In computing, 10-foot user interface,10-foot UI or3-meter user interface is a graphical user interface designed for televisions. Compared to desktop computer and smartphone user interfaces, it uses text and other interface elements that are much larger in order to accommodate a typical television viewing distance of 10 feet (3.0 meters). In reality, this distance varies greatly between households.[1] Additionally, the limitations of a television's remote control necessitate extra user experience considerations to minimize user effort.[2][3]
In the past, these types of human interaction design (HID) interfaces were driven by remote controllers primarily usinginfrared (IR) codes signals, which are increasingly replaced by other two-way radio-frequency protocol standards such asBluetooth while maintaining the use of IR for certain wake-up situations. The voice interfaces are also now purposed to provide a near-field experience in addition to the far-field experience of the likes ofsmart speakers. One of the requirements of voice-input 10-foot user interface usually require a device like smart speaker,over-the-top (OTT) TV box or smart television with Internet connectivity supported by an advanced software operating system.[4]
The term "10-foot" or "3-meter" is used to differentiate this user interface style from those used on desktop computers, which typically assume the user's eyes are only about two feet (24 inches, 60 cm) from the display. This difference in distance from the display has a huge impact on the interface design, requiring the use of extra large fonts on a television and allowing relatively few items to be shown on a television at once.[5][6][7] The name "10-foot user interface" is criticised for indicating a distance that is more symbolic than objective.[1] In fact, a 1920 x 1080 pixel resolution UI has a size in space that varies with the size of the TV set. This is why, in television, distance is expressed in picture heights (H) and not in metres (or feet).[8] Furthermore, this 10-foot distance does not correspond to theoptimal viewing distance or theLechner distance (3.2 H for 1080 HD resolution and 1.6 H for 4K UHD resolution). Nor does it represent the actual distance at which televisions are used.[9][1][10][11] The actual distance is greater than 10 ft in half of all households, but above all it varies greatly between households.[1] This is why, when designing an interface for the TV set, it’s important to position oneself at various distances to see what different parts of the population will actually see.[1]
A 10-foot UI is almost always designed to be operated by a simple hand-held remote control. Rather than themouse ortouchscreen which are commonly used with other types of user interfaces, the remote'sdirectional pad is the primary means of navigation. This means that a 10-foot UI needs to arrange items on screen in a way that clearly shows which item would be next in each of the four directions of the directional pad – usually a grid layout. Also, without a mouse cursor, the currently-selected item must be highlighted in some way.[citation needed]
Ten-foot interfaces may resemble otherpost-WIMP systems graphically, but do not assume the use of atouch screen.[12][13]
The goal of 10-foot user interface design is normally to make the user's interaction as simple and efficient as possible, trying to achieve a more laid-back and relaxed user experience with as few button presses as possible while still having an intuitive layout, in terms of accomplishing user goals—what is often calleduser-centered design. Good user interface design facilitates finishing the task at hand without drawing unnecessary attention to itself.Graphic design may be utilized to support itsusability; however, the design process must balance technical functionality and visual elements (e.g.,mental model) to create a system that is not only operational but also usable and adaptable to changing user needs.[6][14]
One of the additional feature in 10-foot user interface design is also to repurpose theon screen display (OSD) for providing a clear menu-driven interaction for users.[15] This complements the navigation available in most handheld remote controllers. The rise of the use of voice-based input (as found in some remote controllers andsmart speakers) also provides a direct control interface enhancing the user experience.[16][17]