| Colt M1892 | |
|---|---|
 | |
| Type | Revolver |
| Place of origin | United States |
| Service history | |
| Used by | United States Army United States Navy Federal Army North-West Mounted Police British Army |
| Wars | Spanish–American War Philippine–American War Second Boer War Boxer Rebellion Mexican Revolution World War I |
| Production history | |
| Designer | Colt |
| Designed | 1892 |
| Manufacturer | Colt |
| Produced | 1892–1908[1] |
| Specifications | |
| Mass | 2.07 pounds (.94 kg) |
| Length | 11.5 inches (292 mm) |
| Barrel length | 6 inches (152 mm) |
| Cartridge | .38 Long Colt,.41 Long Colt |
| Action | Double action revolver |
| Muzzle velocity | 750 ft/s (230 m/s)[2] |
| Feed system | 6-round cylinder |
| Sights | Iron sights |
TheColtM1892Navy andArmy was the first general issue double-actionrevolver with a swing out cylinder used by theU.S. military.[3]
In 1892, therevolver was adopted by theUnited States Army chambered for.38 Long Colt cartridges, and was given the appellation "New Army and Navy". Initial experience with the gun caused officials to request some improvements. This would be an ongoing condition, resulting in Models 1892, 1894, 1896, 1901, and 1903 for the Army, as well as a Model 1895 for theNavy and aModel 1905 Marine Corps variant.[3]
The revolver featured a counter-clockwise rotating cylinder, which could be opened for loading and ejection by simply pulling back on a catch mounted on the left side of the frame behind the recoil shield. It was easily manipulated by the thumb of the right hand, and upon release the cylinder could be poked out sideways with the shooter's forefinger. Empty cases were removed by simply pushing back on an ejector rod to activate a star extractor. The six-shooter could then be quickly reloaded and the cylinder clicked back into place.[3]
Sights were the basic rounded front blade and topstrap notch. The finish on all military revolvers was blue, though civilian guns could be nickeled or with other special finishes and embellishments.[3]
The M1892's counter-clockwise cylinder rotation tended to force the cylinder out of alignment with the frame over time, and this was exacerbated by relatively weak lockwork used to "time", or match individual chambers to the barrel.[4] In 1908, Colt improved and strengthened the lockwork, and changed the cylinder rotation to a clockwise movement.
A Model 1892 revolver was recovered from theUSSMaine after it exploded in Havana Harbor in 1898. It was presented to then-Assistant Secretary of the NavyTheodore Roosevelt, who would later become President of the United States. Roosevelt brandished this pistol to rally his Rough Riders during the famed charge up San Juan Hill on July 1, 1898. This revolver was on display at Sagamore Hill and was stolen from there in 1963, recovered and then stolen again in 1990. It was recovered in 2006 and returned to Sagamore Hill on June 14, 2006.[5][6]
This revolver was thought of as a decent handgun for its time, but complaints arose from the military concerning the revolver's cartridge chambering. Beginning in 1899, combat reports arose from thePhilippines campaign regarding the poor performance of the M1892's .38-caliber ammunition. Specifically, users complained that the .38 bullet repeatedly failed to stop charging Filipino rebels at close ranges, even when hit multiple times. The complaints caused the U.S. Army to hurriedly issue stocks of old .45 caliber revolvers, and played a central role in its decision to replace the M1892 with the .45 Colt M1909New Service revolver in 1909.[7]
In the rush to furnish arms to the rapidly expanding Army and Navy after the United States enteredWorld War I, surplus stocks of these old Colts were inspected, refurbished as needed, and then issued to rear-echelon Army troops and Navy officers as a substitute standardside arm.
During its service life, the M1892 series received modifications to the basic design, including cylinder lockwork, the addition (in 1894) of an interlock between the cylinder latch and the trigger and hammer, different barrel markings, the addition of a lanyard ring in the Model 1901, and a reduction of bore diameter in the Model 1903 in an effort to increase accuracy.[3]
