion of the CSASS to a squad designated marksman rifle configuration.[10] Since 2017, there have been several small tests of the CSASS with soldiers, includingjump testing, but no known fielding of the rifle.[11][12][13]
The SDMR configuration was planned to give extended range capabilities to infantry squads so they could engage threats at distances of 300-600m.[14] The Army conducted some Limited User Evaluation of the M110A1 SDMR in early 2018 and announced that the SDMR would soon be fielded as the standard DMR starting in September 2018 and would replace theMk 14 EBR currently in service.[14][15][16][17] The optic to be used with the SDMR was revealed shortly afterward as theSIG Sauer Tango6 1-6×24mm.[18] For a time, the SDMR version was given the designationM110E1 while it was being evaluated by PEO Soldier.[2] The SDMR was given its official designation as M110A1 Squad Designated Marksman Rifle which, confusingly, uses the same type designation as the M110A1 CSASS.[19] This was reinforced by release of its official TM (technical manual) in May 2022 which also identified the rifle as the M110A1 SDMR.[20]
Fielding of the nearly 6,000 M110A1 SDMRs to various Army units, including theNational Guard, effectively began in 2020 and continued into 2022; fielding is expected to be complete by 2023.[21][22][23][24] To support this, in spring 2020 H&K was granted an increase of $33.5 million to their contract's original $44.5 million maximum.[25][26] In April 2022, theAir Force also announced it would soon complete fielding of the 1,464 M110A1 SDMRs it had procured. These SDMRs would be distributed toPJs,EOD techs, andSecurity Forces. They would replace the Security Forces' existingM24 SWS and the M110 SASS used by PJs and EOD.[27]
The status of the M110A1 CSASS, as of 2022, is uncertain. A little more than $57 million of the contract's combined $78 million has been spent and there is no further spending indicated for FY2022 onward.[28][29] The Army, instead, revised a $13 million contract withKnight's Armament Company to allow for procurement of theM110A2 as well as the standard M110 SASS. The M110A2 is an improved version of the M110 which features an improved gas system, new suppressor, adjustable stock, andM-LOK rails.[30] Meanwhile, theNavy andMarine Corps, which had expressed interest in the CSASS,[10] decided to instead pursue an M110 SASS PIP (Product Improvement Program) for FY2021 based on market research which indicated improved range and lethality with the PIP compared to the M110A1 CSASS without any increase in cost.[31] Budget figures for FY2023 show funding set aside for the M110 SASS PIP to upgrade the Marine Corps' existing M110s.[32]
The M110A1 CSASS and SDMR are variants of theHK417; the HK417 is a gas piston variant of theAR-10 platform, with theshort-stroke gas piston derived from theH&K G36. Compared to the G28, the M110A1 uses an aluminum upper receiver instead of steel to meet weight requirements, weighing 8.4 lb (3.8 kg) unloaded and reaching some 15 lb (6.8 kg) loaded and with accessories.[1]
It is capable of using the7.62mm M80A1 as well as the newer M1158 advanced armor piercing rounds which can penetrate modern body armor the5.56mm M855A1 cannot.[14][15] The M110A1 features a GeisseleM-LOK rail handguard, Geissele adjustable two-stage trigger, Geissele optic mount, OSS SRM6 suppressor, and 6-9 Harris bipod and mount.[1][8]
The M110A1 SDMR is differentiated from the CSASS by the selected optic and the buttstock type. The SDMR variant is fitted with aSIG Sauer TANGO6 1–6x24low-power variable optic, while the CSASS variant is fitted with aSchmidt & Bender 3–20×50 PM II Ultra Shorttelescopic sight.[1][8]
