Ford RS200
Overview
Manufacturer	Reliant Motor Company forFord Europe
Production	1984–1986
Assembly	United Kingdom:Reliant Motor Company,Shenstone,England
Designer	Tony Southgate John Wheeler Ian Callum Filippo Sapino atGhia[1]
Body and chassis
Class	Sports car (S)
Body style	2-doorcoupé
Layout	Mid-enginedfour-wheel drive
Powertrain
Engine	1.8 LCosworth BDTstraight-4 2.1 LCosworth BDT-E straight-4
Transmission	5-speedmanual
Dimensions
Wheelbase	2,540 mm (100.0 in)
Length	3,988 mm (157.0 in)
Width	1,752 mm (69.0 in)
Height	1,320 mm (52.0 in)
Chronology
Predecessor	Ford Escort RS 1700T
Successor	Ford Sierra RS Cosworth

TheFord RS200 is a mid-engined,all-wheel-drivesports car that was produced byReliant Motor Company forFord Motorsport inShenstone, UK, from 1984 to 1986. The road-going RS200 was the basis for Ford'sGroup Brally car and was designed to comply withFIA homologation regulations, which required 200 parts kits to be produced and at least one road-legal car to be assembled. The car was first displayed to the public at the Belfast Motor Show.

Following the introduction of the Mk3 Escort in 1980, Ford Motorsport set about developing a rear-wheel-drive, turbocharged variant of the vehicle that could be entered into competition inGroup B rally racing. Ford had dominated Group B's predecessors,Group 3 andGroup 4 in the late 1960s and throughout the 1970s with the Mk1 and Mk2 Escorts. It dubbed the new vehicle theEscort RS 1700T. A problem-filled development, plus internal apathy against the car (which had little in common with the production version of the Mk3 Escort) led Ford to abandon the project in frustration in 1983, leaving them without a new vehicle to enter into Group B. Not wanting to abandon Group B or simply "write off" the cost of developing the failed 1700T, executives decided to make use of the lessons learned developing that vehicle in preparing a new, purpose-built rally car. In addition, Ford executives became adamant that the new vehicle would feature all-wheel-drive, an addition they felt would be necessary to allow it to compete properly with all-wheel-drive models fromPeugeot andAudi.

The new vehicle was a unique design, featuring a plastic-fiberglass composite body designed byGhia, a mid-mounted engine and four-wheel drive. The cars were built on behalf of Ford by another company well known for its expertise in producing fibreglass bodies -Reliant. To aid weight distribution, designers mounted the transmission at the front of the car, which required that power from the mid-mounted engine go first up to the front wheels and then be run back again to the rear, creating a complex drive train setup. The chassis was designed by formerFormula One designerTony Southgate, and Ford's John Wheeler, a former F1 engineer, aided in early development. Adouble wishbone suspension setup with twin dampers on all four wheels aided handling and helped give the car what was often regarded as being the best balanced platform of any of the RS200's contemporary competitors. The Ford parts-bin was raided to help give the RS200 a Ford corporate look; for example, the front windscreen and rear lights were identical to those of the earlySierra and the doors were cut-down Sierra items. Small parts-bin items like switchgear were also used to save development time and expenses.

Power came from a 1,803 cc (1.8 L; 110.0 cu in), single turbocharged Ford-Cosworth "BDT" engine producing 250 hp (186 kW) in road-going trim, and between 350 and 450 hp (261 and 336 kW) in racing trim; upgrade kits were available for road-going versions to boost power output to over 300 hp (224 kW). Although the RS had the balance and poise necessary to be competitive, itspower-to-weight ratio was poor by comparison, and its engine produced notorious low-RPM lag, making it difficult to drive and ultimately less competitive. Factory driverKalle Grundel's third-place finish at the 1986WRC Rally of Sweden represented the vehicle's best-ever finish in Group B rallying competition, although the model did see limited success outside of the ultra-competitive Group B class. However, only one event later, at theRally de Portugal, a Ford RS200 was involved in one of the most dramatic accidents in WRC history, claiming the lives of three spectators and injuring many others.^[2] Another Ford RS200 was crashed by Swiss Formula One driverMarc Surer against a tree during the 1986 Hessen-Rallye in Germany, killing his co-driver and friend Michel Wyder instantly.

The accident at Rally Portugal set off a chain reaction and the RS200 became obsolete after only one full year of competition as theFIA, the governing board, which at the time controlled WRC rally racing, abolished Group B after the 1986 season. For 1987, Ford had planned to introduce an "Evolution" variant of the RS200, featuring a development of the BDT engine, called later asBDT-E, displacing 2,137 cc (2.1 L; 130.4 cu in), developed by BritonBrian Hart. Power figures for the engine vary quite a bit from source to source, depending on the mechanical setup e.g. boost levels, power output ranges from 550 hp (558 PS; 410 kW) to 815 hp (826 PS; 608 kW); although most typical output was 580 hp (588 PS; 433 kW) at 8,000 rpm and 400 lb⋅ft (542 N⋅m) at 5,500 rpm oftorque.^[3] The ban on Group B racing effectively forced the E2 model into retirement; however, more than a dozen of them were successfully run from August 1986 until October 1992 in theFIA European Championships for Rallycross Drivers events all over Europe, and Norwegian Martin Schanche claimed the 1991 Europeanrallycross title with a Ford RS200 E2 that produced over 650 bhp (485 kW).

One RS200, which found its way into circuit racing, originated as a road car; it was converted toIMSA GTO specification powered by an over-750 BHP 2.0 litre turbo BDTE Cosworth Evolution engine.^[4] Competing against the numerous factory-backed teams such as Mazda, Mercury and Nissan, with their newly builtspaceframe specials, despite being a privateer, the car never achieved any real success to be a serious contender^[5][6][7] and was kept by the original owner. A parts car was built in England and later used to compete in the unlimited category at thePikes Peak International Hill Climb, where it was driven by SwedeStig Blomqvist in 2001, 2002 and 2004^[8] and in 2009 by former British Rallycross champion Mark Rennison.

In June 2024, Ford &Boreham Motorworks teased a "Remaster" of the RS200, alongside the Ford Escort MK1 continuation.^[9]

FIA homologation rules forGroup B required the construction of at least 200 road-legal vehicles, and Ford contracted Reliant Motors PLC to construct these 200 units at their Shenstone facility, with spare parts for another 20+ units put aside for the racing teams. Those chassis and spare parts were later also used to build a couple of non-genuine, so-calledbitsa cars. The Ford RS200 originally cost £49,995 in 1985. However, due to its cult status and Group B legacy, the car's value has increased to over six figures, with the highly sought-after Evolution (EVO) models selling for significantly more. For example, in 2017, a Ford RS200 Evolution sold for $550,000 at a Bonhams auction in the US, which is the record auction price for the car. In November 2023, another Ford RS200 Evolution sold for £486,000 at Iconic Auctioneers.^[10]

Group B required any modifications and upgrades had to be homologated by building a further batch of 20 road models to certify the revised specification. Even though Group B had been banned by the time the evolution model was ready, Ford produced the road cars regardless.

A total of 24 of the 200 original cars were reportedly later converted to the so-called "Evolution" models, mostly marked by their owners as "E" or "E2" types. Ford's first intention was to mark the FIA-required 20 "Evo" cars as series numbers 201 to 220 but as this was actually not necessary according to the FIA rules they later kept their original series numbers^[11] (e.g. 201 = 012, 202 = 146, 203 = 174 et cetera). Changes were mostly mechanical, with the engine being designated BDT-E. Additional cool ducts were fitted above the roof, on either side of the main engine intake.

During the sales programme a Canadian entrepreneur, Murray H. de Weerdt, approached Ford with a proposal to purchase 20 cars and to commission them to have a better level of equipment in an attempt to produce a more marketable "ultimate RS200". He coined the term "The 'S' Version" although permission was never formerly granted by Ford to use this designation however he went on to produce sale literature. Changes included wider seats, Air Conditioning, improved cooling and increased power. A total of 20 were produced, 16 standard cars and 4 evolution spec, including 4 in red.^[12] The deal ultimately never came to fruition although Mr de Weerdt went on to own one of the cars himself, chassis number 110. The remaining 19 were sold by Ford to private buyers. The full chassis number list is still available where the "S" designation can be seen.^[13]

Ford RS200 at Goodwood

---

Problems playing this file? Seemedia help.

• Longitudinally-mounted,mid-engine, four-wheel-drive layout
• Head/blockaluminium alloy/aluminium alloy
• 4 cylinders in line,Nikasil integrated liners
• 5 main bearings. Water cooled, electric fan
• Bore: 86 mm (3.39 in)
• Stroke: 77.6 mm (3.06 in)
• Capacity: 1,803 cc (1.8 L; 110.0 cu in)
• Valve gear: Dual overhead cams, 4 valves per cylinder, toothed belt camshaft drive

Compression ratio: 7.2:1.BoschMotronicengine management system andfuel injection.Garrett T3turbocharger/boost pressure 23 psi (1.6 bar).

• Max. power: 450 PS (331 kW; 444 hp) at 8,000 rpm
• Max. torque: 360 lb⋅ft (490 N⋅m) at 5,500 rpm

• 5-speed manual, AP twin plate paddle clutch with cerrametallic linings

Final drive: Spiral bevel, ratio 4.375 to transfer ratio of 1.15

• Front, independent, double wishbones, twin coil springs and telescopic dampers, anti-roll bar
• Rear, independent, double wishbones, twin coil springs and telescopic dampers, anti-roll bar, adjustable toe control link

• Rack and pinion, a small quantity of cars also had hydraulic power assistance. Steering wheel diameter 14 in, 1.8 turnslock-to-lock

Dual circuits, split front/rear. Front 11.8 in (300 mm) diameter ventilated discs. Rear 11.8 in (300 mm) diameter ventilated discs, no vacuum servo. Handbrake, mechanical fly-off and hydraulic centre lever acting on separate, mechanically operated rear calipers.

Ford magnesium alloy, 6–8 in rims (8¾ in and 11 in option for racing tyres). Tyre dependent on conditions (Pirelli Monte Carlo intermediates 245/40 16 on test car), 16 in diameter, pressures dependent on tyres used.

• Length: 157.5 in (4,000 mm)
• Width: 69.0 in (1,753 mm)
• Height: variable
• Wheelbase: 99.6 in (2,530 mm)
• Track (Front/Rear): 59.1 / 58.9 in (1,501 / 1,496 mm)
• Weight: 2,315 lb (1,050 kg)

^{[citation needed]}

Top speeds:

Acceleration from rest:

Standing 1/4-mile: 11.4 sec, 115 mph (185 km/h)

Standing km: Not known

Acceleration (s):

• Heightened Perception -Autocar 12 November 1986 issue

Wikimedia Commons has media related toFord RS200.

• Ford RS 200 Information

• Ford Rally Sport vehicles
• Rally cars
• Sports cars
• Group B cars
• Rear mid-engine, all-wheel-drive vehicles
• Cars introduced in 1984
• Cars discontinued in 1986

• Webarchive template wayback links
• Articles with short description
• Short description is different from Wikidata
• Articles with hAudio microformats
• All articles with unsourced statements
• Articles with unsourced statements from February 2022
• Commons category link is on Wikidata