 | This articleneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Globe sight" – news ·newspapers ·books ·scholar ·JSTOR(March 2022) (Learn how and when to remove this message) |
Aglobe sight is a frontsight component used to assist the aiming of a gun/device, usually those intended to launch projectiles, such as firearms, airguns, and crossbows. It is found in particular as a front sight element onrifles.
To obtain a usable sighting line, the diopter has to have a complementing rear sight element.
Diopter and globe sighting lines are commonly used inISSF match rifle shooting events.
The globe front sight consists of a hollowcylinder with a threaded cap, which allows differently shaped interchangeable front sight elements to be used. Most common are posts of varying widths and heights or rings or holes of varying diameter — these can be chosen by the shooter for the best fit to the target being used. Tintedtransparent plastic insert elements may also be used, with a hole in the middle; these work the same way as an opaque ring, but provide a less obstructed view of the target. High-end target front sight tunnels normally also accept accessories like adjustable aperture and optical systems to ensure optimal sighting conditions for match shooters. Some high-end target sight line manufacturers also offer front sights with integrated aperture mechanisms.[1]
The complementing rear sight element may be anopen type iron sight or anaperture sight as used in ghost rings and target aperture sights such as atarget shooting diopter sight.
| This articleneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Globe sight" – news ·newspapers ·books ·scholar ·JSTOR(September 2023) (Learn how and when to remove this message) |
The use of round rear and front sighting elements for aiming at round targets, like used in ISSF match shooting, takes advantage of the natural ability of the eye and brain to easily alignconcentric circles (circles all having a common centre).[2]
For optimal aiming and comfort, the shooter should focus the aiming eye on the front sighting element. To avoid eye fatigue and improve balance, the non-aiming eye should be kept open. The non-aiming eye can be blocked from seeing distractions by mounting a semi-transparent occluder to the diopter.
Even for the maximum precision, there should still be a significant area of white visible around the bullseye and between the front and rear sight ring (if a front ring is being used). Since the best key to determining center is the amount of light passing through the apertures, a narrow, dim ring of light can actually be more difficult to work with than a larger, brighter ring.
The precise sizes of the employed components are quite subjective, and depend on both shooter preference and ambient lighting, which is why target rifles come with easily replaceable front sight inserts, and adjustable aperture mechanisms.
.jpg)