Theslide valve is arectilinearvalve used to control the admission of steam into and emission of exhaust from the cylinder of asteam engine.

In the 19th century, most steam locomotives used slide valves to control the flow of steam into and out of thecylinders. In the 20th century, slide valves were gradually superseded bypiston valves, particularly in engines usingsuperheated steam. There were two reasons for this:

• With piston valves, the steam passages can be made shorter. This reduces resistance to the flow of steam and improves efficiency.
• It is difficult tolubricate slide valves adequately in the presence of superheated steam.

TheD slide valve, or more specificallyLong D slide valve, is a form of slide valve, invented byWilliam Murdoch and patented in 1799. It is named after the hollow central D-sectioned piston.

This valve worked by "connecting the upper and lower valves so as to be worked by one rod or spindle, and in making the stem or tube which connects them hollow, so as to serve for an induction pipe to the upper end of the cylinder." This allowed two valves to do the work of four.

The above description (referring to upper and lower valves) clearly relates to an engine with a vertical cylinder, such as abeam engine. Where the cylinders are horizontal, as in asteam locomotive, the valves would be side-by-side.

The balanced slide valve was invented by theScottish engineerAlexander Allan. It was not much used in the UK but, at one time, had great popularity in the United States. It gave some of the advantages of a piston valve to a slide valve by relieving the pressure on the back of the valve, thus reducing friction and wear.

Wikimedia Commons has media related toSteam engines with slide valves.

• The Slide Valve

• Engine valves

• Articles with short description
• Short description matches Wikidata
• Commons category link is on Wikidata