| HTR-PM demonstration plant | |
|---|---|
 | |
| Country | People's Republic of China |
| Location | Shidao Bay Nuclear Power Plant,Rongcheng,Weihai,Shandong |
| Coordinates | 36°58′20″N122°31′44″E / 36.97222°N 122.52889°E /36.97222; 122.52889 |
| Status | Operational |
| Construction began | 9 December 2012 (2012-12-09) |
| Commission date | 20 December 2021 |
| Nuclear power station | |
| Reactor type | pebble-bed reactorHTGR |
| Power generation | |
| Nameplate capacity |
|
TheHTR-PM (Chinese:球床模块式高温气冷堆核电站) is a Chinesesmall modular nuclear reactor.It is ahigh-temperature gas-cooled (HTGR)pebble-bedgeneration IV reactor evolved from theHTR-10prototype. The technology is intended to replace coal-fired power plants in China's interior, in line with the country's plan to reachcarbon neutrality by 2060.[1]
The first plant has an electrical output of 210 MW. It began producing power in December 2021 and started commercial operation in late 2023.
The HTR-PM is ahigh-temperature gas-cooled (HTGR)pebble-bed reactor. While the GermanAVR andTHTR-300, operating from 1969 to 1988, were the first pebble-bed reactors and operated at similar temperatures, the HTR-PM is the first such design using modular construction and the secondsmall modular reactor, following Russia'sAkademik Lomonosov floating plant in 2019. It is ageneration IV design. The technology is based on theHTR-10prototype reactor.[2]
The reactor unit has a thermal capacity of 250 MW. Two reactors are connected to a single steam turbine to generate 210 MW of electricity (210 MWe).[2]
HTR-PM uses ahelium coolant and agraphite moderator. Each reactor is loaded with more than 400,000 pebbles.
Each pebble is 60 mm in diameter. They have an outer layer of graphite. Each contains some 12,000 four-layer, ceramic-coated fuel particles of uranium (totaling 7 g)enriched to 8.5%uranium-235 dispersed in a graphite matrix.[3]
The reactor core is 3 m in diameter and 11 m in height. Pressure is maintained at 7 MPa. Steam pressure (for heat transfer) is at 13 MPa and temperature at 567 °C (1,053 °F).[3]
Primary reactor elements are manufactured in a factory and transported to the site.[3]
The reactor is inherently safe, even if the primary loop loses power, it will cool passively and will not suffer a meltdown.[4][5] Even if the coolant pipes of the primary loop rupture and detach from the reactor core (damage beyond baseline design), the core does not melt down and will cool itself through natural convection, without releasing radioactive materials.[6]
The demonstration project for theHigh-Temperature gas-cooledReactorPebble-bedModule (HTR-PM) was launched in 2001.[7] Work on the first demonstration power plant, composed of two reactors driving a single steam turbine, began in December 2012 inShidao Bay Nuclear Power Plant in Shandong province. The pressure vessels of the two reactors were installed in 2016.
A 2018 paper byRainer Moormann recommended additional safety measures based on experience with the AVR reactor.[8]
The steam generator shell, hot gas duct shell and reactor pressure vessel shell of the first reactor in the project were successfully paired on 28 April 2020, paving the way for the installation of the main helium fan.[9][10]
Cold functional tests were successfully completed between October and November 2020. The air and helium mixture was pressurized to a maximum of 8.9 MPa in the primary coolant loop.[11] Following the cold functional tests, the hot tests were performed in three stages: vacuum dehumidification, heating and dehumidification and hot functional tests. The hot tests began in December 2020.[12] On 12 September 2021, the first of two reactors achievedcriticality.[13] On 11 November 2021, reactor two achieved firstcriticality.[14] On 20 December 2021, reactor one was connected to the state power grid and began producing power.[15] On 9 December 2022, the HTR-PM project demonstrated it had reached "initial full power".[16] Two world-first safety demonstrations were performed, showing that in the event of a total power supply loss, the decay heat inside the reactor would dissipate and cool down naturally without any human intervention or emergency core cooling. The plant entered commercial operation in December 2023.[17] An updated larger power plant, HTR-PM600, is planned with a capacity of 600 MWe using six HTR-PM reactor units.[18]
{{cite journal}}: CS1 maint: DOI inactive as of November 2024 (link)| Operating power plants | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Power plants under construction | |||||||||||
| Planned power plants |
| ||||||||||
| Proposed power plants | |||||||||||
| Research, experimental and prototype reactors | |||||||||||
| Commercial reactor designs | |||||||||||
| Organizations |
| ||||||||||
| Related categories | |||||||||||
