Thecord is a unit of measure ofdryvolume used to measurefirewood andpulpwood in the United States and Canada.
A cord is the amount of wood that, when "racked and well stowed" (arranged so pieces are aligned, parallel, touching, and compact), occupies a volume of 128 cubic feet (3.62 m3).[1] This corresponds to a well-stacked woodpile 4 feet (122 cm) high, 8 feet (244 cm) wide, and 4 feet (122 cm) deep; or any other arrangement of linear measurements that yields the same volume.
The namecord probably comes from the use of acord or string to measure it.[2]
Theface cord is a unit of volume for stacked firewood, 4 feet (122 cm) high, 8 feet (244 cm) wide, and 16 inches (41 cm) deep—equal to 1/3 of a cord.[3] The symbol for the unit isfc - cd.[4]
In Canada, the cord is legally defined byMeasurement Canada. The cord is one of three legal standards for the sale of firewood in Canada: stacked cubic meter (orstere), cubic foot, and cord.
In the United States, the cord is defined bystatute in most states. The U.S. National Institute of Standards and Technology Handbook 130, section 2.4.1.2,[5] defines a cord and provides uniform regulations for the sale of fireplace and stove wood. In themetric system, wood is usually measured insteres andcubic meters: 1 stere = 1 m3 ≈ 0.276 cords.
Maine appears unique among U.S. states by also defining a "loose thrown cord" or pile of cut firewood: "A cord of 12 or 16 inches (30 or 41 cm) in length shall mean the amount of wood, bark, and air contained in a space of 180 cubic feet (5.1 m3); and a cord of wood 24 inches (61 cm) in length shall mean the amount of wood, bark, and air contained in a space of 195 cubic feet (5.5 m3). [1981, c. 219 (amd).]"[6]
Other non-official terms for firewood volume includestanding cord,kitchen cord,running cord,face cord,fencing cord,country cord,long cord, andrick, all subject to local variation. These are usually taken to mean a well-stacked pile of wood in which the logs are shorter or longer than in a legal cord, to accommodate various burners. For example, a face cord commonly consists of wood that is 16 inches (41 cm) long.[7] The volume of a face cord therefore is typically 1/3 of the volume of a full cord even though it is 8 feet (244 cm) long and 4 feet (122 cm) high. A face cord is also called arick in the midwestern United States.[8]
The term is used in other English-speaking countries, such as New Zealand,[9] but may not have a legal definition.
One seasoned (dry) cord ofNorthern red oak with a heating value of 22.1 millionBritish thermal units percord (23.3 GJ/cord) has the heating equivalent of 159 U.S. gallons (132 imperial gallons; 602 liters) offuel oil with a heating value of 138,700 British thermal units per U.S. gallon (38.7 megajoules per liter).[10][11]
Untilmetrication in Australia, an imperial cord was a measurement for wood andfirewood.[12][13] The measurements for a cord of wood were 4 feet high by 8 feet wide by 4 feet deep, or usually a stack of wood containing 128 cubic feet (cu ft). The imperial cord enclosed 128 cu ft.[14][15]
Thecorde was a unit of volume used before metrication in several French-speaking countries (France, Belgium and Luxembourg). Its value varied from 2–5 steres (71–177 cu ft) depending on the region.[16][17]
{{cite book}}:ISBN / Date incompatibility (help)A standard cord is a unit of measure of wood products 4 feet (122 cm) wide, 4 feet (122 cm) high, and 8 feet (244 cm) long, or its equivalent, containing 128 cubic feet (3.6 m3) when the wood is ranked and well stowed. Any voids that will accommodate a stick, log or bolt of average dimensions to those in that pile shall be deducted from the measured volume.
{{cite book}}: CS1 maint: multiple names: authors list (link)