 Front of locomotive at left | |||||||||||||||||||||
 TheBaltimore and Ohio Railroad's#5600George H. Emerson. | |||||||||||||||||||||
| |||||||||||||||||||||
| |||||||||||||||||||||
| |||||||||||||||||||||
A4-4-4-4steam locomotive, in theWhyte notation for describing locomotivewheel arrangements, has a four-wheelleading truck, two sets of fourdriving wheels, and a four-wheeltrailing truck. While it would be possible to make anarticulated locomotive of this arrangement, the only 4-4-4-4s ever built wereduplex locomotives—with two sets of cylinders driving two sets of driven wheels in one rigid frame, essentially a4-8-4 withdivided drive.
The first locomotive built with this arrangement was theBaltimore and Ohio Railroad's soleclass N-1 #5600George H. Emerson, constructed at the B&O's ownMount Clare Shops in May 1937. To reduce the fixed wheelbase, this locomotive had the two sets of cylinders at opposite ends, so that the rear pair were beside the firebox. The firebox was an unconventional water tube design which was tested well on other locomotives and needed a large space. The 4-4-4-4 wheel arrangement proved to be a poor design, as it restricted the firebox size and exposed the cylinders to dust and dirt, causing premature wear. The locomotive was not considered successful enough to duplicate. The sole N-1 was retired in 1943 and scrapped in 1950.[1]
The next locomotives to use the 4-4-4-4 arrangement were thePennsylvania Railroad's 52class T1 locomotives (although thesingle class S1 was originally intended to be a 4-4-4-4, it was later changed to 6-4-4-6 due to increased weight). These had the cylinders in front of the wheels they drove, so that the rear pair were between the two sets of drivers. These locomotives were impressive performers but suffered from wheelslip and severe reliability problems, and did not last long in service.[2]
The two prototypes, #6110 and #6111, were constructed at theBaldwin Locomotive Works in April 1942. The mechanical design work had been undertaken by Baldwin's chief engineer Ralph P. Johnson, while the streamlining was the handiwork of industrial designerRaymond Loewy.[2][3] Both locomotives showed fantastic performance in test trials, leading to the construction of 50 further examples. Numbers 5500 through 5524 would be constructed at the PRR'sAltoona Works while 5525 through 5549 would be constructed at Baldwin.
As operation continued, problems arose. The T1 class was known for violent uncontrollable wheel slip as well as performance and maintenance issues caused by theFranklin oscillating-camPoppet valves.[4] The PRR did show interest in trying to solve these problems such as replacing the original poppets on #5500 with easier to maintain Franklin rotary-cam poppet valves and refitting #5547 withWalschaerts valve gears reclassifying the latter engine as a "T1a".[4]
The PRR decided to stop development of the T1 class, replacing all examples by the mid-1950s with diesel units. All members of the class were scrapped. It is very likely the T1 may have had many of its shortcomings solved had the PRR not retired the short-lived class so soon.[4] During its short service life, the T1 was rumored to have operated at higher speeds than the steam speed record set by theLondon and North Eastern Railway'sMallard, but the claims could not be officially verified.[5]
Several bush tramway engine types were built with this wheel arrangement. These were known as "16-Wheelers". Two notableNew Zealand-based builders were J. Johnson and Sons Ltd. inInvercargill andA & G Price inThames.
Only one locomotive of the 4-4-4-4 arrangement is being constructed. When finished,PRR 5550 will be the 53rd and only surviving example of the PRR T1 class rather than a replica. The new build T1 is expected to implement some design improvements to help aid in solving problems encountered by the original 52. The estimated date of project completion is currently set to be around 2030.[6] As of November 2023, the project is 43.3% complete with an estimated total cost of US $7,000,000.[7]