 | This articlemay containexcessive orirrelevant examples. Please helpimprove the article by adding descriptive text and removingless pertinent examples.(August 2023) |
Acolor code is a system for encoding and representing non-color information withcolors to facilitate communication. This information tends to becategorical (representing unordered/qualitative categories) though may also be sequential (representing an ordered/quantitative variable).
The earliest examples of color codes in use are for long-distance communication by use of flags, as insemaphore communication.[1] TheUnited Kingdom adopted a color code scheme for such communication whereinred signifieddanger andwhite signifiedsafety, with other colors having similar assignments of meaning.
As chemistry and other technologies advanced, it became expedient to use coloration as a signal for telling apart things that would otherwise be confusingly similar, such aswiring in electrical and electronic devices, and pharmaceuticalpills.
A color code encodes a variable, which may have different representations, where the color code type should match the variable type:
The types of color code are:
When color is the only varied attribute, the color code isunidimensional. When other attributes are varied (e.g. shape, size), the code ismultidimensional, where the dimensions can beindependent (each encoding separate variables) orredundant (encoding the same variable). Partial redundancy sees one variable as a subset of another.[2] For example,playing card suits are multidimensional with color (black, red) and shape (club, diamond, heart, spade), which are partially redundant since clubs and spades are always black and diamonds and hearts are always red. Tasks using categorical color codes can be classified as identification tasks, where a single stimulus is shown and must be identified (connotatively or denotatively), versus search tasks, where a color stimulus must be found within a field of heterogenous stimuli.[3][2] Performance in these tasks is measured by speed and/or accuracy.[2]
The ideal color scheme for a categorical color code depends on whether speed or accuracy is more important.[3] Despite humans being able to distinguish 150 distinct colors along the hue dimension during comparative task, evidence supports that color schemes where colors differ only by hue (equalluminosity andcolorfulness) should have a maximum ofeight categories with optimized stimulus spacing along the hue dimension,[3] though this would not be color blind accessible. TheIALA recommends categorical color codes in seven colors: red, orange, yellow, green, blue, white and black.[4] Adding redundant coding of luminosity and colorfulness adds information and increases speed and accuracy of color decoding tasks.[3] Color codes are superior to others (encoding to letters, shape, size, etc.) in certain types of tasks. Adding color as a redundant attribute to a numeral or letter encoding in search tasks decreased time by 50–75%,[2]: Fig9 but in unidimensional identification tasks, using alphanumeric or line inclination codes caused less errors than color codes.[3][2]: 19
Several studies demonstrate a subjective preference for color codes over achromatic codes (e.g. shapes), even in studies where color coding did not increase performance over achromatic coding.[2]: 18 Subjects reported the tasks as less monotonous and less inducing of eye strain and fatigue.[2]: 18
The ability to discriminate color differences decreases rapidly as thevisual angle subtends less than 12' (0.2° or ~2 mm at a viewing distance of 50 cm),[5] so color stimulus of at least 3 mm in diameter or thickness is recommended when the color is on paper or on a screen.[6] Under normal conditions, colored backgrounds do not affect the interpretation of color codes, but chromatic (and/or low) illumination of surface color code can degrade performance.[3]
Color codes present some potential problems. On forms and signage, the use of color can distract from black and white text.[7]
Color codes are often designed without consideration for accessibility tocolor blind and blind people, and may even be inaccessible for those with normal color vision, since use of many colors to code many variables can lead to use of confusingly similar colors.[7][8] Only 15–40% of the colorblind can correctly name surface color codes with 8–10 color categories, most of which test as mildly colorblind. This finding uses ideal illumination; when dimmer illumination is used, performance drops sharply.[8]
Systems incorporating color-coding include:
Media related toColor code at Wikimedia CommonsColor topics | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Color science |
|  | ||||||||
| Color philosophy |
| |||||||||
| Color terms |
| |||||||||
| Color organizations | ||||||||||
| Names |
| |||||||||
| Related | ||||||||||
