 | |
| Year created | 2003 |
|---|---|
| Supersedes | PC Card |
| No. of devices | 1 per slot |
| Speed |
|
| Style | Serial |
| Hotplugging interface | Yes |
| External interface | Yes |
ExpressCard, initially calledNEWCARD,[1] is an interface to connectperipheral devices to acomputer, usually alaptop computer. The ExpressCardtechnical standard specifies the design of slots built into the computer and ofexpansion cards to insert in the slots. The cards containelectronic circuits and sometimes connectors for external devices. The ExpressCard standard replaces thePC Card (also known as PCMCIA) standards.
ExpressCards can connect a variety of devices to a computer includingmobile broadband modems (sometimes calledconnect cards),IEEE 1394 (FireWire) connectors,USB connectors,Ethernet network ports,Serial ATA storage devices,solid-state drives, external enclosures for desktop-sizePCI Expressgraphics cards and other peripheral devices,wireless network interface controllers (NIC),TV tuner cards,Common Access Card (CAC) readers, andsound cards.
Originally developed by thePersonal Computer Memory Card International Association (PCMCIA), the ExpressCard standard is maintained by theUSB Implementers Forum (USB-IF). The host device supportsPCI Express,USB 2.0 (including Hi-Speed), andUSB 3.0 (SuperSpeed)[2] (ExpressCard 2.0 only) connectivity through the ExpressCard slot; cards can be designed to use any of these modes. The cards arehot-pluggable. The ExpressCard standard is anopen standard byITU-T definition, and can be obtained from the USB-IF website free of charge.[3]
USB-IF administers the ExpressCard Compliance Program, under which companies earn the right to obtain a license to use the ExpressCard logo on their compliant products.[4]
The ExpressCard standard specifies two form factors,ExpressCard/34 (34 millimetres (1.3 in) wide) andExpressCard/54 (54 mm (2.1 in) wide, in an L-shape)—the connector is the same on both (34 mm wide). Standard cards are 75 mm (3.0 in) long (10.6 mm (0.42 in) shorter than CardBus) and 5 mm (0.20 in) thick, but may be thicker on sections that extend outside the standard form forantennas, sockets, etc. With its 75 mm standard length, the ExpressCard will protrude 5 mm over the holder's surface (e.g. laptop surface), whereas a variant with 70 mm length remains level with the surface.
The older PC Cards came in 16-bit and the later 32-bitCardBus designs. The major benefit of the ExpressCard over the PC card is more bandwidth, due to the ExpressCard's direct connection to the system bus over a PCI Express ×1 lane and USB 2.0, while CardBus cards only interface with PCI. The ExpressCard has a maximum throughput of 2.5 Gbit/s through PCI Express and 480 Mbit/s through USB 2.0 dedicated for each slot, while all CardBus and PCI devices connected to a computer usually share a total 1.06 Gbit/s bandwidth.
The ExpressCard standard specifies voltages of either 1.5 V or 3.3 V; CardBus slots can use 3.3 V or 5.0 V. The ExpressCard FAQ claims lower cost, better scalability, and better integration with motherboard chipset technology than Cardbus. PCMCIA devices can be connected to an ExpressCard slot via an adapter.
When the PC Card was introduced, the only other way to connect peripherals to a laptop computer was viaRS-232 andparallel ports of limited performance, so it was widely adopted for many peripherals. More recently, virtually all laptop equipment has 480 Mbit/s Hi-SpeedUSB 2.0 ports, and most types of peripheral which formerly used a PC Card connection are available for USB or are built-in, making the ExpressCard less necessary than the PC Card was in its day. Many laptop computers do not have an ExpressCard slot.
.jpg)
_(cropped).jpg)
An ExpressCard slot was commonly included on high-end laptops from the mid 2000s to the early 2010s:
Because of the lack of backward compatibility, some laptop manufacturers initially released models incorporating both CardBus (PCMCIA,PC Card) and ExpressCard slots. These included certain models ofAcer Aspire,Acer Extensa,Toshiba Satellite,Dell Latitude and Precision, MSI S42x and LenovoThinkPad Z60m, R52, T60, R61 and T61.
In March 2005, the Personal Computer Memory Card International Association (PCMCIA) showed some of the first ExpressCard products at the CeBIT trade show inGermany.[9] A large number of ExpressCard devices were presented.[10][11][12][13][14][15][16][17][18][19][20][excessive citations]
In November 2006,Belkin announced that it was launching the first ExpressCarddocking station, which uses the PCIe part of an ExpressCard connection to enable 1600x1200 video and the USB part to provide USB, audio and network ports.[21][22] This points to the ability for ExpressCard to allow more capable non-OEM docking stations for laptop computers.
In 2007, Sony introduced its Vaio TZ model, which incorporates ExpressCards. Also the Sony Vaio FZ and Vaio Z series have the ExpressCard/34 Slot integrated in them. Sony also uses the ExpressCard/34 form factor for the flash memory modules in itsXDCAM EX/SxS basedcamcorders, making the copying of video data between these cameras and ExpressCard-equipped laptops easier. For this reason, Sony also offers a USB-based SxS reader for desktop computers.
TheToshiba Satellite P and X 200/205 series of laptops and desktop replacements have an ExpressCard/34 slot since April 2007.[citation needed] In P200 series it's a /54 size not /34.[23]
Ever since PCMCIA disbanded in 2009, newer laptops from 2010 on more commonly do not include ExpressCard slots except for some business-oriented models (e.g. some Lenovo models use it for supporting a smart card reader).[24] For WWAN connectivity cards, either mini-PCIe slots or USB connected variants have become the preferred connection methods. For external desktop graphics card enclosures and other peripherals that interface with PCI Express,Thunderbolt has supplanted ExpressCard in that role due to its faster speed and ability to use multiple PCIe 2.0 lanes; the first and second Thunderbolt revisions offered 20 Gbit/s of maximum bandwidth with four PCIe 2.0 lanes while ExpressCard could only muster 5 Gbit/s maximum with one PCIe 2.0 lane.[25][26]
The ExpressCard 2.0 standard was introduced on March 4, 2009, at CeBIT in Hannover. It provides a singlePCIe 1.0 2.5 GT/s lane (optionally PCIe 2.0 with 5 GT/s) and a USB 3.0 "SuperSpeed" link with a raw transfer speed of 5 Gbit/s (effective transfer speed up to 400 MB/s).[27][28] It is forward and backward compatible with earlier ExpressCard modules and slots. USB 3.0 SuperSpeed compatibility is achieved by sharing the pins with the PCIe link. An inserted card signals which mode should be used.[29]
The standard failed to gain widespread use and some Taiwanese manufacturers discontinued it as early as 2011.[30][31] After the dissolution of the PCMCIA in 2010, the specification, associated documentation and licensing responsibilities were moved to theUSB Implementers Forum. The specifications were last revised in 2009, and removed from their website in 2018.[32]
| Main articles | .svg) | |
|---|---|---|
| Types |
| |
| General | |
|---|---|
| Standards |
|
| Storage |
|
| Peripheral | |
| Audio | |
| Portable | |
| Embedded | |
Interfaces are listed by their speed in the (roughly) ascending order, so the interface at the end of each section should be the fastest.  Category | |