Aguy (probably fromDutchgei, "brail") is a line (rope) attached to and intended to control the end of aspar on a sailboat.[1] On a modernsloop-riggedsailboat with a symmetricspinnaker, thespinnaker pole is the spar most commonly controlled by one or more guys.
There are two primary types of guys used to control a spinnaker pole:
Theafterguy,working guy, or simplyguy and sometimes known as abrace is attached to the windwardclew of the spinnaker, and runs through the jaws on the outboard end of the pole and back to thecockpit. The afterguy is used to rotate the outboard end of the pole around the mast in order to optimize the sail's effectiveness, depending on the direction of the wind. Because a spinnaker has two clews, there is always a second line identical to the afterguy attached to theleeward clew of the spinnaker. This is called thesheet and serves a slightly different function. When the boatjibes, the spinnaker pole will be moved from one side of the boat to the other, causing the sheet to become the guy and vice versa.
Aforeguy may also be used to control the height of the spinnaker pole. It is attached either to the end of the pole or to a bridle on the bottom of the pole, and runs through a padeye on the foredeck rather than directly aft to the cockpit. The foreguy is used to keep the end of the pole from lifting up under heavy wind. In addition, it can be used to change the shape of the spinnaker slightly to make the sail more efficient. The foreguy may be referred to as adownhaul if it is attached to a bridle at the pole's midpoint, but this term is used for other parts of a boat's rigging as well.
