Aleachate is any liquid that, in the course of passing through matter, extractssoluble orsuspended solids, or any other component of the material through which it has passed.
Leachate is a widely used term in theenvironmental sciences where it has the specific meaning of a liquid that has dissolved or entrained environmentally harmful substances that may then enter the environment. It is most commonly used in the context of land-filling ofdecomposable or industrial waste.
In the narrow environmental context leachate is therefore any liquid material that drains from land or stockpiled material and contains significantly elevated concentrations of undesirable material derived from the material that it has passed through.
Leachate from alandfill varies widely in composition depending on the age of the landfill and the type ofwaste that it contains.[1][2] It usually contains both dissolved and suspended material. The generation of leachate is caused principally byprecipitation percolating through waste deposited in a landfill. Once in contact with decomposing solid waste, the percolating water becomes contaminated, and if it then flows out of the waste material it is termed leachate.[3] Additional leachate volume is produced during this decomposition ofcarbonaceous material producing a wide range of other materials includingmethane,carbon dioxide and a complex mixture oforganic acids,aldehydes,alcohols and simple sugars.
The risks of leachate generation can be mitigated by properly designed and engineered landfill sites, such as those that are constructed on geologically impermeable materials or sites that use impermeable liners made ofgeomembranes or engineeredclay. The use of linings is now mandatory within theUnited States,Australia and theEuropean Union except where the waste is deemed inert. In addition, most toxic and difficult materials are now specifically excluded from landfilling. However, despite much stricter statutory controls, leachates from modern sites are often found to contain a range of contaminants stemming from illegal activity or legally discarded household and domestic products.
In a 2012 survey performed in New York State, all surveyed double-lined landfill cells had leakage rates of less than 500 liters per hectare per day. Average leakage rates were much lower than for landfills built according to older standards before 1992.[4]
Heap leaching is an industrialmining process used to extractprecious metals,copper,uranium, and other compounds fromore using a series of chemical reactions that absorb specific minerals and re-separate them after their division from other earth materials. While similar toin situ mining, heap leach mining differs in that it places ore on a liner, then adds the chemicals via drip systems to the ore, whereasin situ mining lacks these liners and pulls pregnant solution up to obtain the minerals. Heap leaching is widely used in modern large-scale mining operations as it produces the desired concentrates at a lower cost compared to conventional processing methods such as flotation, agitation, and vat leaching.[5]
Additionally, dump leaching is an essential part of most coppermining operations and determines the quality grade of the produced material along with other factors
Due to the profitability that the dump leaching has on the mining process, i.e. it can contribute substantially to theeconomic viability of the mining process, it is advantageous to include the results of the leaching operation in the economic overall project evaluation.[6]
The process has ancient origins; one of the classical methods for the manufacture ofcopperas (iron sulfate) was to heap upiron pyrite and collect the leachate from the heap, which was then boiled with iron to produceiron(II) sulfate.[7]
In-situ leaching (ISL), also called in-situ recovery (ISR) or solution mining, is amining process used to recover minerals such ascopper anduranium through boreholes drilled into a deposit,in situ. In-situ leach works by artificiallydissolving minerals occurring naturally in thesolid state.
The process initially involves the drilling ofboreholes into theore deposit. Explosive orhydraulic fracturing can be used to create open pathways in the deposit for the solution to penetrate. Leaching solution is pumped into the deposit where it comes in contact with the ore. The solution bearing the dissolved ore content is then pumped to the surface and processed. This process allows the extraction of metals and salts from anore body without the need for conventional mining involvingdrill-and-blast,open-cut orunderground mining.
Leachate can also be produced from land that was contaminated by chemicals or toxic materials used in industrial activities such asfactories,mines or storage sites.
Composting sites in areas and/or times of high rainfall also produce leachate. Due to the makeup of compost, which often consists of materials that degrade relatively easily compared to the makeup other waste collection sites, prolonged moisture exposure and occurrence ofanaerobic digestion, which can occur due to the collapse of compost piles. The critical portion then involves exposure to precipitation, which causes the decomposed matter to flow, becoming runoff and therefore leachate.[8]
Leachate is associated with stockpiledcoal and with waste materials from metal oremining and other rock extraction processes, especially those in which sulfide containing materials are exposed to air producingsulfuric acid, often with elevated metal concentrations.
In the context of civil engineering (more specifically reinforced concrete design), leachate refers to the effluent of pavement wash-off (that may include melting snow and ice with salt) that permeates through the cement paste onto the surface of the steel reinforcement, thereby catalyzing its oxidation anddegradation. Leachates can begenotoxic in nature.[9]
A possible risk for the aquatic environment due to the occurrence of organic micropollutants in raw or treated landfill leachates has also been reported in recent studies.[10]
| International | |
|---|---|
| National | |
| Other | |
