Ingeomorphology,drainage systems, also known asriver systems, are the patterns formed by thestreams,rivers, andlakes in a particulardrainage basin. They are governed by the topography of land, whether a particular region is dominated by hard or soft rocks, and the gradient of the land.Geomorphologists andhydrologists often view streams as part of drainage basins (andsub-basins). This is thetopographic region from which a stream receivesrunoff,throughflow, and its saturated equivalent,groundwater flow. The number, size, and shape of the drainage basins varies and the larger and more detailed thetopographic map, the more information is available.[1]
Per the lie ofchannels, drainage systems can fall into one of several categories, known as drainage patterns. These depend on thetopography andgeology of the land.[2]
All forms of transitions can occur between parallel, dendritic, and trellis patterns.
A drainage system is described as accordant if its pattern correlates to the structure and relief of the landscape over which it flows.[2]
A discordant system or pattern does not correlate to the topography and geology of the area. Discordant drainage patterns are classified into two main types:antecedent andsuperimposed,[2] whileante position drainage patterns combine the two. Inantecedent drainage, a river's vertical incision ability matches that of land uplift due to tectonic forces.Superimposed drainage develops differently: initially, a drainage system develops on a surface composed of 'younger' rocks, but due to denudation activities this surface of younger rocks is removed and the river continues to flow over a seemingly new surface, but one in fact made up of rocks of old geological formation.
Dendritic drainage systems (fromGreekδενδρίτης,dendrites, "of or like a tree") are not straight and are the most common form of the drainage system. In this, there are many sub-tributaries (analogous to the twigs of a tree), which merge intotributaries of the main river (the branches and the trunk of the tree, respectively). They are seen to feed a river channel that matches and is strongly accordant to the overriding gradient of the land. Truly dendritic systems form inV-shaped valleys; as a result, the rock types must beimpervious andnon-porous.[3]
A parallel drainage system occurs on elongate landforms like outcropping resistant rock bands), typically following natural faults or erosion (such as prevailing wind scars). The watercourses run swift and straight, with very few tributaries, and all flow in the same direction. This system forms on very long, uniform slopes, for instance, high rivers flowing southeast from theAberdare Mountains in Kenya and many rivers ofMyanmar.
This sometimes indicates a major fault that cuts across an area of steeply folded bedrock.
The geometry of a trellis drainage system is similar to that of a common gardentrellis. Along a strike valley, smaller tributaries feed into the steep slopes of mountainsides. These tributaries enter the main river about perpendicular, causing a trellis-like appearance of the system. They form where hard and soft formations exist on both banks of the main river, and are reflective of height, accentuated by erosion. Trellis drainage is characteristic of folded mountains, such as theAppalachian Mountains in North America and in the north part ofTrinidad.[2]
Rectangular drainage develops on rocks that are of approximately uniform resistance toerosion, but which have two directions ofjointing at approximately right angles or 90 degrees. The joints are usually less resistant to erosion than the bulk rock so erosion tends to preferentially open the joints and streams eventually develop along the joints. The result is a stream system in which streams consist mainly of straight line segments with right-angle bends and tributaries join larger streams at right angles.[2] This pattern can be found with theArun River in Nepal.
In a radial drainage system, the streams radiate outwards from a central high point.Volcanos usually have archetypal features on which this commonly develops are modest or harddomes pattern develops when streams flow in many general directions (meaning quite long-term)
In India, theAmarkantak range andRamgarh crater are most archetypal; andDogu'a Tembien inEthiopia.[4]
When the streams converge at a point, which is generally a depression or a basin they form centripetal or inland drainage pattern.
A deranged drainage system is a drainage system indrainage basins where there is no coherent pattern to the rivers and lakes. These can form in areas with extensive limestone deposits, where surface streams can disappear into the groundwater via caves and subterranean drainage routes.[5] They can also form in areas where there has been much geological disruption.
A classic example is theCanadian Shield. During the lastice age, thetopsoil was scraped off, leaving mostly bare rock. The melting of the glaciers left land with many irregularities of elevation and a great deal of water to collect in the low points, resulting in the region's many lakes. The drainage basins are young and are still sorting themselves out; eventually the system will stabilize.[1]
In an annular drainage pattern, streams trace a tangential or greater concentric path along a belt of weak rock so, with others, a roughly traced out ring can be seen. It is best displayed by streams draining a maturely dissectedstructural dome orbasin where erosion has exposed rimmingsedimentary strata of greatly varying degrees of hardness, as in theRed Valley, which nearly encircles the domal structure of theBlack Hills ofSouth Dakota.
Astroblemes and muddiapirs are also thought to be able to cause this kind of drainage pattern.[6]
Angular drainage patterns form wherebedrock joints and faults intersect at angles other than rectangular drainage patterns. Angles can be more or less than 90 degrees.[7]
Anintegrated drainage is a mature drainage system characteristic of arid climates. It is formed by coalescing of individual basins formerly separated by high ground, such as mountains or ridges. Headward erosion from a lower basin may breach the barrier, as may spilling over from a higher basin due toaggradation (accumulation of sediments in the basin). The effect of integration of a drainage system is to replace local higherbase levels with a single lower base level.[8]
An example of an integrated drainage is the area drained by theRio Grande River. Thesedimentary basins forming the modern Rio Grande Valley were not integrated into a single river system draining into the Gulf of Mexico until relatively recent geologic time. Instead, the basins formed by the opening of the Rio Grande rift were initiallybolsons, with no external drainage and a centralplaya.[9] An axial river existed in the Espanola Basin as early as 13 million years ago, reaching the Santo Domingo Basin by 6.9 million years ago. However, at this time, the river drained into a playa in the southernAlbuquerque Basin where it deposited thePopotosa Formation.[10] The upper reach of this river corresponded to the modernRio Chama, but by 5 million years ago, an ancestral Rio Grande draining the easternSan Juan Mountains had joined the ancestral Rio Chama.[9]
The ancestral Rio Grande progressively integrated basins to the south, reaching the Palomas basin by 4.5 million years ago, the Mesilla basin by 3.1 million years, to Texas by 2.06 million years, and finally joining the Pecos River at 800,000 years to drain into the Gulf of Mexico. Volcanism in the Taos Plateau reduced drainage from the San Luis basin until a spillover event 440,000 years ago that drainedLake Alamosa and fully reintegrated the San Luis basin into the Rio Grande basin.[9]
Integrated drainages were widespread in western North America in thePaleocene andEocene,[11] and there is evidence of integrated drainages on the surface ofMars.[12]
| Large-scale features | |
|---|---|
| Alluvial rivers | |
| Bedrock river | |
| Bedforms | |
| Regional processes | |
| Mechanics | |
Authority control databases: National |
|---|
