This article includes alist of references,related reading, orexternal links,but its sources remain unclear because it lacksinline citations. Please helpimprove this article byintroducing more precise citations.(December 2007) (Learn how and when to remove this message) |
| .577 Snider | ||||||||
|---|---|---|---|---|---|---|---|---|
(From Left to Right): A .577 Snider cartridge, aZulu War–era rolled brass foil.577/450 Martini–Henry Cartridge, a later drawn brass .577/450 Martini–Henry cartridge, and a .303 British Mk VII SAA Ball cartridge | ||||||||
| Type | Military | |||||||
| Place of origin | Britain | |||||||
| Service history | ||||||||
| Used by | British | |||||||
| Production history | ||||||||
| Produced | 1867 | |||||||
| Specifications | ||||||||
| Case type | Rimmed, straight | |||||||
| Bullet diameter | .570 in (14.5 mm) | |||||||
| Neck diameter | .602 in (15.3 mm) | |||||||
| Base diameter | .660 in (16.8 mm) | |||||||
| Rim diameter | .747 in (19.0 mm) | |||||||
| Rim thickness | .065 in (1.7 mm) | |||||||
| Case length | 2.0 in (51 mm) | |||||||
| Overall length | 2.45 in (62 mm) | |||||||
| Ballistic performance | ||||||||
| ||||||||
| Sources:The Handloader's Manual of Cartridge Conversions, by John J. Donnelly, Stoeger Publishing, 1987,ISBN 978-0-88317-269-8. p. 686. | ||||||||
The.577 Snider (14.7×51mm)[1]cartridge was a Britishblack powder metalliccentrefire cartridge, which fired a 0.577-inch (14.7 mm), 480-grain (31 g) lead projectile, primarily used in theSnider–Enfield rifle.
Early .577 Snider cartridges were made from a composite design using paper and brass foil with a stamped metallic base and primer, much like the first generation ofMartini-Henry cartridges. Later cartridges (after the design had been proved with the Martini-Henry cartridges) were made from drawn brass, much like modernsmall arms ammunition. The .577 Snider cartridge was eventually replaced in service by the.577/450 Martini–Henry cartridge in the 1870s. The .577 Snider cartridge is considered by most commentators to beobsolete, with large scale commercial production having ceased in the 1930s.
New brass can be formed from a 24 gauge hull and reloading dies are available from Lee. As of 2015,KynamcoKynoch in the United Kingdom andBertram in Australia are also producing ready-made brass.[citation needed]
Thisammunition-related article is astub. You can help Wikipedia byexpanding it. |
ThisUnited Kingdom military article is astub. You can help Wikipedia byexpanding it. |