This articleneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "DRB Class 50" – news ·newspapers ·books ·scholar ·JSTOR(December 2014) (Learn how and when to remove this message)

DRB Class 50
Deutsche Bundesbahn (DB) 052 740-8 in Mayen, May 2006
Type and origin Power type Steam Builder Henschel & Sohn (650) Berliner Maschinenbau (370) Lokomotivfabrik Floridsdorf (368) Krupp (324) Krauss-Maffei (317) Borsig (179) Maschienenbau und Bahnbedarf AG (170) Schichau-Werke (135) Arnold Jung Lokomotivfabrik (105) Maschinenfabrik Esslingen (69) Škoda Works (140) ČKD (35) Deutsche Waffen- und Munitionsfabriken (72) Ostrowiece (26) SA des Usines Métallurgiques du Hainaut (24) SA la Métallurgique, Tubize (38) John Cockerill (42) Ateliers de construction de La Meuse (26) Forges Usines et Fonderies Haine-Saint-Pierre (28) Anglo-Franco-Belge (26) SA l'Énergie (16) Build date 1939–1948 Total produced 3160
Specifications Configuration: ​  • Whyte 2-10-0  • UIC 1′E h2  • German G 56.15 Gauge 1,435 mm (4 ft 8+1⁄2 in) Leading dia. 0,850 mm (33+1⁄2 in) Driver dia. 1,400 mm (55+1⁄8 in) Tender wheels 1,000 mm (39+3⁄8 in) Wheelbase: ​  • Axle spacing (Asymmetrical) 2,600 mm (8 ft6+3⁄8 in) + 1,650 mm (5 ft 5 in) + 1,650 mm (5 ft 5 in) + 1,650 mm (5 ft 5 in) + 1,650 mm (5 ft 5 in) =  • Engine 9,200 mm (30 ft2+1⁄4 in)  • Tender 1,900 mm (6 ft2+3⁄4 in) + 1,900 mm (6 ft2+3⁄4 in) + 1,900 mm (6 ft2+3⁄4 in) = 5,700 mm (18 ft8+3⁄8 in)  • incl. tender 18,890 mm (61 ft11+3⁄4 in) Length: ​  • Over headstocks 21,640 mm (71 ft 0 in)  • Over buffers 22,940 mm (75 ft3+1⁄8 in) Height 4,500 mm (14 ft9+1⁄8 in) Axle load 15.3 t (15.1 long tons; 16.9 short tons) Adhesive weight 76.6 t (75.4 long tons; 84.4 short tons) Empty weight 78.6 t (77.4 long tons; 86.6 short tons) Service weight 88.1 t (86.7 long tons; 97.1 short tons) Tender type 2′2′ T 26 Fuel type Coal Fuel capacity 8 t (7.9 long tons; 8.8 short tons) Water cap. 26 m3 (5,720 imp gal; 6,870 US gal) Firebox: ​  • Grate area 3.9 m2 (42 sq ft) Boiler: ​  • Pitch 3,050 mm (10 ft1⁄8 in)  • Tube plates 5,200 mm (17 ft3⁄4 in)  • Small tubes 54 mm (2+1⁄8 in), 113 off  • Large tubes 133 mm (5+1⁄4 in), 35 off Boiler pressure 16 bar (16.3 kgf/cm2; 232 psi) Heating surface: ​  • Firebox 15.9 m2 (171 sq ft)  • Tubes 90.4 m2 (973 sq ft)  • Flues 71.3 m2 (767 sq ft)  • Total surface 177.6 m2 (1,912 sq ft) Superheater: ​  • Heating area 64.1 m2 (690 sq ft) Cylinders Two, outside Cylinder size 600 mm × 660 mm (23+5⁄8 in × 26 in) Valve gear Heusinger (Walschaerts) with lifting links Train heating Steam
Performance figures Maximum speed 80 km/h (50 mph) (both directions) Indicated power 1,625 PS (1,200 kW; 1,600 hp)
Career Numbers 50 001 – 50 3171 with gaps Retired 1987

TheDRB Class 50^[1] are a German class of2-10-0 "Decapod" typesteam locomotives, built from 1939 as a standard locomotive (Einheitsdampflokomotive) for haulinggoods trains. It had oneleading axle and fivecoupled axles and was one of the most successful designs produced for theDeutsche Reichsbahn.

This class was procured in Germany as part of theNazi Party's preparations for war that led to theSecond World War (1939-1945). As late as 1948, 3,164 Class 50 engines were built by many European locomotive factories – towards the war's end as "provisional war locomotives" (Übergangskriegslokomotiven) and classified as50 ÜK.

At the end of the steam locomotive era, they became virtually a universal class of mixed-traffic steam engine that, thanks to their lowaxle load, could even be employed onbranch lines with lighttrack beds. TheDeutsche Bundesbahn grouped the locomotives intoClasses 050, 051, 052 and053 from 1968 so that the numbers were computer-compatible.

Some of the class were used by the Polish State Railways as typeTy5.

In spite of wartime losses, a large number of engines still remained in 1945. No fewer than 2,159 working locomotives were taken over by theDeutsche Bundesbahn alone and, for a long time, they formed the backbone of goods traffic operations together with the largerDRG Class 44. They were also used for passenger services.

To protect the engine crew when running in reverse, the front of thetender (a 2'2' T 26) was furnished with a protective shield. On many locomotives theWagnersmoke deflectors were replaced by theWitte model after the war. On 735 of the DB machines the tender was fitted with a conductor's cab, which meant that the volume of the coal bunker had to be reduced.

1452 locomotives were included in the newDB classification scheme. That said, 88 of them were already earmarked for withdrawal. Because the class number now had to consist of 3 figures, the designations 051, 052 and 053 had to be introduced in addition to 050.

As a result, the old Class 50 was divided as shown in the table:

The last DB locomotives were retired fromDuisburg-Wedau in 1977.

Only 350 examples of Class 50 engines remained in with theDR inEast Germany after the war. Because only a small number of the numerous Class 44 fleet went to East Germany, theDRB Class 52 wasthe predominant goods train locomotive in many areas there. Of the Class 50s, 208 units were rebuilt intoClass 50.35-37 engines. The original locomotives ran mainly in the south. From the middle of the 1970s they were retired in large numbers, so that in the 1980s they were real rarities. Nevertheless, the last ones ended their active duties in 1987 together with the rebuilds (Rekoloks).

Some of the original locomotives are preserved, including 50 622 and 50 849. No. 50 622 is stabled in theNuremberg Transport Museum, where, on the evening of 17 October 2005, it was badly damaged in the great fire at the locomotive shed. The engine should however be able to be repaired with the aid of donations. No. 50 849 belongs to the Glauchau Railway Society (Eisenbahnverein Glauchau) and has a Wagner smoke deflector.

After the Second World War many examples of Class 50 engines were left in the other European states and some were used until the end of the steam traction era. For example, they were in service with thePKP (55 redesignated PKP class Ty5), theČSD (28 redesignated class 555.1), theÖBB and theDSB.

DB Class 50.40
DB 50 4023 at Spich, August 1961
Type and origin Power type Steam Rebuilder Henschel & Sohn Rebuild date 1955 Number rebuilt 31
Specifications Axle load 15.7 t (15.5 long tons; 17.3 short tons) Adhesive weight 78.4 t (77.2 long tons; 86.4 short tons) Empty weight 80.4 t (79.1 long tons; 88.6 short tons) Service weight 90.6 t (89.2 long tons; 99.9 short tons) Firebox: ​  • Grate area 3.1 m2 (33 sq ft) Boiler: ​  • Tube plates 4,700 mm (15 ft 5 in)  • Small tubes 60 mm (2+3⁄8 in), 39 off  • Large tubes 152 mm (6 in), 24 off Heating surface: ​  • Firebox 17.3 m2 (186 sq ft)  • Tubes 125.3 m2 (1,349 sq ft) *  • Flues 50.8 m2 (547 sq ft)  • Total surface 193.5 m2 (2,083 sq ft) Superheater: ​  • Heating area 48.8 m2 (525 sq ft)
Performance figures Power output 1,540 PS (1,130 kW; 1,520 hp)
Career Operators Deutsche Bundesbahn Numbers 50 4001 – 50 4031 Retired 1967
* includes 91.2 m2 (982 sq ft) in the 161-tube feedwater heater Only changes from standard version shown

Because theDeutsche Bundesbahn had sufficient goods train locomotives, they could quickly phase out theDRB Class 52 engines, so that the ageing boilers on the Class 50s could be replaced by those of the Class 52s. Even the trough tender of theKriegslokomotiven was used by the 50s amongst others. In the 1950s, several Class 50 locomotives served as trials engines. Thus 35 machines were given aboiler with mixer preheater and turbo feed pumps. Number 50 1503 was experimentally equipped with aGiesl ejector. In 1959 ten locomotives were given a boiler with smaller grate area in order to try to reduce the consumption of coal.

After experience withFranco-Crosti boilers on Class 52 locomotives (DB Class 42.90),Henschel rebuilt number 50 1412 in 1954 with such a boiler. This included a second preheater boiler underneath the actual locomotive boiler itself. After the smoke gases had flowed through the main boiler, they were turned around and passed through the preheater boiler. They escaped into the atmosphere through a side chimney along with the exhaust steam. The feed water was initially heated in a surface or mixer preheater, then in the preheater boiler before entering the main boiler. In this way the heat energy of the combustion gases could be better utilised and fuel consumption reduced. In 1958, 30 more engines were given Franco-Crosti smoke gas preheaters. These locos were redesignated as 50 4001 to 50 4031. Number 50 4011 was given oil firing. It was deployed inMünsterland and in theRhineland. The locomotives were retired by 1967.

Adolph Giesl-Gieslingen describes in his book „Anatomie der Dampflokomotive" that theSulfuric acid in the smoke condensed in the preheater and attacked theHeat exchanger. The conversion to Diesel and Electric locos led Italy and Germany both to abandon development of the Franco Crosti smoke pre-heater.

No locomotive was preserved.

DR Class 50.35
50 3648-8 in Dresden Altstadt shed
Type and origin Power type Steam Rebuild date 1957–1962 Number rebuilt 208
Specifications Axle load 15.4 t (15.2 long tons; 17.0 short tons) Adhesive weight 77.0 t (75.8 long tons; 84.9 short tons) Empty weight 78.1 t (76.9 long tons; 86.1 short tons) Service weight 88.2 t (86.8 long tons; 97.2 short tons) Firebox: ​  • Grate area 3.7 m2 (40 sq ft) Boiler: ​  • Tube plates 4,700 mm (15 ft 5 in)  • Small tubes 51 mm (2 in), 124 off  • Large tubes 133 mm (5+1⁄4 in), 38 off Heating surface: ​  • Firebox 17.9 m2 (193 sq ft)  • Tubes 84.2 m2 (906 sq ft)  • Flues 70.7 m2 (761 sq ft)  • Total surface 172.3 m2 (1,855 sq ft) Superheater: ​  • Heating area 65.4 m2 (704 sq ft)
Performance figures Indicated power 1,760 PS (1,290 kW; 1,740 hp)
Career Operators Deutsche Reichsbahn (GDR) Numbers 50 3501 – 50 3708 Retired 1989
Only changes from standard version shown

At the end of the 1930s, it was thought that a suitable boiler material had been found, in the form ofSt 47 K-Mo steel, that would allow boiler pressure to be increased to 20 bar without significantly raising the total weight of the boiler. The newly developed steel had a higher strength than the type of steel (St 34) used hitherto, but its disadvantage was that it had considerably worse conductivity. In the harsh everyday work of steam locomotives the material became very quickly fatigued, so that boilers made of the new steel had to be replaced after only a few years. The Class 50, too, was given such a boiler to begin with. Even though its condition was less critical than with other classes, it urgently needed replacing by the end of the 1950s. As a result, theDR inEast Germany had the50E replacement boiler developed on the basis of the new boilers equipping the Class23.10 / 50.40, although because thelocomotive frames were different it was given a 500 mm longer boiler barrel. This was later used on the rebuilds (the so-calledRekoloks), which saw the conversion ofClass 23 engines, as well as conversions of theClass 52s into52.80s and theClass 58s into58.30s. Between 1958 and 1962, 208 Class 50 locomotives were given such a boiler, along with a mixer preheater, a larger radiative heating area and improved suction draught, which also raised its performance. Many engines were also equipped withGiesl ejectors. TheseReko locomotives were allocated to sub-class50.35 and given operating numbers 50 3501 to 50 3708. In their last years of operation these engines often ran with the new 2'2' T 28 tenders.

The engines were soon gathered together in the railway divisions of the northwest. After the conversion of engines to oil-firedClass 50.50, the remaining coal-fired ones were concentrated in theMagdeburg division. Replacing older locomotives as well as oil-fired ones, they returned to theDresden andSchwerin divisions again by the end of the 1970s.

The last regular standard gauge steam train was hauled by a Class 50.35 locomotive. This was number 50 3559, which headed an official farewell service on 29 October 1988 on a round trip fromHalberstadt to Magdeburg,Thale and back to Halberstadt. No. 50 3559 is used in Liblar as a restaurant.

There are several Class 50.35 locomotives, several of them still working, belonging toDeutsche Bahn AG and the many museum railways and railway museums, such as numbers 50 3501, 50 3539, 50 3564, 50 3576, 50 3616, 50 3648, 50 3654, 50 3695 and 50 3708.

Between 1966 and 1971, 72Class 50.35 locomotives were converted to oil-firing. To distinguish them, they were re-designated asClass 50.50. From the introduction ofEDP numbers in 1970 they were given operating numbers 50 0001 to 50 0072. They were stationed in the Reichsbahn divisions ofSchwerin andGreifswald and used for heavy goods train duties. Their sudden withdrawal in 1981 was a political decision as a result of the cost of crude oil prices in the Eastern Bloc which had suddenly risen sharply. This meant that they could now chemically processBunker oil D; with the result that it was not longer available for locomotive firing.

In theBavarian Railway Museum (Bayerischen Eisenbahnmuseum) inNördlingen the last representative of this class, number 50 0072, is preserved.

DR Class 50.40
50 4073 in partially restored state.
Type and origin Power type Steam Builder VEB Lokomotivbau Karl Marx,Babelsberg Build date 1956–1960 Total produced 88
Specifications Wheelbase: ​  • incl. tender 18,435 mm (725+3⁄4 in) Length: ​  • Over headstocks 21,360 mm (841 in)  • Over buffers 22,600 mm (889+3⁄4 in) Height 4,550 mm (179+1⁄8 in) Axle load 14.7 t (14.5 long tons; 16.2 short tons) Adhesive weight 73.4 t (72.2 long tons; 80.9 short tons) Empty weight 77.1 t (75.9 long tons; 85.0 short tons) Service weight 85.9 t (84.5 long tons; 94.7 short tons) Tender type 2′2′ T 28 Fuel capacity 10 t (9.8 long tons; 11 short tons) Water cap. 28 m3 (6,160 imp gal; 7,400 US gal) Firebox: ​  • Grate area 3.7 m2 (40 sq ft) Boiler: ​  • Pitch 3,100 mm (122 in)  • Tube plates 4,200 mm (165+3⁄8 in)  • Small tubes 44.5 mm (1+3⁄4 in), 150 off  • Large tubes 133 mm (5+1⁄4 in), 38 off Heating surface: ​  • Firebox 17.9 m2 (193 sq ft)  • Tubes 79.0 m2 (850 sq ft)  • Flues 62.7 m2 (675 sq ft)  • Total surface 159.6 m2 (1,718 sq ft) Superheater: ​  • Heating area 68.5 m2 (737 sq ft)
Performance figures Indicated power 1,760 PS (1,290 kW; 1,740 hp)
Career Operators Deutsche Reichsbahn (GDR) Numbers 50 4001 – 50 4088 Retired 1980
Only changes from standard version shown

As well as modernpassenger train locomotives, theDR inEast Germany needed moregoods train locomotives with a 15 t axle load. As a result, a parallel development, like those of the pre-war time, was initiated for a passenger train engine, theDR Class 23.10, and a goods train engine, theDR Class 50.40, in order that many of their components could be interchangeable. The running gear conformed broadly to that of theEinheitslok, but a plate frame had to be used, because bar frames could no longer be worked. The boiler was a new build to modern construction standards with a combustion chamber and a mixer preheater. In terms of performance it was roughly comparable to the standard boiler, but was somewhat more economic in its fuel consumption. The locomotives were also given new tenders, the 2'2' T 28. The 88 engines, which were renumbered from 50 4001 to 50 4088, were delivered between 1956 and 1960. Number 50 4088 was therefore the laststandard gauge steam engine to be newly built in Germany. They were permanently stationed on the routes over the plains in the northern railway divisions. Because the plate frame soon proved to be the weakest link (with a high repair bill), the locos were taken out of traction service by 1980, but continued to be used as heating engines.

TheBavarian Railway Museum (Bayerische Eisenbahnmuseum) inNördlingen has acquired the last preserved engine of this type, number 50 4073. It is currently in theMeiningen Steam Locomotive Works at and is awaiting external refurbishment.

After theSecond World War several Class 50 locomotives were left in eastern Europe, where some of the railway administrations procured more of them. For example, the Romanian State RailwayCFR produced 282 copies of Class 50 locomotives between 1947 and 1959. 40 Romanian 150s were supplied toChina in 1958, became class DK5 in 1959 and were numbered 241–280. DK5-250 is preserved at the Shenyang Railway Museum. Some were also supplied to theKorean State Railway inNorth Korea, where they were numbered in the 150 series.

• 
  Romanian 150 class loco, DRG 50 class as copied by Resita; near Cluj-Napoca, 1972
• 
  DK5-250 at the Shenyang Railway Museum

• List of DRG locomotives and railbuses

• Ebel, Jürgen U.; Wenzel, Hansjürgen (2007).Die Baureihe 50, Bd. 1 und 2. Freiburg: EK Verlag.ISBN 978-3-88255-545-5.
• Endisch, Dirk (2007).Baureihen 50.35 und 50.50 - Die kohle- und ölgefeuerten Reko-50er der DR. Leonberg: Verlag Dirk Endisch.ISBN 978-3-936893-44-1.
• Hütter, Ingo (2012).Die Dampflokomotiven der Baureihen 50 bis 53 der DRG, DRB, DB, und DR (in German). Werl: DGEG Medien. pp. 9–154.ISBN 978-3-937189-63-5.
• Rotthowe, Ludwig (2003). "Ein letzter Versuch. Erinnerung an die 50.40 der DB".Lok Magazin.42 (260). München: GeraNova Zeitschriftenverlag GmbH:56–63.ISSN 0458-1822.
• Vetter, Klaus-J (2002).Das große Handbuch deutscher Lokomotiven. München: Bruckmann Special.ISBN 3-7654-3764-6.
• Weisbrod, Manfred; Müller, Hans; Petznik, Wolfgang (1978).Dampflokomotiven deutscher Eisenbahnen, Baureihe 41–59 (EFA 1.2) (in German) (3rd ed.). Düsseldorf: Alba. pp. 49–63.ISBN 3-87094-082-4.

Wikimedia Commons has media related toDRB Class 50.

• Photos of a typical original Class 50: 50 1002
• 50 2988

• Steam locomotives of Germany
• 2-10-0 locomotives
• Deutsche Reichsbahn-Gesellschaft locomotives
• Railway locomotives introduced in 1939
• Freight locomotives
• Passenger locomotives
• Standard-gauge locomotives of Germany
• Standard-gauge locomotives of China
• Steam locomotives of China
• Locomotives of North Korea
• 1′E h2 locomotives
• Henschel locomotives
• Borsig locomotives
• Krupp locomotives
• Krauss-Maffei locomotives
• Floridsdorf locomotives
• Berliner locomotives
• Orenstein & Koppel locomotives
• Arnold Jung locomotives
• Škoda locomotives
• Esslingen locomotives
• ČKD locomotives
• Cockerill locomotives
• Franco-Belge locomotives

• Articles with short description
• Short description matches Wikidata
• Articles needing additional references from December 2014
• All articles needing additional references
• CS1 German-language sources (de)
• Commons category link is on Wikidata