 | This articleneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Aircraft fuel system" – news ·newspapers ·books ·scholar ·JSTOR(June 2010) (Learn how and when to remove this message) |
Anaircraft fuel system allows the crew topump, manage, and deliveraviation fuel to thepropulsion system andauxiliary power unit (APU) of an aircraft. Fuel systems differ greatly due to different performance of the aircraft in which they are installed. A single-engine piston aircraft has a simple fuel system, while a tanker (such as theKC-135) not only manages its own fuel but can alsoprovide fuel to other aircraft.[1]
Fuel is piped through fuel lines to a fuelcontrol valve (usually known as the fuel selector). This valve serves several functions. The first function is to act as a fuel shut-off valve. This is required to provide the crew with a means to prevent fuel reaching the engine in case of an engine fire. The second function is to allow the pilot to choose whichtank feeds the engine. Many aircraft have the left tank and right tank selections available to the pilot. SomeCessna airplanes feed only from both tanks; and many have the option to feed from left, right, or both tanks. The reason to have left only and right only options is to allow pilots to balance fuel load to reduce thebanking moment. In some aircraft, the shut-off function is a different valve located after the fuel selector valve.
Typically, after the selector valve—situated at a low point in the fuel run—there is agascolator — a fuel filter that can be opened on the ground and drained of fuel impurities denser than petroleum, mainly water and sediment. Other drainage points are in each tank (often more than one contaminant collection sump per tank) and at the injection pump.
Each tank is vented (or pressurised) to allow air into the tank to take the place of burned fuel; otherwise, the tank would be in negative pressure which would result in enginefuel starvation. A vent also allows for changes inatmospheric pressure and temperature.
The fuel level indication system in the simplest form is a transparent window on the tank side and in its usual application a float-drivenpotentiometer installed in the tank. After theTWA Flight 800 disaster, a revision was made to aircraft fuel systems to address the potential explosion hazard of electrical components located in the fuel tank. Single-engine piston aircraft fuel level systems moved to utilize float level gauges from theCNG andLPG industries which had the float drive amagnetic coupling and relocated the potentiometer outside the fuel tank.
Some single-engine aircraft usecapacitive probes in the fuel tanks. As fuel is burned, more air enters the tank and thecapacitance decreases; this is read by a computer and the fuel amount is calculated and displayed to the pilots.
Recent advances inmagnetoresistive technology have evolved new fuel level sensors for general aviation applications. This system is not affected by any additive or fuel combination to replace100LL for piston-powered aircraft.
Single-engine light aircraft fuel tanks are usually in the wings, but some aircraft have a small "header tank" between the normal fuel tank and the engine, to facilitate reliable fuel flow to the engine. On many small or very old single-engine header tanks (and even main tanks) are often mounted above and/or immediately behind the engine. A few (particularlyultralight aircraft) have them in the fuselage or on the airframe behind the pilot and/or passenger(s).[2][3][4][5][6]
Adding tanks and engines increases the complexity of the fuel system and its management. Additional features found in multi-engine aircraft are:
All of the considerations made for the twin piston are applicable to turbine fuel systems. Additional consideration apply because of the higher altitudes, different fuel, lower temperatures, and longer flights.
To avoid water condensation or the fuel itself solidifying at low temperatures (−55 °C), fuel tanks have thermometers and heating systems. Many are pressurized with enginebleed air to keep moist air out and ensure positive pressure feed to the pumps.In larger aircraft, fuel tanks also are in the fuselage and their load affects thecenter of gravity of the aircraft. This imposes limitations on the amount of fuel carried and the order in which fuel must be used.Turbine engines burn fuel faster thanreciprocating engines do. Because fuel needs to be injected in to acombustor, the injection system of a turbine aircraft must provide fuel at higher pressure and flow compared to that for a piston engine aircraft.
The refueling system of larger aircraft includes a single positive pressure refueling point from which all tanks can be fueled. How much and to which tanks fuel is fed during refueling operations is determined by the controls in the refueling panel, usually installed nearby and accessible to ground crews.
External tanks are used to extend the range of an aircraft.Drop tanks are used by combat aircraft that need to discard them after use for performance reasons. A fuel pump is required to transfer fuel from a tip tank to a main tank.