Graben is aloan word fromGerman, meaning 'ditch' or 'trench'. The first known usage of the word in the geologic context was byEduard Suess in 1883.[1] The plural form is eithergraben[2] orgrabens.[3]
A graben is avalley with a distinctescarpment on each side caused by the displacement of a block of land downward. Graben often occur side by side withhorsts. Horst and graben structures indicate tensional forces and crustal stretching.
Graben are produced from parallel normal faults, where the displacement of thehanging wall is downward, while that of thefootwall is upward. The faults typically dip toward the center of the graben from both sides. Horsts are parallel blocks that remain between graben; the bounding faults of a horst typically dip away from the center line of the horst. Single or multiple graben can produce arift valley.
In manyrifts, the graben are asymmetric, with a major fault along only one of the boundaries, and these are known as half-graben. The polarity (throw direction) of the main bounding faults typically alternates along the length of the rift. The asymmetry of a half-graben strongly affects syntectonic deposition. Comparatively littlesediment enters the half-graben across the main bounding fault because of footwall uplift on the drainage systems. The exception is at any major offset in the bounding fault, where a relay ramp may provide an important sediment input point. Most of the sediment will enter the half-graben down the unfaulted hanging wall side (e.g.,Lake Baikal).[4]
Rima Ariadaeus on theMoon is thought to be a graben. The lack of erosion on the Moon makes its structure with two parallel faults and the sunken block in between particularly obvious.
