| Holden Commodore (VZ) | |
|---|---|
_Acclaim_station_wagon_(2015-07-03)_01.jpg) 2006 Holden Commodore (VZ) Acclaim Wagon | |
| Overview | |
| Manufacturer | Holden (General Motors) |
| Also called | Holden Adventra (VZ) Holden Berlina (VZ) Holden Calais (VZ) Holden Crewman (VZ) Holden Monaro (VZ) Holden One Tonner (VZ) Holden Ute (VZ) Chevrolet Lumina Chevrolet Omega |
| Production | August 2004 – July 2006 (sedan) August 2004 – August 2007 (wagon, utility) |
| Assembly | Australia:Adelaide, South Australia (Elizabeth) |
| Designer | Mike Simcoe |
| Body and chassis | |
| Class | Full-size |
| Body style | 4-doorsedan 4-doorstation wagon 2-doorcoupe utility |
| Layout | Front-engine, rear-wheel-drive |
| Platform | GM V platform |
| Related | Opel Omega B Cadillac Catera Holden Statesman/Caprice (WL) Holden One Tonner (VY) Holden Monaro (VZ) HSV Z Series |
| Powertrain | |
| Engine | |
| Transmission |
|
| Dimensions | |
| Wheelbase | 2,788 mm (109.8 in) (sedan) 2,938 mm (115.7 in) (wagon, utility) |
| Length | 4,876–5,033 mm (192.0–198.1 in) |
| Width | 1,842–1,847 mm (72.5–72.7 in) |
| Height | 1,440–1,527 mm (56.7–60.1 in) |
| Curb weight | 1,569–1,654 kg (3,459–3,646 lb) |
| Chronology | |
| Predecessor | Holden Commodore (VY) |
| Successor | Holden Commodore (VE) Holden Commodore Calais Tourer (ZB) (for Adventra) |
TheHolden Commodore (VZ) is afull-size car that was produced byHolden from 2004 to 2006 as a sedan and to 2007 as a wagon andUte sold alongside the newVE series. It was the fourth and final iteration of the third generation of theCommodore and the last to spawn acoupé variant. Its range continued to include the luxury variants,Holden Berlina (VZ) andHolden Calais (VZ).
_Acclaim_station_wagon_(2015-07-03)_02.jpg)
_Executive_station_wagon_02.jpg)
Released in August 2004, the VZ series was a minor facelift of the previousVY series that featured a new V6 engine in different tune guises. The powerplants included 175 and 190 kW (235 and 255 hp), 3.6-litreAlloytecV6 engines in place of the older 3.8-litreEcotec V6. Other changes to the V6 was the loss of the supercharger that was included in the S models from the VT to VY, this was also dropped with the 3.8-litre and would not be used with the new 3.6. These newAlloytecDOHC engines have carried on through to theHolden Commodore (VE) which was released in July 2006. A new5L40-E 5-speedautomatic transmission was introduced on the sports and luxury V6 variants.
The advanced 3.6-litre Alloytec engines were more powerful, responsive and fuel-efficient than the outgoingEcotec V6. To achieve 190 kW (255 hp), theAlloytec V6 gains variable valve timing on both inlet and exhaust sides as well as a dual stage intake manifold, while the 175 kW (235 hp) version retains variable valve timing on the inlet side only. Selected models bring advanced active safety features that electronically assist the driver to maintain vehicle control in emergency situations.
The VZ Commodore was available in several model variations, most of which carried over from the VY range, with the exception of the newly introduced SV6, a specification level that replaced the S range. All models in the Commodore range (Executive, Acclaim, Berlina, Calais, SV6, SV8 and SS) were available as sedans, while wagon variants of the Executive, Acclaim and Berlina were available. Berlina and Calais models were not badged or marketed as Commodores. The VZ was the last Commodore line-up to use the Executive and Acclaim nameplates.
The VZ is notable for being the only Commodore series of recent times to not officially introduce a Series II update to the range, however, a number of mechanical changes were made in January 2006, designated MY06. Holden introduced the newL76 6.0-litre V8 to its range. The V8 has been slightly detuned, and bothDisplacement on Demand and variablevalve timing have been removed. The base V6 also went from 175 to 172 kW (235 to 231 hp) and theHigh Output V6 went from 340 to 335 N⋅m (251 to 247 lb⋅ft) at the same time, to meet new ADR 79/01 (Euro III) emissions standards effective from 1 January 2006.
Sales of the VZ series failed to match those of the preceding VY in light of rising small car sales, higher fuel prices and growing interest in the whole new replacement, the VE series.
The VZ Commodore sedans were superseded by the VE series on 10 July 2006,[1] whilst the wagon and utility ranges lived on for almost another year. VZ Ute production ended in August 2007, whilst the last wagon rolled off Holden's Elizabeth plant line on 6 September 2007.[2]
 | This sectionis inlist format but may read better asprose. You can help byconverting this section, if appropriate.Editing help is available.(January 2019) |
The Executive was the baseline model. The VZ series was the last one to include this nameplate, which was first introduced in 1984.
_Acclaim_sedan_(2018-08-31)_01.jpg)
_Acclaim_sedan_(2018-08-31)_02.jpg)
The Acclaim sat above the Executive in the specification level hierarchy of the VZ range. The VZ series was the last one to include this nameplate, which was first introduced in 1993.
_SV6_sedan_(2015-08-07)_02.jpg)
The SV6 was the baseline sports variant, replacing the S model that was last seen in theVY Commodore. Similar to theVK Commodore andVL Commodore, the VZ Commodore did not offer a manual transmission option on the Executive model. Buyers now had to choose the new SV6 as the cheapest manual variant.
The SV6 features included:
The SV8 was the mid-range sports variant. Early VZ versions of the SV8 continued with the VY SV8 theme, being essentially an Executive with a V8 engine, rear spoiler, unique 17 inch alloy wheels and SV6 tail lights. This specification was later upgraded as a running change to match the equipment levels and appearance of the SV6, which remained a step down from the SS.
SV8 features included:
_SS_sedan_(25906284152).jpg)
_SS_sedan_(25394295734).jpg)
The SS was the flagship sports variant of the VZ range.
SS included such features as:
_sedan_(2016-01-04)_01.jpg)
_sedan_(2016-01-04)_02.jpg)
The Berlina was the semi-luxury model of the VZ range, it sat above the Acclaim and below the Calais.
The Berlina features included:
_sedan_(2016-01-04)_01.jpg)
_sedan_(2016-01-04)_02.jpg)
| Colour range (expands) |
|---|
| Heron White (white) |
| Quicksilver (silver) |
| Glaze (silver with blue highlights – 2005–2006) |
| Odyssey (grey with blue pearl highlights) |
| Phantom (black with silver highlights) |
| Redhot (red) |
| Shanghai (metallic light burgundy) |
| Devil (yellow – 2006, Utes only) |
| Martini (metallic olive – 2004–2006) |
| Barbados (light blue with turquoise highlights – 2004–2005) |
| Turismo (light blue-aqua – 2005–2006) |
| Impulse (vivid blue) |
| Vespers (dark royal blue) |
| Nickel (replacing Quicksilver – Aug 2006–2007) |
| Evoke (Aug 2006–2007) |
| Sandstorm (Aug 2006–2007) |
| Ignition (orange replacing Devil – Aug 2006–2007) |
| Provence (Aug 2006–2007) |
The Calais was the top-of-the-line, luxury model in the VZ range. It sat above the Berlina and combined luxury with performance.
The Calais features included:
The Holden Adventra (VZ) is anall-wheel drive wagon update to the originalVY II series model.
An interim VZ Adventra appeared in August 2004 at the time of the release of the VZ Commodore range, but this was in essence the familiar VY body with VZ engine, running gear, ECU and a VZ compliance plate. A true VZ series facelift was introduced in February 2005 and with it, the introduction of a V6 engine as the principal power unit. Adventra was now available in a choice of four equipment levels: SX6, CX6, LX6, CX8, and LX8, with a 3.6-litreV6 engine affording 190 kW (255 hp) and a five-speed automatic transmission. The V8 engine from the VY iteration was uprated to 250 kW (335 hp), although, only available in the CX8 and the premium LX8 model. Production of the V8-powered Adventra ceased in December 2005, due only to the fact that Holden ceased manufacturing the Generation III power unit and did not see a strong enough business case to invest in the new 6.0-litreGeneration IV V8 for the Adventra's all-wheel drive application.
Sales of the Adventra range never achieved Holden's expectations, especially in comparison to the rivalFord Territory, and it was ultimately phased out of production in 2006 to make way for the newly introducedCaptiva, imported fromGM Daewoo inSouth Korea.[7]
_LX6_station_wagon_(26598734002).jpg)
_SX6_station_wagon_(17005955370).jpg)
.jpg)
The Commodore9C1, or 'Police Pack', was a special pack for the VZ Commodore that was available to all police organisations in Australia, New Zealand and several in the Middle East. It was based on the Commodore Executive with various added specification upgrades to cater for its specific role. Most 9C1s were delivered in white, though unmarked vehicles were offered in other colours.
Specification upgrades included:
The Commodore Lumina was launched in January 2005. It was based on the Commodore Executive. 3,700 were produced.
April 2005 saw the launch of the Commodore Equipe, a Holden tradition for many recent models of the Commodore. Based on the VZ Acclaim. 3,500 were produced.
_Equipe_sedan_(2009-01-01)_02.jpg)
In March 2006, Holden produced the limited edition SVZ model. This was based on the Executive sedan and wagon model.
In March 2007, this model was reintroduced as a run-out model, based on the Executive wagon and base model Ute. The SVZ ute could be ordered in Morpheous (Metallic purple with pink highlights from the VE series). The SVZ wagon included the Police 193 kW engine in place of the standard 175 kW (235 hp) engine, as well as leather upholstery and sports additions (instrument cluster, leather gearshift and steering wheel).
.jpg)
_SVZ_sedan_(2015-10-24).jpg)
Late in 2005, Holden released 930 units of the limited edition Commodore SSZ. This model featured leather upholstery with SSZ logo, premium performance brakes, colour-coded SSZ instrument cluster, black centre-mounted voltage and oil pressure gauges, 18-inchMonaro-style wheels, Rear Parking Assist andBluetooth. The SSZ was discontinued upon arrival of the VE series.
_S_utility_(2015-07-03)_02.jpg)
Whilst the sedan VZ range received both versions of theAlloytec V6, theUte andCrewman range received just the lower-capacity small 3.6L V6-Alloytec 175 – it was the standard base engine across the entire ute & Crewman range, with a six-speed manual. A 4-speed automatic was also available as an option, however. Crewman vehicles were factory speed limited to 160 km/h due to the long length of driveshaft. The Crewman also suffered a larger turning circle and heavier fuel consumption than the ute, due to the longer, heavier wheelbase chassis. TheOne Tonner andCrewman ranges shared the same base specification models, as shown below:
TheS specification was rebranded as SV6 in August 2006, and the five-speed auto from the sedan became available, with no other changes.
The V8 SS received a power increase to 235 kW (315 hp).
Based on Commodore SS specification (minus side-impact airbags on cab-chassis). Available with a 5.7-litre 235 kW (315 hp)Gen III V8, or the new 260 kW (349 hp) 6.0-litreL98 – six-speed manual or four-speed auto.
TheCrewman was also available in a higher spec Cross 8 form, whilst the VZ CrewmanCross 6 was essentially a lower powered, base model V6 version of the Cross 8.
TheOne Tonner was available with the following specifications:
To make room in the factory for the upcoming VE series, production of the One Tonner ceased in December 2005.
The Ute range continued without any updates for the next 18 months, until the January 2006 addition of Holden's newL76 V8 engines. The VZ Utes remained on sale well after the introduction of Holden's next-generation VE series, as did the VZ Wagons. By December of the same year, the Crewman and all AWD variants of the ute were gone from showrooms after Holden ceased production, and the One Tonner range was discontinued. VZ Utes were superseded by the VE series equivalent released in September 2007. Citing poor Crewman sales & uptake by consumers, Holden chose not to manufacture any long wheelbase "Crewman" crew cab VE ute models in the new VE series.
The enhanced performance VZ range sold by Holden Special Vehicles (HSV) was released in 2004 as theZ Series. Its standard range included the models listed below.
_HRT_Edition.jpg)
The Clubsport was powered by the LS2 engine a 6.0 L, 16-valve pushrod V8 producing 297 kW (404 PS; 398 hp) at 6000 rpm and 510 N⋅m (376 lb⋅ft) at and 4400 rpm. There was the choice of either a Six-speed manual or four-speed auto. Fuel consumption was 15.9 L/100 km. A Clubsport R8 was also available, with greater equipment (e.g. leather seats and extra instrument gauges) and revised wheels design and upgraded braking system.
In July 2005, HSV also produced a manual-onlyClubsport and Clubsport R8 "Dealer Team Spec" (DTS), comprising Stage 1 and optional Stage 2 packages. Stage 1 included upgraded tyre and wheel package, lighter overall weight and Stage 2 included other upgrades such as enhanced driver interface, adjustable suspension and tyre pressure monitors.[8][9]
The Z Series was the first range with which HSV reached the Middle East with the one-make racing ClubSport R sedans.[10][11]
_sedan_01.jpg)
_sedan_02.jpg)
The Z Series no longer featured the Senator Signature nameplate. The new Senator featured a more subtle styling, with 19 in (482.6 mm) wheels as standard. The engine was a new 6.0-litreLS2 V8 (as featured on theC6 Corvette) pushing out 297 kW (398 hp). Newly designed rear mufflers give the car a slightly deeper sound. The Senator's weight increased to 1,835 kg (4,045 lb), 0–100 km/h (0–62 mph) takes 6.4 seconds and has a top speed of 240 km/h (149 mph) (limited). The fuel economy was officially rated at 10–12 litres/100 km on the highway, and a jump to 18–22 litres/100 km through the cities.
Dimensions were 1,450 mm (57.1 in) height, 4,984 mm (196.2 in) length, 1,842 mm (72.5 in) width and the wheelbase is 2,788 mm (109.8 in).
Some of the main options included the sunroof, satellite navigation, rear-seat DVD players, Xenon headlights, tyre pressure monitoring system. Inside it features Nappa leather on the seats. The braking system on the Senator comes withABS with twin-piston front callipers and grooved discs. The specially designed rear suspension has a self-levelling feature, so if the Senator was towing a trailer, instead of the weight forcing the back down and causing the front of the car to go up, the rear suspension would harden itself and therefore keeping the car levelled for headlight aim. This feature is also on the current E-series Senator Signature and has been optioned on Holden models as far back as WH Caprice in 1999.
The chrome outline on the grill was added to give the style more of a relaxed luxury appearance. The Senator has specially designed 10 spoke alloys. For the interior special suede leather come as an optional extra. The Senator Signature name has now been dropped out of the line up, in the price department it matches the Clubsport approximately. Nappa leather is standard for the Senator. The 6.0-litre Gen3 (LS2) V8 engine was similar to the C6 Corvettes engine. The brakes are upgraded and feature Bosch ABS.[12]
The Avalanche was anall-wheel drivecrossover SUV that was manufactured byHolden Special Vehicles (HSV) in 2005. Based on the Holden Adventra LX8 crossover wagon, the Avalanche range also incorporated a dual-cabutility model known as the HSV Avalanche XUV. The XUV derived from the Holden Crewman Cross8.
.jpg)
Both HSV vehicles were built in two series, the 2003 "Y Series II" (the wagon was actually available as of October/November 2003) and an updated version of the "Y Series II", which included some of the upgrades found in the newer "Z Series" HSV models. These later models are quite rare, with a build life of nine months from April 2005 to December 2005.
As with the related Holden VY all-wheel drive vehicles, the HSV Y Series AWD vehicles as built from September 2004 to March 2005 confusingly have Z Series compliance andVehicle Identification Numbers; this correlates to the building of new specification Holden VZ and Z Series HSV non-AWD cars during this period.
The updated Avalanches with some of the Z Series upgrades can be externally visually differentiated from the Y Series versions by their re-profiled front bumper unit that looks less aggressive and which features a more integrated appearance to the auxiliary driving lights.
The Avalanche vehicles were fitted exclusively with the 5.7-litreLS1V8 engine rated at 270 kW (362 hp) of power and 475 N⋅m (350 lb⋅ft) of torque, mated to a four-speed4L65-E automatic gearbox. Permanent all-wheel drive was calibrated to deliver 62 percent of the power to the rear wheels, thereby maintaining a rear wheel drive feel to the handling of these vehicles.
Along with Holden's V8 Commodore-based AWD vehicles, the HSV Avalanche series was discontinued in late 2005 due to phasing out of the 5.7-litreLS1 engines because of theEuro III emissions regulations.
_utility_01.jpg)
HSV's facelifted Z Series was introduced in October 2004 and featured a new LS2 6.0-litre V8 engine, producing 297 kW (398 hp). Along with the new engine exclusive to HSV, Z Series introduces 19" wheels, Traction Control and Multi-link rear suspension as standard equipment to the Maloo range.[13]
In total, the Z Series built were 517 (base) and 958 (R8) and the Z Series MY06 were 181 (base) and 339 (R8).
On 25 May 2006, a standard 2006 HSV Maloo R8 driven byMark Skaife was clocked at an averaged speed of 271.44 km/h (168.66 mph) in theWoomera,South Australia.[14] The speed was recognised by theGuinness World Records representative, Chris Sheedy, as the Fastest Production Pickup Truck recorded. The speed improved over the previous record held by aDodge Ram SRT-10 at 248.784 km/h (154.587 mph).[15]
HSV produced the following Z Series and Z Series MY06 limited editions:
.jpg)
Exports of the VZ sedan were made to the Middle East as theChevrolet Lumina from 2004 as per the previous VY series. Trim levels were the Lumina LS (based on Commodore Executive), Lumina S (Commodore SV6 with 175 kW), Lumina LTZ (Berlina), Lumina SS (Commodore SS) and Lumina Royale (Calais).[21][22]
As with the previous VY model, exports to Malaysia and Thailand continued in VZ form as the Chevrolet Lumina, sold in LTZ trim (based on the Holden Berlina). Exports ceased during 2005.[21][22][23]
General Motors do Brasil imported the VZ as theChevrolet Omega from 2005 to replace the VY-based Omega. This update was announced 9 March 2005.[24] The Brazilian model sold as a single-specification CD model, based on the Holden Berlina with some additional Calais equipment.[22][23] VZ Omega sales officially ended in 2007 when replaced by the VE-based model, as announced on 4 July 2007.[25]
Sales of the VZ Commodore commenced in August 2004. Whilst selling well initially, the launch of the VZ coincided with the beginning of the large car market sales decline, resulting in fewer sales than (some) of its predecessor.
| Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Total | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2004 | N/a | 6,030 [26] | 7,869 [27] | 7,301 [28] | |||||||||
| 2005 | 4,225 [29] | 5,890 [30] | 4,906 [31] | ||||||||||
| 2006 | N/a | ||||||||||||
Note: Figures include sales of VZ Wagons on until July 2006, but it did remain on sale until 2008.
