• Personal System/2 Model 70 386
• Personal System/2 Model 70 486

A PS/2 Model 70 386, with one floppy drive and one hard drive
Developer	International Business Machines Corporation (IBM)
Manufacturer	IBM
Product family	Personal System/2
Type	Personal computer
Release date	June 2, 1988; 37 years ago (1988-06-02) (Model 70 386) December 19, 1989 (1989-12-19) (Model 70 486)
Lifespan	1988–1992
Discontinued	December 1992 (1992-12)
Media	1.44 MB 3.5-in floppy disks
CPU	Intel 386 at 16–25 MHz (Model 70 386) Intel 486 at 25 MHz (Model 70 486)
Storage	60–160 MB hard drive
Graphics	Video Graphics Array
Power	120/240 VAC ～
Successor	PS/2 Model 76 PS/2 Model 77
Related	List of IBM PS/2 models

ThePersonal System/2 Model 70 386 andPersonal System/2 Model 70 486 are midrange desktop computers inIBM'sPersonal System/2 (PS/2) family of personal computers. The PS/2 Model 70 386, released in June 1988, features anIntel 386 microprocessor clocked between 16 MHz and 25 MHz (depending on the submodel) and features the 32-bitMicro Channel architecture (MCA) bus; the Model 70 486, released in December 1989, features theIntel 486 clocked at 25 MHz and also includes the 32-bit MCA bus. The latter is essentially a Model 70 386 with the486/25 Power Platform pre-installed; this was aCPU upgrade card for the Model 70 386 released earlier in October 1989 that was the first commercially available product to use the 486 processor. Both editions of Model 70 are housed in the same case as the earlierPS/2 Model 50 from 1987.

The PS/2 Model 70 was succeeded in 1992 by the similarly sizedPersonal System/2 Model 76 and the largerPersonal System/2 Model 77. Like the Model 70 before them, both are desktop models featuring 32-bit Micro Channel expansion slots.

Both variants of the Model 70, along with the rest of the PS/2 line, were developed at IBM's facility inBoca Raton, Florida. The original Model 70 386 was released on June 2, 1988.^[1][2] The chief engineer behind the Model 70 386 was Mark Dean, who previously headed development of thePS/2 Model 80, thePC AT and theISA bus.^[3] The original Personal System/2 Model 70 386 was in development atIBM since 1986, along with the rest of the initial line-up of thePS/2.^[4] The existence ofprototypes of the Model 70 386 were known to select members of the press and industry insiders since April 1987, but it took until May 1988 for IBM to formally announce it.^[5] In the interim, IBM released the PS/2 Model 80—the company's first Intel-based PC with the 32-bit386 microprocessor. With itstower construction allowing for a greater number ofMicro Channelexpansion slots anddrive bays IBM initially positioned the PS/2 Model 80 as a multiuserworkstation. However, the company pivoted the machine toward server use the next year, with the Model 70 386 slotting into the role of a 32-bit workstation.^[6]

Both the Model 70 386 and the Model 70 486 feature the same case and tool-less construction as theModel 50 released earlier in April 1987.^[7][8] The Model 70 386 was initially manufactured at IBM's facility inBoca Raton, Florida, along with the Model 50, theModel 30, theModel 60, and the Model 80.^[1][9] In early 1989, IBM moved manufacturing of PS/2s from Boca Raton toRaleigh, North Carolina, after having shut down their production lines reserved for computer systems in Florida to make way for other products.^[9]: 1 The hard drives used in the Model 70s were manufactured atIBM Japan'splant in Fujisawa, Kanagawa.^[10]

The Model 70 386 was plagued with several design defects from the time of its release. The Model 70 386-A21 in particular was problematic, with initial production runs possessing a defective processor complex slot that prevented the systems from functioning. These issues and more prompted suspension of production as well as numerous motherboard redesigns lasting two months in early 1989.^[11]: 1 In June 1989, IBM issued a recall of certain submodels of the Model 70 386 possessing 120-MB hard drives, after users reported drive failures and a "10483" error code shortly after purchase. These failures were traced back to a manufacturing error at IBM Fujisawa; the fault was discovered to be oil lubricant breaching containment and leaking outside of the drives.^[10] While this leak was easily fixed and did not result in any data loss, it resulted in the recall of 25,000 units of the Model 70 386 that month.^{[10][12]: 1}

In June 1989, IBM announced the 486/25 Power Platform.^[13] This was an upgrade package for the Model 70 386-A21 (see§ Specifications for more details on the submodel) comprising a 25-MHzIntel 486 microprocessor on aCPU daughtercard (called acomplex, in IBM parlance). This card plugs into a dedicated slot on themotherboard (aplanar, in IBM parlance), replacing the 25-MHz 386 processor complex that the Model 70 386-A21 originally shipped with.^[13][14] This allows the Model 70 386 to run twice as fast as 386 machines clocked at 33 MHz, on top of giving the Model 70 386 the built-infloating point unit inherent to the i486. The 486/25 Power Platform was the first commercially available product to use the 486 processor, announced just two months afterIntel publicly released the 486 processor and first shipping in early October 1989.^{[13]: 1 [15]: 39} Less than a month later, however, a calculation bug was discovered in early batches of the 486 processor.^[16] While the bug was relatively minor and rarely encountered in real-world applications, IBM halted further shipments of the 486/25 Power Platform until December 1989, after Intel had corrected the bug in further batches of 486 processors.^[17][18] In the interim,Apricot Computers released theVX FT, the world's first pre-built 486 computer, in early December 1989.^[19][20][a] Like the Model 70 386, the VX FT featured the Micro Channel architecture.^[21]

On December 19, 1989, IBM introduced the PS/2 Model 70 486, their first prebuilt computer system with the 486 processor.^[18] In essence, the Model 70 486 is identical to the Model 70 386, only with the 486/25 Power Platform preinstalled and with a different badge on the front of the case.^[8] Select units of the Model 70 486 were shipped to enterprises in the third week of December 1989, while volume shipment was slated for mid-January 1990.^[22]

All submodels of Model 70 have three Micro Channel expansion slots: two 32-bit slots and one 16-bit slot.^[5] The 16-bit slot features an extension for specific MCAgraphics adapters such as the8514/A.^[23]: 139

The initial two entries in the Model 70 386 line were released in June 1988 and comprise the Model 70 386-E61, with a 386 processor clocked at 16 MHz, and the Model 70-121, with the same processor clocked at 20 MHz. The Model 70 386-E61 features 1 MB ofRAM stock and a 60-MBESDI hard disk drive. The Model 70-121 doubles the capacity of both the stock amount of RAM and the hard drive capacity. Both units may have their RAM expanded up to 16 MB total; they additionally sport a socket for a387floating point unit.^[6] The top-of-the-line Model 70 386-A21 was released later, in December 1988 (delayed a month due toFCC Class B emissions testing).^[24][25] IBM designed this submodel with a significantly differentmotherboard, with the 25-MHz Intel 386 processor residing on a daughtercard that plugs into a dedicated slot on the motherboard. This opposed to having the 386 processor plug into aQFP, as is the case with the initial two entries in the Model 70 386 line. Besides housing the 386 processor, the daughtercard also has a socket for 387 math coprocessor and 64 KB worth of 30-nsSRAM acting as cache, driven by an Intel 82385 cache controller. The Model 70-A21 featured the same 120-MB ESDI hard drive as the Model 70-121.^[26]: 112

In September 1989,^[27] IBM introduced two new models of the Model 70 386. The first was the Model 70-061, a 20-MHz 386 unit with a 60-MB hard drive intended as a low-cost version of the Model 70-121; and the second was the Model 70-A61, a cost-reduced version of the Model 70 386-A21 (featuring the same 25-MHz 386 on a complex) with the same 60-MB hard drive.^[28] After a two-year gap with no new introductions, IBM announced the final four models in the Model 70 386 range in December 1991. These included the Model 70 386-A81, a 25-MHz unit with an 80-MB hard drive; the Model 70 386-A16, another 25-MHz unit with a 160-MB hard drive; the Model 70 386–081, a 20-MHz unit with an 80-MB hard drive; and the Model 70 386–161, another 20-MHz unit with a 160 MB hard drive. All four models came with 4 MB of RAM stock.^[29] The PS/2 Model 70 386 was officially withdrawn by IBM in October 1992.^[30]

The Model 70 486 was introduced in December 1989 in two variants: the Model 70 486-B21, with a 120-MB ESDI hard drive, and the Model 70 486-B61, with a 60-MB ESDI hard drive. Both ran the Intel 486 processor at 25 MHz and were essentially rebadged variants of the Model 70-121 and Model 70–061 with the 486/25 Power Platform preinstalled.^[22] IBM withdrew the Model 70 486 after less than two years on the market, in June 1991.^[31]

In May 1989, IBM released thePS/2 Model P70, aportable version of the PS/2 Model 70 386 that weighed 21 pounds (9.5 kg) (the same as the Model 70 386 desktop) and had a carrying handle. It featured a 20-MHz Intel 386 processor, 4 MB of RAM stock, and aflat-panel, amber-tined, monochromegas plasma display. It was IBM's third attempt at a portable PC in the United States, after the market failures that were thePortable PC and thePC Convertible.^[32][33]

The PS/2 Model 70 386 received positive reviews in the press.InfoWorld's Stephen Satchell rated the Model 70 386-121 a "very good value" and assessed it as being faster than a PS/2 Model 80 with the same 20-MHz chip, despite the latter having a more complex construction and a considerably higher cost.^[34]Personal Computing'sChristopher O'Malley found the Model 70 386-A21 the fastest 25-MHz 386 machine compared to competitors fromCompaq andAdvanced Logic Research but criticized the limited avenues for upgrading the hard drive, on account of the more-proprietary ESDI interface that the PS/2 used.^[35]: 107 Multiple reviewers forInfoWorld rated the Model 70 386-A21 a good value for technical applications (particularlyCAD/CAM) but poorly as afile server.^{[36][37]: 69} Bruce Brown inPC Magazine concluded: "IBM's PS/2 Model 70s combine small size, impressive modular design, and gobs of power in three pricey computers. You can't expand these computers much, but they come fully equipped anyway."^[38]

The PS/2 Model 70 was succeeded by two successor subfamilies: the PS/2 Model 76 and the PS/2 Model 77. Both featured redesigned cases and faster and more advanced processors. Submodels in the Model 76 range had three 32-bit Micro Channel processor slots and three 3.5-inch drive bays, while submodels in the Model 77 range had five 32-bit Micro Channel processors lots and four drive bays.^[42]

• IBM PS/2
• Computer-related introductions in 1988

• Articles with short description
• Short description is different from Wikidata