 | |
| Development | |
|---|---|
| Designer | Glenn Henderson |
| Location | United States |
| Year | 2006 |
| Builder(s) | Hunter Marine |
| Name | Hunter 27-3 |
| Boat | |
| Displacement | 7,663 lb (3,476 kg) |
| Draft | 3.44 ft (1.05 m) |
| Hull | |
| Type | Monohull |
| Construction | Fiberglass |
| LOA | 27.33 ft (8.33 m) |
| LWL | 23.56 ft (7.18 m) |
| Beam | 9.91 ft (3.02 m) |
| Engine type | Yanmar 10 hp (7 kW)diesel engine |
| Hull appendages | |
| Keel/board type | fin keel with bulb |
| Ballast | 3,400 lb (1,542 kg) |
| Rudder(s) | internally-mounted spade-typerudder |
| Rig | |
| Rig type | B&R rig |
| I foretriangle height | 27.00 ft (8.23 m) |
| J foretriangle base | 8.92 ft (2.72 m) |
| P mainsail luff | 30.33 ft (9.24 m) |
| E mainsail foot | 11.67 ft (3.56 m) |
| Sails | |
| Sailplan | Fractional riggedsloop |
| Mainsail area | 176.98 sq ft (16.442 m2) |
| Jib/genoa area | 120.42 sq ft (11.187 m2) |
| Total sail area | 297.40 sq ft (27.629 m2) |
TheHunter 27-3 andHunter 27X are a family of Americansailboats that were both designed by Glenn Henderson and both first built in 2006.[1][2][3]
The Hunter 27-3 was originally marketed by the manufacturer as the Hunter 27, but is now usually referred to as the 27-3 to differentiate it from the unrelated 1974Hunter 27, 1989Hunter 27-2 and later designs bearing the same name.[1][4][5]
The designs were built byHunter Marine in theUnited States, but are now out of production.[1][6]
The Hunter 27-3 series are both small recreationalkeelboats, built predominantly offiberglass. They havefractionalsloopB&R rigs,plumb stems,reverse transoms, internally-mounted spade-typerudders controlled bywheels and fixed finkeels.[1]
Related development
Similar sailboats
Media related toHunter 27-3 at Wikimedia Commons