Movatterモバイル変換

[0]ホーム
URL:

About:ITU-R 468 noise weighting

An Entity of Type:WikicatStandards,from Named Graph:http://dbpedia.org,within Data Space:dbpedia.org

ITU-R 468 (originally defined in CCIR recommendation 468-4, therefore formerly also known as CCIR weighting; sometimes referred to as CCIR-1k) is a standard relating to noise measurement, widely used when measuring noise in audio systems. The standard, now referred to as ITU-R BS.468-4, defines a weighting filter curve, together with a quasi-peak rectifier having special characteristics as defined by specified tests. It is currently maintained by the International Telecommunication Union who took it over from the CCIR.

thumbnail
PropertyValue
dbo:abstract
  • ITU-R 468 (originally defined in CCIR recommendation 468-4, therefore formerly also known as CCIR weighting; sometimes referred to as CCIR-1k) is a standard relating to noise measurement, widely used when measuring noise in audio systems. The standard, now referred to as ITU-R BS.468-4, defines a weighting filter curve, together with a quasi-peak rectifier having special characteristics as defined by specified tests. It is currently maintained by the International Telecommunication Union who took it over from the CCIR. It is used especially in the UK, Europe, and former countries of the British Empire such as Australia and South Africa. It is less well known in the USA where A-weighting has always been used. M-weighting is a closely related filter, an offset version of the same curve, without the quasi-peak detector. (en)
dbo:thumbnail
dbo:wikiPageExternalLink
dbo:wikiPageID
  • 2980850 (xsd:integer)
dbo:wikiPageLength
  • 15917 (xsd:nonNegativeInteger)
dbo:wikiPageRevisionID
  • 1113442346 (xsd:integer)
dbo:wikiPageWikiLink
dbp:wikiPageUsesTemplate
dcterms:subject
rdf:type
rdfs:comment
  • ITU-R 468 (originally defined in CCIR recommendation 468-4, therefore formerly also known as CCIR weighting; sometimes referred to as CCIR-1k) is a standard relating to noise measurement, widely used when measuring noise in audio systems. The standard, now referred to as ITU-R BS.468-4, defines a weighting filter curve, together with a quasi-peak rectifier having special characteristics as defined by specified tests. It is currently maintained by the International Telecommunication Union who took it over from the CCIR. (en)
rdfs:label
  • ITU-R 468 noise weighting (en)
owl:sameAs
prov:wasDerivedFrom
foaf:depiction
foaf:isPrimaryTopicOf
isdbo:wikiPageRedirects of
isdbo:wikiPageWikiLink of
isfoaf:primaryTopic of
Powered by OpenLink Virtuoso   This material is Open Knowledge    W3C Semantic Web Technology    This material is Open Knowledge   Valid XHTML + RDFa
This content was extracted fromWikipedia and is licensed under theCreative Commons Attribution-ShareAlike 3.0 Unported License
[8]ページ先頭
©2009-2025 Movatter.jp