Smart antennas (also known as adaptive array antennas,digital antenna arrays, multiple antennas and, recently,MIMO) areantenna arrays with smartsignal processingalgorithms used to identify spatial signal signatures such as thedirection of arrival (DOA) of the signal, and use them to calculatebeamforming vectors which are used to track and locate the antenna beam on the mobile/target. Smart antennas should not be confused withreconfigurable antennas, which have similar capabilities but are single element antennas and not antenna arrays.
Smart antenna techniques are used notably in acoustic signal processing, track and scanradar,radio astronomy andradio telescopes, and mostly incellular systems likeW-CDMA,UMTS, andLTE and 5G-NR.[1]
Smart antennas have many functions: DOA estimation,beamforming, interference nulling, and constant modulus preservation.
The smart antenna system estimates the direction of arrival of the signal, using techniques such asMUSIC (MUltiple SIgnal Classification),estimation of signal parameters via rotational invariance techniques (ESPRIT) algorithms,Matrix Pencil method or one of their derivatives. They involve finding a spatial spectrum of the antenna/sensor array, and calculating the DOA from the peaks of this spectrum. These calculations are computationally intensive.
Matrix Pencil is very efficient in case of real time systems, and under the correlated sources.
Beamforming is the method used to create theradiation pattern of the antenna array by adding constructively the phases of the signals in the direction of the targets/mobiles desired, and nulling the pattern of the targets/mobiles that are undesired/interfering targets.This can be done with a simpleFinite Impulse Response (FIR) tapped delay line filter. The weights of the FIR filter may also be changed adaptively, and used to provide optimal beamforming, in the sense that it reduces theMinimum Mean Square Error between the desired and actual beampattern formed. Typical algorithms are thesteepest descent, andLeast Mean Squares algorithms. In digital antenna arrays with multi channels, use the digital beamforming, usually by DFT orFFT.
Two of the main types of smart antennas include switched beam smart antennas and adaptive array smart antennas. Switched beam systems have several available fixed beam patterns. A decision is made as to which beam to access, at any given point in time, based upon the requirements of the system. Adaptive arrays allow the antenna to steer the beam to any direction of interest while simultaneously nulling interfering signals.[2] Beamdirection can be estimated using the so-called direction-of-arrival (DOA) estimation methods.[3]
In 2008, the United StatesNTIA began a major effort to assist consumers in the purchase ofdigital television converter boxes.[4] Through this effort, many people have been exposed to the concept of smart antennas for the first time. In the context of consumer electronics, a "smart antenna" is one that conforms to the EIA/CEA-909 Standard Interface.
In 2017, the Israeli Aerospace Industries unveiled an adaptive array antenna calledADA, and stated that it is already operational and shall be fitted onto "major platforms" used by theIsrael Defense Forces.
 | This article or sectionmay need to be rewritten to comply with Wikipedia'squality standards, as Outdated, many more smart antennas are available in the market. Relevant discussion may be found on thetalk page.You can help. The talk page may contain suggestions.(July 2018) |
Prior to the final transition to ATSCdigital television in the United States on 11 June 2009, two smart antenna models were brought to market:
And two models are causing consumer confusion: