Alfa Romeo 6C
1939 Alfa Romeo 6C 2500 Touring Superleggera Berlinetta
Overview
Manufacturer	Alfa Romeo
Production	1927–1954
Assembly	Italy:Portello Plant,Milan
Body and chassis
Class	Luxury car Sports car Racing car
Layout	Front-engine, rear-wheel-drive
Powertrain
Engine	Straight-six
Chronology
Predecessor	Alfa Romeo RM
Successor	Alfa Romeo 1900

TheAlfa Romeo 6C name was used on road, race, and sports cars produced between 1927 and 1954 byAlfa Romeo; the "6C" name refers to the six cylinders of the car'sstraight-six engine. Bodies for these cars were made bycoachbuilders such asJames Young,Zagato,Touring Superleggera,Castagna, andPinin Farina. Beginning in 1933 there was also a 6C version with an Alfa factory body, built inPortello. In the early 1920sVittorio Jano received a commission to create a lightweight, high performance vehicle to replace theGiuseppe Merosi designedRL andRM models. The car was introduced in April 1925 at the Salone dell' Automobile di Milano as the 6C 1500. It was based on Alfa'sP2 Grand Prix car, using a single overhead cam 1,487 cc in-line six-cylinder engine, producing 44 horsepower. In 1928 the 1500 Sport was presented, which was the first Alfa Romeo road car with double overhead camshafts.

Alfa Romeo 6C 1500
1929 6C 1500 Super Sport, 1929, in the Louwman Collection
Overview
Production	1927–1929
Powertrain
Engine	1.5 L (1,487 cc)I6 1.5 L (1,487 cc)supercharged I6
Transmission	4-speedmanual
Dimensions
Wheelbase	2,900 mm (114.2 in) 4-seater[1] 3,100 mm (122.0 in) 6-str., Normale[1] 2,920 mm (115.0 in) Sport, S.S.[2]

In the mid-1920s, Alfa'sRL was considered too large and heavy, so a new development began. The 2-litre formula that had led to Alfa Romeo winning theAutomobile World Championship in 1925, changed to 1.5-litres for the 1926 season. The 6C 1500 was introduced in 1925 at theMilan Motor Show. Series production started in 1927,^[3] with theP2 Grand Prix car as a starting point.The Alfa Romeo 6C-1500 Super Sport features a twin overhead cam six cylinder engine with a bore of 62 mm and stroke of 82 mm, giving a displacement of 1487 cc, as against the P2's 1,987 cc, whilesupercharging was dropped. First versions were bodied by James Young andCarrozzeria Touring.

In 1928, the 6C Sport model was released, with a dualoverhead-camshaft engine. Its sport version won many races, including the 1928Mille Miglia. Total production was 3,000 (200 with DOHC engines). Ten examples of a supercharged (compressore, compressor) Super Sport variant were also built.^[4]

• 
  6C 1500 James Young Drophead Coupe, 1928
• 
  6C 1500 Sport Zagato Spyder, 1928
• 
  Alfa Romeo 6C 1500 Sport,Boris Ivanowski andAttilio Marinoni, winners of the 192824 Hours of Spa.

Alfa Romeo 6C 1750
1931 6C 1750 Super Gran Sport Testa Fissa[9]
Overview
Production	1929–1933
Body and chassis
Body style	4-doorsaloon 4-doortorpedo 2-doorcabriolet 2-doorspider
Powertrain
Engine	1.7 L (1,752 cc)I6 1.7 L (1,752 cc)supercharged I6
Transmission	4-speedmanual
Dimensions
Wheelbase	3,100 mm (122.0 in) Turismo[10] 2,920 mm (115.0 in) Sport, G.T.[11] 3,160 mm (124.4 in) G.T. Compr.[12] 2,745 mm (108.1 in) S.S., G.S.[13]

The more powerful 6C 1750 (1,752 cc, 65 x 88 mm) was introduced in 1929 in Rome. The car had a top speed of 153 km/h (95 mph), a chassis designed to flex and undulate over uneven surfaces, as well as sensitive geared-up steering.^[14] It was produced in six series between 1929 and 1933. The base model had a single overhead cam. Super Sport and Gran Sport versions had a double overhead cam engine (DOHC). Again, a supercharger was available. Most of the cars were sold as rolling chassis and bodied by coachbuilders such asZagato, andTouring Superleggera. Additionally there were 3 examples built withJames Young bodywork, one of which is a part of the permanent collection at theSimeone Foundation Automotive Museum in Philadelphia, PA, USA, in original and unrestored condition.^[14]

In 1929, the 6C won every major racing event in which it was entered, including the Grands Prix of Belgium, Spain, Tunis and Monza, and theMille Miglia was won byGiuseppe Campari andGiulio Ramponi. The car also won the Brooklands Double Twelve and theUlster TT. In 1930 the car again won the Mille Miglia andSpa 24 Hours.^[15] Total production was 2,635.

• 
  6C 1750 Gran Turismo Compressore Touring Superleggera, 1931
• 
  6C 1750 Gran Turismo Compressore, 1932
• 
  6C 1750 Gran Sport Zagato
• 
  Giuseppe Campari on Alfa Romeo 6C 1750 Compressore; standing in centre (from left)Enzo Ferrari andAchille Varzi
• 
  6C 1750 Gran Sport by Castagna, 1933
• 
  Alfa Romeo 6C 1750Garavini
• 
  1930 Alfa Romeo 6C 1750 by James Young
• 
  1931 Alfa Romeo 6C 1750 GS Touring Superleggera 'Flying Star' - built specifically for the 1931 Concorso d’Eleganza Villa d’Este.
• 
  1931 6C 1750 Gran Sport with bodywork by Walter Freund.

The 1931 6C 1750 withlicense plate number "3710SV" and chassis/engine number #10814331, which is currently owned by notorious rare car collector Corrado Lopresto, is a unique example, whose story is told in Lopresto's bilingual 2015 Skira bookBest in Show – Capolavori dell'auto italiana dalla collezione Lopresto – Italian Cars Masterpieces from the Lopresto Collection.

TheEnglish-language section about this car tells:^{[excessive quote]}

Born with a spyder body by Zagato, this car is a 6C 1750 Gran Sport with Compressor, the sportiest version of the Milanese 6-cylinder, and was sold new to Giovanni Battista Aldo Barabini ofGenova in 1931.
After several changes of ownership the car goes back to Alfa Romeo, to be resold in 1933 toDino Carabba, who in 1934 enrolls in theVarese-Campo dei Fiori [rally], coming in fourth in class and eleventh overall.
In those years, the 6C probably runs in minor races, changing hands three times before being sold to the body shop Giuseppe Aprile ofSavona, in August 1938. Less than a year after, the car is purchased by Brunello Feltri ofAltare,province of Savona, but meanwhile, Aprile has completely rebuilt the body of the car with a new ["more" is written here in theItalian-language section] modern and elegant look.
The design, so well executed, indicates the work of the most famous designer of that time:Mario Revelli di Beaumont, father of this and many other beautiful bodies.
The car so transformed survivesthe war unscathed and changes ownership again in 1956, inLiguria, where it remains still today, rediscovery yet in order [sic],^[16] although with some modifications.
The painstaking restoration work has restored it to its original splendor, as well conceived by Revelli: a unique car that blends the great elegance to the sporty temperament of mechanics.

Aplush version of the car, manufactured byVitale Barberis Canonico, was also given, together with the book, to some of Lopresto's friends.

Alfa Romeo 6C 1900
6C 1900 Gran Turismo by Castagna
Overview
Production	1933
Body and chassis
Body style	4-doorsaloon 2-doorcabriolet
Powertrain
Engine	1,917 ccDOHCI6
Transmission	4-speedmanual
Dimensions
Wheelbase	2,920 mm (115.0 in)[20][21]
Kerb weight	1,250 kg (2,756 lb) saloon[20][21]

TheAlfa Romeo 6C 1900 was the final derivative of the original 6C 1500, produced in 197 examples during 1933 as a transitional model, before the new 6C 2300 was introduced the following year.^[21]Only built in Gran Turismo guise with a 2,920 mm (115.0 in) wheelbase, the 6C 1900 replaced the corresponding 6C 1750 model.^[22] Besides the larger displacement, other notable mechanical changes were aluminium cylinder heads, an improved chassis frame and a new transmission. The same upgrades were applied to the 1933 model 6C 1750 Gran Sport which, together with the 6C 1900, form the sixth series of the 6C. Alfa Romeo offered the 6C 1900 with an in-house 4-door saloon body, while bespoke coachbuilt body styles included 4-seater cabriolets.^[23]

The double overhead camshaft, naturally aspirated, straight-six engine was bored out from 66 mm (2.6 in) to 68 mm (2.7 in), bringing displacement to 1,917 cc (117.0 cu in).^[22] For the first time on a 6C thecylinder head was aluminium;^[22] some engines were also manufactured using an aluminium block with pressed-in steel sleeves in place of the usual cast iron block.^[21] With 68 hp (50 kW)at 4,500 rpm the 6C 1900 could achieve a top speed of 130 km/h (81 mph).^[21]The improved chassis frame consisted of fully boxed rails and crossmembers, instead of the 1750's C-shaped sections.^[21] A new four-speed gearbox was fitted, withsynchromesh on the two top gears and afreewheel mechanism.^[21]

Alfa Romeo 6C 2300
1938 6C 2300 B Touring Superleggera Spyder
Overview
Production	1934–1938
Powertrain
Engine	2.3 L 2,309 ccI6

The 6C 2300 (2,309 cc, 70 x 100 mm) was designed byVittorio Jano as a lower-cost alternative to the8C. In 1934 Alfa Romeo had become a state-owned enterprise. That year, a new 6C model with a newly designed and larger engine was presented. Chassis technology, however, had been taken from the predecessor.One year later a revised model, the 6C 2300 B, was presented. In this version the engine was placed in a completely redesigned chassis, with independent front suspension and rear swing axle, as well as hydraulic brakes. 760 examples of the rigid-axle 6C 2300 were produced and 870 examples of the B-model.

• 
  1934 6C 2300 Pescara
• 
  6C 2300 Touring Superleggera Spyder
• 
  1938 6C 2300 B Mille Miglia Spyder
• 
  1938 6C 2300 B Touring Superleggera Berlinetta
• 
  1935 6C 2300 Sport Touring Superleggera Pescara Spyder. Mille Miglia 1936 entrant and ex Benito Mussolini car^[29]
• 
  1937 6C 2300 B Pescara
• 
  1937 6C 2300 B Pescara Pinin Farina Berlinetta
• 
  1938 6C 2300 B Ministeriale

Alfa Romeo Aerodinamica Spyder
The Aerodinamica Spyder at the 2012Goodwood Revival
Dimensions
Wheelbase	2,800 mm (110.2 in)
Length	4,750 mm (187.0 in)
Width	1,720 mm (67.7 in)
Height	1,030 mm (40.6 in)
Kerb weight	950 kg (2,094 lb) (dry)

This sectionneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources in this section. Unsourced material may be challenged and removed.(December 2015) (Learn how and when to remove this message)

This section mayrequirecleanup to meet Wikipedia'squality standards. The specific problem is:convert to prose. Please helpimprove this section if you can.(July 2016) (Learn how and when to remove this message)

The Alfa Romeo Aerodinamica Spyder was aone-offmid-enginestreamlined prototype, built by brothers Gino and Oscar Jankovitz in connection with Alfa Romeo between 1935 and 1937 inFiume (today Rijeka), and should have been powered by an Alfa Romeo 12-cylinder engine.^[30]The construction of the car took many years, while technical changes had to be made due to the testing period from 1936 to 1937.The Aerospyder represents:

• The first “modern” mid-engined sports car design.^[31]
• The first mid-engined car with central driving position (albeit Lancia deposited a patent for a centrally driven design in 1934).^[31]
• The first car designed to take account of newly developed principles of aerodynamics, to provide low drag both externally and internally.^[31]
• The first car which was designed for high speeds, by using a body which fully enveloped the underside of the car to reduce air turbulence beneath it and an aerodynamic front design to reduce front lift of the car^[31]

Between 1935 and 1937 the Jankovits carried out the construction; a "rolling chassis" could be registered in Fiume (number plate: 2757 FM) tested, and subsequently modified.

The No.700316 6C 2300 Tipo Turismo straight-six engine placed behind the driver was Alfa Romeo: 2,309 cc, iron block, light alloy head, chain-driven dual overhead camshafts, spur gears, wet sump lubrication.The Jankovits fitted exhaust pipes of equal length and improved intake of air to reduce the pressure drop. Later the engine was upgraded with three dualWeber 36 D 04carburettors, a configuration used on the 6C 2500 SS of 1939.The transmission was the 4-speedgearbox from the 6C 2300, mounted with aHardy disc behind the engine originally fitted, which they removed. A differential unit from a Lancia Lambda was later fitted instead. A unique pre-selector gear change system was also developed. The clutch was hydraulically assisted.

Theladder chassis was made by Alfa Romeo for the central-mounted engine, with straight rails from front to the rear end of the car; it was numbered 700316 in accordance with the engine number.The final suspension wasall-independent, with "silent bloc" bushes;at the front it consisted ofdouble wishbones, with a thick sheet steel (4 mm) upper wishbone, lever-arm Houdaille shock absorber hydraulicdampers, longitudinaltorsion bars, and lower location through a transverseleaf spring; at the rear it hadswing axles andradius arms, with a transverse leaf spring and longitudinal torsion bars.

Steering was worm and sector with Hardy disc.Brakes used a two-circuit hydraulic system (two fluid distributors and two master cylinders, one for the front and one for the rear), Lockheed-type duplex brakes with 17-by-2-inch (432 mm × 51 mm) drums all round. An equaliser was fitted, which could avoid overbraking by changing the distribution of braking force between the front and rear brakes during driving.5.50–18 racing crossplytyres were mounted on Alfa Romeo 18-inch Rudge-typewire wheels.

The aerodynamic shape of the car was designed by Oscar Jankovits, probably inspired by contemporary aerodynamic theories such asPaul Jaray's, and built at the Jankovits' garage between 1935 and 1937. It was a barchetta with central driving position and fully integrated wings (pontoon styling). The bodyshell was streamlined to minimise turbulence in the air flow, fully enveloping the underbody and integrating door handles and lights.A horizontally mounted radiator made it possible to design an exceptionally low front profile for a pre-war car.Air inlets were positioned in zones of high air pressure, and hot air outlets from the engine and brakes in areas of low pressure.Top speed was in excess of 140 mph (225 km/h).

During theSecond World War the completed prototype remained hidden in the Jankovits' garage in Fiume. After the war the Jankovits, in need of money, had to sell their car to an Anglo-American officer.On Christmas Eve 1946, with a temporary registration document, Gino Jankovits drove the Aerospyder through the closed border into Italy causing a border shootout. Then the Alfa disappeared for about 30 years until it was rediscovered in England. In 1978, well-known Alfa Romeo historian Luigi Fusi put the then-owner of the car in contact with the Jankovits, and tried to buy the car for the Alfa museum. The acquisition failed, but the prototype had been painted blue, and then green as this was the original colour. The car still has its original licence plate and registration documents.

Alfa Romeo 6C 2500
6C 2500 Villa d'Este
Overview
Production	1938–1952
Powertrain
Engine	2.5 L 2,443 ccI6
Transmission	4-speedmanual
Dimensions
Wheelbase	3,250 mm (128.0 in) (Turismo) 3,000 mm (118.1 in) (Sport) 2,700 mm (106.3 in) (Super Sport)
Chronology
Successor	Alfa Romeo 1900

Introduced in 1938, the 2500 (2,443 cc) was the final 6C road car.World War II was coming and car development was stopped, but a few hundred 6C 2500s were built from 1940 to 1945. Postwar, the first new Alfa model was the 1946 6C 2500Freccia d'Oro (Golden Arrow), of which 680 were built until late 1951, with bodies by Alfa. The 2500 had an enlarged engine compared to the predecessor model; this Vittorio Jano designed dual overhead cam engine was available with either one or threeWeber carburetors. The triple carburetor version was used in the top-of-the-range SS (Super Sport) version. The 2,443 cc straight-six engine was bored out from 70 mm (2.8 in) to 72 mm (2.8 in) and was mounted onto a steel ladder frame chassis, which was offered with three wheelbases: 3,250 mm (128.0 in) on the Turismo, 3,000 mm (118.1 in) on the Sport and 2,700 mm (106.3 in) on the Super Sport. Various coachbuilders built their own bodied versions of the 2500, but most bodywork was built by Touring Superleggera of Milan.^[32]

The Tipo 256 was a racing version of 2500 made in eight examples between 1939 and 1940 for the Mille Miglia and the Le Mans 24 Hours.^[32] It was made in Spider (convertible) and Berlinetta (coupe) Touring bodystyles. With a power of 125 bhp (93 kW) it could achieve a top speed of 200 kilometres per hour (120 mph).^[33]

The car was sold to wealthy customers likeKing Farouk,Alì Khan,Rita Hayworth,Tyrone Power, andPrince Rainier. One was also featured inThe Godfather in 1972.^[34][35]

The 2500 was one of the most expensive cars available in its time.^[32] The final 6C was built in 1952 and the model was replaced by the1900.

All 6C 2500 vehicles are catalogued, together with chassis specifications, known fate, technical and race data and first owners, in theEditoriale Domus bookAlfa Romeo 6C 2500 (written by Angelo Tito Anselmi).

The 6C 2500 Freccia d'Oro (Golden Arrow) was the first postwar Alfa Romeo. 680 were built until 1951, with bodies by Alfa. The car was aBerlina bodystyle with 5–6 seats based on the 2500 Sport. It has a wheelbase of 3,000 millimetres (120 in) and it weighs 1,550 kilograms (3,420 lb).^[44] With a 4-speed manual gearbox this 90 bhp (67 kW) car could achieve a top speed of 155 kilometres per hour (96 mph).

The 6C 2500Villa d'Este was introduced in 1949 as a Berlinetta with coachwork by Touring Superleggera of Milan. The Villa d'Este used the 6C 2500 Super Sport chassis with a 110 bhp six-cylinder, 2,443 cc engine. Alfa Romeo chose the name 'Villa d’Este' after this design won the Concorso d’Eleganza,^[45] which was held at the historic resort onLake Como in northern Italy. The 'Villa d'Este' was Alfa's last handbuilt model, with only 36 examples being built (including 5 cabriolets). 6C 2500 production ended in 1952 (although a couple of racing examples were produced in 1953).

The 6C 2500 Coloniale was astaff car version of the third series 6C 2500.^[46] It was commissioned in 1938 by the Italian Ministry of Defence, for military use in theItalian colonies.^[47] Two prototypes of the 6C 2500 Coloniale were manufactured in 1939. One was shipped toItalian East Africa, where Giambattista Guidotti, winner of the 1937 Mille Miglia driving an Alfa Romeo 8C 2300 B, was instructed to conduct testing in the harsh operational conditions. The car was the first to be manufactured using technology developed by the renownedCarrozzeria Touring, the Superleggera. The car had two spare wheels, a fuel tank of 120 litres and four additional reserve tanks with a capacity of 70 litres of gasoline. In addition there was alocking differential, engaged from the dashboard by the driver. Regular production began in 1941 and the first batch of 150 vehicles was delivered between 1941 and 1942; production was then halted due towar events^[47] Total production amounted to 150 series cars plus two prototypes.

The 6C 2500 Pinin Farina was manufactured during the Second World War until 1943, when Alfa Romeo manufacture was switched to the technical needs of the army. The vehicles of the 1943 build series had only their chassis and the transmission assembled on the factory production line; the bodywork and interior build being undertaken by the Italian design studioPinin Farina.

• 
  1939 6C 2500 Cabriolet by Gebrüder Tüscher of Zurich. Chassis no: 913014
• 
  6C 2500 Super Sport Corsa, rebodied to Mille Miglia Spyder configuration by Conrad Stevenson.^[48]
• 
  1939 6C 2500 Sport Castagna Berlinetta
• 
  6C 2500 Super Sport Pinin Farina Cabriolet
• 
  6C 2500 Super Sport Pinin Farina Berlinetta
• 
  1939 6C 2500 Sport Touring Superleggera Berlinetta
• 
  1948 6C 2500 Super Sport Touring Superleggera Berlinetta
• 
  1948 6C 2500 Competizione Berlinetta (bodied in-house)
• 
  1949 6C 2500 Super Sport 'Villa d'Este' Touring Superleggera Berlinetta
• 
  1949 6C 2500 Super Sport 'Villa d'Este' Touring Superleggera Berlinetta at the 2014 Mille Miglia.
• 
  1942–1946 6C 2500 Pinin Farina Cabriolet Speciale
• 
  1947 Alfa Romeo 6C 2500 SSStabilimenti Farina Cabriolet
• 
  Rear view of the Freccia d'Oro at the Alfa Romeo museum
• 
  Rear view of the Super Sport Villa d'Este at the Alfa Romeo museum

In 1948 a firstAlfa Romeo 6C 3000 prototype was built.^[49] It was a 5–6 passenger 4-doorsaloon car of the same class as the 6C 2500, but which could be built using more modern and economical manufacturing processes.^[49]

Like its predecessor, the three-litre engine had acast ironblock, an aluminiumhead withhemispherical combustion chambers, twovalves per cylinder, angled 90° and timed by directly acting, chain drivendual overhead camshafts. Fed by a twin-chokecarburettor, it developed 120 PS (88 kW), sent to the rear wheels through a 4-speed all-synchromeshgearbox with acolumn-mounted shifter as on the 6C 2500.The car usedunit body construction, had awheelbase of 3.05 m (120 in) and adry weight of 1,400 kg.^[49] The all-independent suspension was of thedouble wishbone type withcoil springs upfront, andtrailing arm type with transversetorsion bars at the rear.^[49]

After three prototypes had been made between 1948 and 1949, the project was abandoned when market analysis and product planning suggested the development of a smaller four-cylinder car—theAlfa Romeo 1900.^[49]Despite this, the 3-litre engine was developed for competition use and gave birth to a numbersports racing cars during the first half of the 1950s: the 6C 3000 C50, 6C 3000 CM and 6C 3000 PR.

In 1950 a 6C 3000 engine from the prototypes was tuned for racing and installed in a 6C 2500 Competizione, which became the6C 3000 C50.^[50] Being based on a 6C 2500 chassis, the car had aladder frame with a 2.50 m (98 in) wheelbase, and a dry weight of 870 kg (1,918 lb).^[50] Three twin-choke carburettors and a raised compression ratio brought the output of the three-litre straight six to 168 PS (124 kW).^[50]This one-off racing car was entered at the 1950Mille Miglia with number 740, driven bySanesi and Bianchi; the car did not finish the race, as the two had to withdraw nearFerrara.^[50]

Alfa Romeo 6C 3000 CM
Alfa Romeo 6C 3000 PR

The 6C 3000 CM spider ofMuseo Storico Alfa Romeo atGoodwood Festival of Speed 2009
Constructor	Alfa Romeo
Technical specifications[53]
Chassis	Tube spaceframe withbackbone
Suspension (front)	Double wishbones,coil springs, hydraulicdampers,anti-roll bar
Suspension (rear)	De Dion tube, torque arms, coil springs, hydraulic dampers
Wheelbase	2.25 m (88.6 in) (CM) 2.20 m (86.6 in) (PR)
Engine	3,495 cc (213.3 cu in) (CM) 2,943 cc (179.6 cu in) (PR)
Transmission	5-speed,limited slip differential
Weight	960 kg (2,116.4 lb) (CM coupé) 930 kg (2,050.3 lb) (CM spider) 920 kg (2,028.3 lb) (PR)
Brakes	Hydraulic,drums, rearsinboard
Competition history

In 1952 engine parts of the 6C 3000 were used again on the6C 3000 CM—forCompetizione Maggiorata or Competition Enlarged Displacement.

The powerplant comes from a project byGiuseppe Busso. It differed from its predecessor by still using several components of the 3-litre engine from the 6C 3000 prototype, but engine capacity was increased to 3,495 cc (213.3 cu in).

The chassis was a tube frame based around a centrebackbone; suspension was bydouble wishbones andDe Dion tube at the rear.^[51] Six examples were built: four coupés and two spiders, bodied byCarrozzeria Colli.^[51][54][55]

A coupé was driven byJuan Manuel Fangio andGiulio Sala to a second overall finish at the 1953Mille Miglia.^[51][56] For the Mille Miglia the engine had been tuned to put out 275 PS (202 kW).^[51] Fangio was leading the race, but a problem with the steering forced him to slow down.Again with Fangio at the wheel, a spider won the 1stGran Premio Supercortemaggiore held inMerano in 1953.^[51]

With the end of its racing career, the 1953 Supercortemaggiore winner 6C 3000 CM spider was used by the Experimemtal Department of Alfa Romeo for testing new components. Amongst them weredisc brakes, installed in 1955, which are still present today on this vehicle,^[51] part of theMuseo Storico Alfa Romeo collection.

The ex-1953 Mille Miglia coupé was given toPinin Farina, and rebodied four times into four differentshow cars toAldo Brovarone's design:^[57]

• 1956:Alfa Romeo Superflow. Shown at the1956 Turin Motor Show, coupé body withplexiglas front wings and tail fins.
• 1956:Alfa Romeo Superflow II. Shown at the 1956Paris Motor Show, coupé body with steel wings and tail fins.
• 1959:Alfa Romeo Spider Super Sport. Shown at the1959 Geneva Motor Show,roadster body without tail fins.
• 1960:Alfa Romeo Superflow IV. Shown at the1960 Geneva Motor Show, coupé body without tail fins. The car survives today in this last configuration.

One of the two 6C 3000 CM spiders was modified to cope with the new rules of the International Sport Category, enacted in the 1954 season, which limited engine capacity to 3 litres.^[52] The 3000 CM's 3.5-litre straight-six was de-stroked to 2,943 cc.^[52] This car was renamed6C 3000 PR, forPasso Ridotto or Reduced Wheelbase, as the wheelbase was shortened by 50 cm (19.7 in).^[52][56]

The 6C 3000 PR was entered at the 2nd Gran Premio Supercortemaggiore held atMonza in 1954, driven by Sanesi; the vehicle was written off in a crash, in which Sanesi was also injured.^[52] It was resurrected from a museum in Brazil in the mid-1980s.^[58]

Wikimedia Commons has media related toAlfa Romeo 6C.

• Registro Internazionale Alfa Romeo 6C 2500
• All Alfa Romeo 6C models chronologically listed

• Alfa Romeo vehicles
• Alfa Romeo sports racing cars
• Grand Prix cars
• 1930s cars
• 1940s cars
• 1950s cars
• Cars introduced in 1925
• Cars introduced in 1929
• Cars introduced in 1933
• Cars introduced in 1934
• Cars introduced in 1938
• Rear-wheel-drive vehicles
• Sedans
• Coupés
• Roadsters
• 24 Hours of Le Mans race cars
• Mille Miglia
• Streamline Moderne cars
• Targa Florio
• Cars discontinued in 1954

• CS1 Italian-language sources (it)
• Use dmy dates from April 2018
• Articles with short description
• Short description is different from Wikidata
• Wikipedia articles with style issues from August 2018
• All articles with style issues
• Articles needing additional references from December 2015
• All articles needing additional references
• Articles needing cleanup from July 2016
• All pages needing cleanup
• Cleanup tagged articles with a reason field from July 2016
• Wikipedia pages needing cleanup from July 2016
• Commons category link is on Wikidata