 | This articleneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "British Rail Class 150" – news ·newspapers ·books ·scholar ·JSTOR(August 2025) (Learn how and when to remove this message) |
| British Rail Class 150 Sprinter | |
|---|---|
 London Northwestern Railway Class 150 atBedford Midland in 2025 | |
 Interior of a refurbished Northern Trains Class 150/1 | |
| In service | 5 November 1984–present[1] |
| Manufacturer | British Rail Engineering Limited |
| Orderno. |
|
| Built at | York Carriage Works |
| Family name | Sprinter |
| Replaced | |
| Constructed | 1984–1987 |
| Number built | 137 |
| Number in service | 116 |
| Number preserved | 1 |
| Number scrapped | 12 units (equivalent) |
| Successor | |
| Formation | 2 or 3 cars per unit: DMSL-DMSor DMSL-MS-DMS |
| Diagram | |
| Fleet numbers |
|
| Capacity | |
| Operators |
|
| Depots | |
| Specifications | |
| Car body construction | Steel[3] |
| Car length | |
| Width | 2.816 m (9 ft 2.9 in)[3] |
| Height | 3.774 m (12 ft 4.6 in)[3] |
| Floor height | 1.144 m (3 ft 9.0 in)[3] |
| Doors | Double-leaf pocket sliding(2 per side per car)[note 3] |
| Wheelbase | |
| Maximum speed | 75 mph (120 km/h)[3] |
| Weight |
|
| Prime mover(s) |
|
| Engine type |
|
| Displacement | Cummins: 14.0 L (855 cu in) per engine[9] |
| Power output | 213 kW (286 hp) per engine[10] |
| Transmission | |
| UIC classification |
|
| Bogies |
|
| Minimum turning radius | 70 m (230 ft)[3] |
| Braking system(s) | Electro-pneumatic (tread) ('Westcode' 3-step)[12] |
| Safety system(s) | |
| Coupling system | BSI[13] |
| Multiple working | Within class, and withClasses14x,15x,and170[13] |
| Track gauge | 1,435 mm (4 ft 8+1⁄2 in)standard gauge |
TheBritish Rail Class 150Sprinter is a class ofdiesel-hydraulic multiple unit passenger trains, developed and built byBritish Rail Engineering Limited atYork Carriage Works between 1984 and 1987 for use on regional services across Great Britain. The type is asecond-generation design, built to more modern standards and based on BR'sMark 3 body design for longer-distance services. It was developed alongside the lower-costPacers, which were built using bus parts, for use on short-distance services.[14] Two prototype units were built, followed by 135 production units in two batches. Subsequently, further members of the Sprinter family were developed and introduced to service, including theClass 155,Class 156,Class 158 andClass 159.
By the beginning of the 1980s,British Rail (BR) was operating a large fleet offirst-generation DMUs of various designs.[14] While formulating its long-term strategy for this sector of its operations, BR planners recognised that there would be considerable costs incurred by undertaking refurbishment programmes necessary for the continued use of these ageing multiple units, particularly due to the necessity of handling and removing hazardous materials such asasbestos. In light of the high costs involved in retention, planners examined the prospects for the development and introduction of a new generation of DMUs to succeed the first generation.[11]
In the concept stage, two separate approaches were devised, one involving a so-calledrailbus that prioritised the minimisation of both initial (procurement) and ongoing (maintenance and operational) costs, while the second was a more substantial DMU that could deliver better performance than the existing fleet, particularly on long-distance services.[11] The initial specification developed for the latter type was relatively ambitious for the era, calling for a maximum speed of 90 mph (140 km/h), a rate of acceleration comparable to contemporary EMUs, the ability to couple/work in multiple with existing EMUs, facilitate through-access for passengers, feature pressure ventilation, the ability to assist another failed unit, and to comprise either a three or four-car consist.[11]
This specification led to the development of the experimentalBritish Rail Class 210diesel-electric multiple unit. However, to deliver the performance specified, it was found that relatively expensive equipment had to be used, particularly to provide sufficient speed, acceleration, and through-passenger access; it also had maintainability problems due to space limitations. Despite these shortcomings, it was recognised that a production fleet that was assembled from proven components would possess both a greater reliability level and lower maintenance costs; it was forecast to achieve an availability rate of 85 percent.[11] As such, the type had sufficiently demonstrated a promising reduction in maintenance costs was achievable, especially once initial teething problems were dealt with, as well as the wider value represented by a new generation of DMUs in the reduction of ongoing costs for BR.[11]
By 1983, experience with theClass 210 had influenced planners to favour the procurement of a new generation of DMUs, but also to adopt a new set of specifications somewhat less demanding than the prior set.[11] Specifically, it was decided to lower the top speed from 90 to 75 mph (145 to 121 km/h), as testing had shown that the higher rate brought no perceptible improvement in journey times due to the typically short distances between the stations that the type was intended to serve. Furthermore, it was determined that a propulsion system delivering 7 hp (5.2 kW) per tonne would deliver sufficient acceleration.[11] The requests for compatibility with other rolling stock were eliminated, although auto-coupling and auto-connecting functionality were added. In addition to a good ride quality, the specification included a sound level of 90 dB when at full speed, an operational range of 1,000 miles (1,600 km), and an interval between major overhauls of five years or 350,000 miles (560,000 km).[11]
In comparison to the previous generation of DMUs, which typically used a pair of engines for each power car, the new generation DMU would use only a single engine per car; sufficient cooling was also provided that even with one failed engine, a two-car unit could continue to perform typical services without incurring a major performance deficit.[11] From an operational perspective, it was intended that the DMU could be assembled akin to building blocks, comprising between two and four cars that may or may not be outfitted with various passenger amenities such astoilets and luggage spaces.[11]
Initially formalised as a business specification, these requirements were transferred into a relatively broad technical specification that avoided any specifics other than those deemed essential for compatibility purposes. Thereafter, it was issued to various rolling-stock manufacturers for a competitive tender.[11] As part of this process, these manufacturers submitted bids to construct an initial series of three-car prototypes as demonstration units. A relatively constrained timetable of 18 months from the date of order to delivery of these prototypes was also specified; this has been blamed for restricting manufacturers to existing industrial practices for their submissions.[11]
In response to the specification, several submissions were received by BR. The bid submitted byBritish Rail Engineering Limited (BREL) was heavily based on its successfulClass 455 EMU, sharing its body and the majority of its running gear, albeit equipped with two different power trains. The railway engineering companyMetro-Cammell also bid, offering its own design that employedrivetted aluminium construction; this feature was credited with enabling a meaningful reduction in weight over conventional methods.[11] BR officials quickly opted to proceed with a pair of prototypes from both BREL and Metro-Cammell, issuing orders to these manufacturers thenceforth.[11]
The Class 150 is a two- or three-car commuter diesel multiple unit. The steel bodyshell is shared with theClass 455 suburban EMU, with doors at 1/3 and 2/3. With the exception of units 150001 and 150002 in their original prototype configurations, each vehicle in the unit is powered by an underframe-mounted 14.01-litre (855-cubic-inch)Cummins six-cylinderturbo-diesel engine that develops 213 kW (286 hp). The engine drives aVoith T 211 rhydrokinetic transmission that in turn drives both axles on the inner bogie via aCardan shaft andGmeinder GM 180 final drive unit.[15] The design speed is 75 mph (121 km/h). The majority of units are formed of a DMS (Driving Motor Second - numbered 57xxx) vehicle and a DMSL (Driving Motor Second Lavatory - numbered 52xxx) vehicle. Both vehicles are single class while the DMSL contains the toilet. The two prototype units were built as three-car sets with the addition of a MS (Motor Second) vehicle. In common with other non-intercity stock of the time, the trains lack air conditioning, ventilation being provided though opening hopper windows. As built, passenger seating was in a 3+2 configuration.
The second batch of production vehicles featured a new cab with gangway connection along with a revised interior.
During 1984, BREL constructed a pair of prototype three-carClass 150/0 units, numbered 150001 and 150002; the first unit was delivered to BR only 15 months following the date of order.[11] 150001 was fitted withCummins engines andVoith hydraulic transmission, and 150002 was fitted withPerkins (Rolls-Royce) engines and a fully automatic gearbox developed by theSelf-Changing Gears company.[16] Other than the power train, the two units were identical.[11]
The design specifications of the prototypes were similar to the later production units, but they were to remain as the only Class 150s to be built as three-car units. Additional three-car units were created later by re-marshalling a 150/2 car in the middle of a 150/1 set, but only the prototypes had purpose-built centre cars without driving cabs. Both cab doors are air-operated, unlike the Class 150/1 production model, but seen later on in the 150/2 variant.[citation needed]
150002 proved to be the worse of the two for reliability, and was consequently chosen for use as the testbed for theClass 158, being re-geared to a maximum speed of 90 mph (140 km/h) and fitted with Cummins engines and Voith transmission, and with a Class 158 interior. One car was fitted with the Class 151 Twin Disc 'hot-shift' transmission, which it used successfully, once the control software was sorted out. To distinguish this unit, it was reclassified as theClass 154. It has since been returned to the standard configuration and reverted to its original number. Both prototypes were still in service with London Midland until 2011. 150001 entered service with First Great Western in January 2012, with 150002 to follow after refurbishment and re-livery. 150001 & 150002 then operated for Great Western Railway. 150001 was based at Bristol'sSt. Phillips Marsh Depot, primarily working the Bristol Parkway-Weston Super Mare route. 150002 was based atExeter St. Davids Depot and mainly operated the Riviera Line alongsideClass 143 Pacers. In April 2020, both units transferred toNorthern'sNewton Heath Depot. Both units have since entered into service, initially being used mainly on the Manchester Victoria - Todmorden - Blackburn diagram, and subsequently on Rochdale - Manchester - Bolton - Clitheroe services. And now operate Huddersfield-Sheffield and Sheffield-Moorthorpe-Leeds services.
At the same time that BREL built the 150/0s,Metro-Cammell built two prototypeClass 151 units at itsWashwood Heath plant.[note 4] The two types of unit were exhaustively tested, with a view to placing further orders for the more successful. These tests revealed that the Class 150 had exceptional ride quality, as well as fully meeting the 50 percent engine-out performance requirements.[11] In the event, the two Class 150 units proved to be more reliable and, as a result, an order for 50 two-car units was placed with BREL.
| This sectionneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources in this section. Unsourced material may be challenged and removed.(August 2023) (Learn how and when to remove this message) |
.jpg)
This second batch of fifty units was classified asClass 150/1 and numbered in the range 150101-150.[17] Like the prototype units, they did not have the front-endgangway connections which allowed passengers to move between two units that were working in multiple. Originally based atDerby Etches Park depot, these units were introduced in 1985,[17] mainly concentrated aroundBirmingham andManchester, and in later years restricted mainly to commuter services.[citation needed]
The final batch of 85 two-car units was built with front-end gangway connections. These units were introduced in 1987, classified asClass 150/2 and numbered in the range 150201-285.[17] They were used on longer-distance services. The end gangways make them very similar in appearance to theClass 317/2 andClass 455/7 and 455/9 EMUs, also based on the Mark 3 bodyshell.
Some of the Class 150/2 units were later disbanded, and the vehicles were used to make some of the Birmingham and Manchester-based Class 150/1 units into three-car sets. The units in Manchester were later returned to their original configuration, but the Birmingham-based units were renumbered into the 1500xx range by subtracting 100 from the previous number (e.g. 150103 became 150003). This also gave the operational advantage of there being an extra set of passenger door controls within the train for use by theconductor, making it easier to collect revenue without having to run the full length of the unit between stations.[citation needed]
The Class 150 units have BSI couplers which enable them to work in multiple withClass 142,Class 143,Class 144,Class 153,Class 155,Class 156,Class 158, andClass 170 units, as well as with units of the same class. However, they cannot work in multiple withClass 165 orClass 166 units due to incompatible wiring arrangements.[citation needed]
When introduced, the Class 150s had unique interior door open/close buttons. In the north of England, they were square and blue. In the south of Scotland they were yellow in colour and lit up turquoise when enabled. The button lit up bright yellow in the south of England. The illumination feature was intended to aid visually impaired people, although they did not meet the subsequent standards set out bydisability regulations that were later introduced, because they had no raisedbraille and were too small for some disabled people to reasonably locate.[citation needed] During the 2000s, these blue buttons were replaced across the fleet by the standard EAO series 56 'easy to see, easy to press' raised circular door button, with braille writing for the visually impaired, over a yellow surround to comply with the Rail Vehicle Accessibility Regulations.[18]
The450 Class was built using the Class 150 bodyshell and was operated byNorthern Ireland Railways. It came to the end of itsdesign life in 2014, so most of them were scrapped, although two remained.[citation needed]
One further unit was built specifically for testing duties. Originally numbered in the Class 180 series, the unit is now in the departmentalClass 950 series, numbered 950001 and carries the yellowNetwork Rail livery.[citation needed]
The performance of the Class 150 was such that BR decided to procure similar trains for the Provincial fleet, such as theClass 156 andClass 158 for longer regional routes, replacing a significant portion of the locomotive-hauled stock previously operated by BR.[11]
After privatisation, North Western Trains (which was later taken over byFirst Group and re-brandedFirst North Western shortly afterwards) andArriva Trains Northern operated Class 150/1 and 150/2s on their routes. The North Western Trains units underwent refurbishment byHunslet-Barclay inKilmarnock. The Arriva Trains Northern trains did not. WhenNorthern Rail took over, both the former FNW and ATN Class 150s were transferred to Newton Heath depot, Manchester, with the former North Western Trains Class 158s taking the 150s' places at Northern'sNeville Hill depot (Leeds).[19] All Northern 150s contain high-density 2+3 seating. During late 2011, Northern Rail received various exLondon Midland 150/1s and 150/2s when the brand-newClass 172 units entered service in the Midlands. This enabled Northern Rail to increase capacity on its most overcrowded services.
In 2015, thethen-new Northern franchise (Northern) announced that 24 of their Class 150 units would be reformed into three-car units by March 2019. The three-car sets were to be used on routes including the Penistone Line and Leeds to Goole, though this did not end up happening.[20] The current operator,Northern Trains received the Angel Trains 150/0s, previously leased to GWR, on 1 April 2020.
It is expected that the units will continue in service with Northern until the early 2030s when they will be retired and replaced with theClass 780.[21]
AfterBritish Rail was privatised, the fleet passed toPorterbrook who leased the trains toWales & West, which was later split up intoWessex Trains andWales & Borders (laterArriva Trains Wales) in 2001.
Great Western Railway currently operates a fleet of 20 Class 150/2 units which are mainly used for services on the local branch lines in Devon. This includes theAvocet Line/Riviera Line betweenExmouth andPaignton plus theTarka Line between Barnstaple and Exeter Central (occasionally, when a Class 158, 165 or 166 isn't available). They are also used on the Cornish branch lines which includes theTamar Valley Line betweenPlymouth andGunnislake,Atlantic Coast Line betweenPar andNewquay,Looe Valley Line betweenLiskeard andLooe,Maritime Line betweenTruro andFalmouth Docks andSt Ives Bay Line betweenSt Erth andSt Ives.[citation needed]
GWR previously operated the two prototype three-car Class 150/0 units, which had transferred from London Midland and replaced theClass 165 and166Turbo units which were being used on theReading to Basingstoke Line, which allowed the Turbo units to reinforceThames Valley services.[22][23] 150001 had entered service in January 2012. The two prototype units later cascaded down to the West fleet in response to theClass 387s taking over from theClass 165s and166s on the London Paddington to Didcot Parkway services, hence releasing Turbos to take over on theReading to Basingstoke Line again. Until the end of their operation by GWR, the two 150/0s were based atSt Phillips Marsh depot inBristol and were used on local services aroundBristol andExeter. In April 2020, they transferred toNorthern Trains.[citation needed]
Following privatisation,Wales & Borders continued to use the fleet of Class 150 units on branch-line services as well as on the commuter services around Cardiff known as theValley Lines and theVale of Glamorgan Line. The units transferred toArriva Trains Wales in December 2003, with more later acquired for the reopened Ebbw Vale line. All of the ATW units were transferred toKeolisAmey Wales on 14 October 2018 and all KeolisAmey Wales units were transferred toTransport for Wales Rail on 7 February 2021.
Following privatisation ofBritish Rail, bothSilverlink andCentral Trains operated Class 150s in the midland regions of England and both companies were run byNational Express.
In 2010, London Midland orderedClass 172 replacements for its Class 150s. It initially hoped to retain some of the 150s as additional capacity, although they were also wanted byFirst Great Western andNorthern Rail.[24] London Midland was expected to lose all of its Class 150s, but a change in plan saw it retain three Class 150 units as additional capacity, following a statement from the Department for Transport on 10 August 2011. However, London Midland lost two Class 153s toFirst Great Western as a result.[24]
On 29 April 2019, the Class 150s that were still in operation withWest Midlands Trains transferred toArriva Rail North, having been replaced byClass 230s andClass 172s.[citation needed]
In July 2023, three Class 150/1s, 150137, 150139 and 150141, were transferred fromNorthern Trains toLondon Northwestern Railway for use on theMarston Vale line, after theClass 230s in use on the line were withdrawn from use in December 2022 due to maintenance concerns after the company who maintained the units,Vivarail, went into administration.[25][26] The Class 150s entered service withLNR on 20 November 2023.[27]
Upon theprivatisation of British Rail, the bus companyNational Express ranScotRail, and its successorFirst ScotRail operated 18 Class 150s out ofEdinburgh Waverley onFife Circle services. Other workings includedDundee andCarnoustie, as well as operating alongside other DMUs such as Class 158s on the services betweenNewcraighall through Edinburgh toBathgate,Stirling,Dunblane and occasionallyPerth. In 2005, 15 were transferred toArriva Trains Wales and three toNorthern Rail.[28]
Anglia Railways was created upon privatisation ofBritish Rail, and it initially inherited a small fleet of nine Class 150/2 units, later supplemented with a tenth. The units were based atCrown Point TMD, and put to use on rural services inSuffolk andNorfolk. Lines using the units included theBittern Line, theEast Suffolk Line, and theWherry Lines, as well as services fromIpswich toCambridge. One unit each weekday was sub-leased toFirst Great Eastern for use on theSudbury Branch Line.[citation needed] Anglia Railways named all bar one unit (150245) of its fleet after famous local figures. On 1 April 2004, Anglia Railways became part of the new'One' franchise. The Class 150 units were transferred toArriva Trains Wales (no. 150245) andCentral Trains (all other units), having been replaced byClass 156 units fromCentral Trains.
National Express operated the North London Railways franchise from 1997 under theSilverlink brand. They had eight Class 150s; seven were cascaded fromCentral Trains following delivery of newTurbostar units in 2000, to replace the ageing fleet ofClass 117 andClass 121 units. The eighth unit, no. 150121, was transferred to Silverlink in late 2005.[citation needed]
London Overground, which took over the North London network in 2007, inherited the eight Class 150/1 units. Six were employed on theGospel Oak to Barking line, while two were sent on long-term loan toFirst Great Western.
All units had names.[29][failed verification] The majority of the names are references to theMarston Vale Line on which they operated during Silverlink's franchise: Leslie Crabbe was a long-standing railway employee, who worked on the route; Richard Crane is the chairman of the Bletchley to Bedford Rail Users Association who has campaigned for the line to be retained and expanded.[30]
By the end of October 2010, all London Overground's Class 150/1s had been replaced by a new fleet of eight two-carClass 172 units operating exclusively on the Gospel Oak to Barking Line. Their final use was on 28 October 2010, when unit 150128 formed the 19:02 Barking to Gospel Oak service. The six units were cascaded to First Great Western, together with nine of theLondon Midland fleet.[31]
On 31 July 2025, TheWatercress Line, a heritage railway in Hampshire announced that it had been donated 150231 from Porterbrook, joining its fleet of heritage railway rolling stock.[32]
| Class | Operator | Number | Cars | Year(s) built | Unit numbers/notes |
|---|---|---|---|---|---|
| 150/0 | Northern Trains | 2 | 3 | 1984 | 150001–150002 (both these early units originally prototypes, and the only two "real" 3-car 150s[33]) |
| 6 | 1985–1987 | 150003–150008 (each unit formed by inserting a Class 150/2 vehicle between the driving vehicles of a former Class 150/1 unit).[note 5] | |||
| 150/1 | 41 | 2 | 1985–1986 | 150101–150110, 150113–150115, 150118–150131, 150133–150136, 150138, 150140, 150142–150146, 150148–150150 | |
| London Northwestern Railway | 3 | 150137, 150139, 150141 | |||
| 150/2 | Northern Trains | 25 | 1986–1987 | 150201, 150203–150206, 150210–150211, 150214–150215, 150218, 150220, 150222, 150224–150225, 150228, 150268–150277 | |
| Great Western Railway | 20 | 150202, 150207, 150216, 150219, 150221, 150232–150234, 150238–150239, 150243–150244, 150246–150249, 150261, 150263, 150265–150266 | |||
| Transport for Wales | 20 | 150208, 150241–150242, 150245, 150251–252, 150254, 150258–150260, 150262, 150264, 150267, 150278–150280, 150282–150285 | |||
| Preserved | 1 | 150231[32] | |||
| Stored | 3 | 150213, 150217, 150256–150257[36][37][38][39][40][41] | |||
| Scrapped | 12 (equiv.) | 150227, 150229, 150230, 150235–150237, 150240, 150250, 150253 150255, 150281,[1][36][40][42][43][44][45] Vehicles 52209 and 52212, from units 150209 and 150212 respectively, were scrapped after being damaged in accidents (see§ Accidents and incidents).[note 6] |
The following Class 150 units are currently or were previously named:
