| Development | |
|---|---|
| Designer | Gary Mull |
| Location | United States |
| Year | 1986 |
| No. built | 40 |
| Builder | Sonata Yachts |
| Name | Sonata 6.7 |
| Boat | |
| Displacement | 2,544 lb (1,154 kg) |
| Draft | 4.92 ft (1.50 m) |
| Hull | |
| Type | Monohull |
| Construction | Fiberglass |
| LOA | 21.98 ft (6.70 m) |
| LWL | 19.36 ft (5.90 m) |
| Beam | 8.20 ft (2.50 m) |
| Hull appendages | |
| Keel/board type | fin keel |
| Ballast | 952 lb (432 kg) |
| Rudder | internally-mounted spade-typerudder |
| Rig | |
| General | Fractional riggedsloop |
| I foretriangle height | 24.74 ft (7.54 m) |
| J foretriangle base | 7.74 ft (2.36 m) |
| P mainsail luff | 27.10 ft (8.26 m) |
| E mainsail foot | 9.48 ft (2.89 m) |
| Sails | |
| Mainsail area | 128.45 sq ft (11.933 m2) |
| Jib/genoa area | 95.74 sq ft (8.895 m2) |
| Total sail area | 224.20 sq ft (20.829 m2) |
TheSonata 6.7 is atrailerablesailboat, that was designed byAmericanGary Mull and first built in 1986. The design is out of production.[1][2][3][4]
The boat was built bySonata Yachts inAustralia, which completed 40 examples starting in 1986.[1][4]
The Sonata 6.7 is a small recreationalkeelboat, built predominantly offiberglass. It has afractionalsloop rig, an internally-mounted spade-typerudder and a fixed finkeel. It displaces 2,544 lb (1,154 kg) and carries 952 lb (432 kg) of ballast.[1][4]
The boat has a draft of 4.92 ft (1.50 m) with the standard keel. There was a lifting keel version produced as well.[1][4]
The design has ahull speed of 5.9 kn (10.9 km/h).[4]