 | |
| Names | |
|---|---|
| Preferred IUPAC name Lithium aluminate | |
| Systematic IUPAC name Lithium(1+) aluminate | |
| Other names Lithium metaaluminate Lithium aluminum oxide | |
| Identifiers | |
3D model (JSmol) | |
| ChemSpider |
|
| ECHA InfoCard | 100.031.291 |
| EC Number |
|
| MeSH | Lithium+aluminate |
| |
| |
| Properties | |
| AlLiO2 | |
| Molar mass | 65.92 g·mol−1 |
| Appearance | white crystalline powder |
| Density | 2.615 g/cm3, solid |
| Melting point | 1,625[1] °C (2,957 °F; 1,898 K) |
| insoluble | |
| Thermochemistry | |
Std molar entropy(S⦵298) | 53.35 J/mol·K[2] |
Std enthalpy of formation(ΔfH⦵298) | −1188.670 kJ/mol[2] |
Gibbs free energy(ΔfG⦵) | −1126.276 kJ/mol[2] |
| Hazards | |
| Safety data sheet (SDS) | External MSDS |
Except where otherwise noted, data are given for materials in theirstandard state (at 25 °C [77 °F], 100 kPa). | |
Lithium aluminate (LiAlO
2), also calledlithium aluminium oxide, is an inorganicchemical compound, analuminate oflithium. Inmicroelectronics, lithium aluminate is considered as alattice matching substrate forgallium nitride.[3][4] Innuclear technology, lithium aluminate is of interest as a solidtritium breeder material, for preparing tritium fuel fornuclear fusion.[5] Lithium aluminate is alayered double hydroxide (LDH) with a crystal structure resembling that ofhydrotalcite.[dubious –discuss][clarification needed] Lithium aluminate solubility at high pH (12.5 – 13.5) is much lower than that ofaluminium oxides. In the conditioning of low- and intermediate level radioactive waste (LILW),lithium nitrate is sometimes used as additive tocement to minimise aluminiumcorrosion at high pH and subsequenthydrogen production.[6] Indeed, upon addition of lithium nitrate to cement, a passive layer ofLiH(AlO
2)
2 · 5H
2O is formed onto the surface of metallic aluminium waste immobilised inmortar. The lithium aluminate layer is insoluble in cement pore water and protects the underlying aluminium oxide covering the metallicaluminium from dissolution at highpH. It is also a pore filler.[7] This hinders the aluminium oxidation by the protons of water and reduces the hydrogen evolution rate by a factor of 10.[8]
Lithium aluminate also finds its use as an inertelectrolyte support material in moltencarbonatefuel cells, where the electrolyte may be a mixture oflithium carbonate,potassium carbonate, andsodium carbonate.[9]
In 1906 Weyberg described his newly synthesized compound, lithium hydrogen aluminate. This was the first known synthesis of this unique compound. He asserted that this new compound had the corresponding chemical formula:[10]
In 1915 Allen and Rogers asserted that an insoluble aluminate of lithium is formed when aluminum is dissolved in a solution of lithium hydroxide. This air-dried substance had an atomic ratio of 2Li:5Al and the chemical formula:[11]
In 1929 Prociv recreated Allen and Rogers experiment and through a series of conductometric measurements on the saturated solution of the substance concluded that lithium and aluminum were present in the ratio of 0.8Li:2Al, which, he says, is an atomic ratio of approximately 1Li:2Al. According to him lithium aluminate may also be precipitated by the addition of a solution of lithium hydroxide to a solution of aluminum salt or by adding a solution of lithium salt to a solution of an alkali aluminate. Thus there was disagreement between Allen/Rogers and Prociv as to the composition of lithium aluminate. This may have been attributed to variations between their precipitation conditions.[11]
In 1932 Dobbins and Sanders described the formation of lithium aluminate by the addition of dilute ammonia to a solution containing lithium and aluminum salt, in the presence of phelphtalein as an indicator. In their preparation of acid lithium aluminate they dissolved strips of amalgamated aluminum in normal and tenth normal solutions of lithium hydroxide. The lithium aluminate was precipitated by the addition of a solution of lithium hydroxide to a solution of aluminum salts, or by adding a solution of lithium salt to a solution of alkaline aluminate. In all cases the composition of the compound of lithium aluminate was expressed by the formula:[12]
They claimed that the formed compound contained lithium and aluminum in the atomic ratio of 2Li:5Al. Their chemical formula was simplified into the modern formulation for lithium aluminate:
The fundamental compound of lithium aluminate has found attention in two different fields: nuclear physics and solid-state chemistry. At least five different phases of lithium aluminate have been found.[13] The lithium aluminate crystal structure may be found in either α, β, or γ phases.[14]
Nuclear physicists are interested in theγ-LiAlO
2 modification of lithium aluminate, because of its good performance under high neutron and electron radiation. This modification also exhibits the essential chemical, thermo physical and mechanical stability at high temperature along with the required irradiation behavior. This phase appears to be a promising lithium ceramic, suitable as an in site tritium breeding material in future fusion reactors.[13]
Solid-state chemists investigating preparational routes to lithium aluminate discovered its interesting acid-base chemistry. Theα-LiAlO
2 modification (but neitherβ-LiAlO
2 orγ-LiAlO
2) reacts with molten benzoic acid leading to nearly totalLi+
proton exchange thus formingLiHAl
2O
4 There is a lot of interest in the chemical reactivity among the three modifications ofLiAlO
2. The reasons for theα-LiAlO
2 modification being highly reactive and theβ-LiAlO
2 orγ-LiAlO
2 modifications being totally unreactive is currently a mystery.[13]
Lithium aluminate powder preparation was based on the solid-state reactions betweenAl
2O
3 and lithium-containing compounds likeLi
2CO
3, LiOH,Li
2O, LiAc, and reactions occurred at temperatures between 400Deg C to 1000 Deg C. Due to the evaporation of lithium at high temperatures and contamination from grinding operations, pure lithium aluminate with controlled particle size has been difficult to synthesize.[15]
Synthesis of lithium aluminate has been essentially performed by several methods: in the solid state, by wet chemical, sol-gel, with the use of templates, various precursors, and combustion processes. The main product in a solid state reaction is theα-LiAlO
2 phase; in a wet chemical reaction, the main product is a solid solution ofα-LiAlO
2 andγ-LiAlO
2 phases.[14] The α-LiAlO2 modification (low temperature phase), with a hexagonal structure, undergoes transformation to the γ-modification (High temperature phase), with a tetragonal structure, at about 900 °C. The metastable β-modification, with a monoclinic structure, is assumed to transform to the γ-modification at about 900 °C.[15]
The compound is unknown in the natural environment. However, a related compound, LiAl5O8, is known as the very recently discovered (as of 2020) and very rare mineral chukochenite.[16][17]
