ASTM A354 is anASTM International standard that defines chemical and mechanical properties foralloy steel bolts,screws,studs, and other externally threadedfasteners. It is officially titled:Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners.^[1]

This is a standard set by the standards organizationASTM International, a voluntary standards development organizations that sets technical standards for materials, products, systems, and services.

This standard defines the properties for fasteners up to 4 inches in diameter. They are not to be used in applications where they are tensioned to more than 50% of their tensile strength. In those applications structuralheavy hex bolts are to be used, as defined byASTM A490, even though they have the same strength.^[1][2]

Head markings and mechanical properties^[3]

Head marking	Grade	Nominal size range [in]	Proof strength [ksi]	Yield strength (min) [ksi]	Tensile strength (min) [ksi]	Core hardness [Rockwell]
	Grade BC	1⁄4–2-1⁄2 (inc.)	105	109	125	C26–36
		2-1⁄2–4	95	99	115	C22–33
	Grade BD	1⁄4–2-1⁄2 (inc.)	120	130	150	C33–39
		2-1⁄2–4	105	115	140	C31–39

The standard also specifies what nuts are recommended for use with the defined fasteners. Note that nuts of a greater strength can also be used.^[1]

• ASTM standards
• Screws

• Articles with short description
• Short description matches Wikidata