Movatterモバイル変換

[0]ホーム
URL:

About:Cross-bolted bearing

An Entity of Type:plant,from Named Graph:http://dbpedia.org,within Data Space:dbpedia.org

A cross-bolted bearing is a bearing, usually a crankshaft main bearing of a piston engine. Most bearing caps are retained by two bolts, one on each side of the bearing journal, and parallel to the cylinder axis (or, on vee engines, parallel to an axis bisecting the vee angle). A cross-bolted bearing has one or more additional bolts, at right-angles to both the cylinder and crankshaft axes. These bolts may be either a single through bolt passing through the crankcase from one side to the other, or else two blind bolts threaded into the bearing cap from each side.

PropertyValue
dbo:abstract
  • A cross-bolted bearing is a bearing, usually a crankshaft main bearing of a piston engine. Most bearing caps are retained by two bolts, one on each side of the bearing journal, and parallel to the cylinder axis (or, on vee engines, parallel to an axis bisecting the vee angle). A cross-bolted bearing has one or more additional bolts, at right-angles to both the cylinder and crankshaft axes. These bolts may be either a single through bolt passing through the crankcase from one side to the other, or else two blind bolts threaded into the bearing cap from each side. Cross-bolting has two advantages: it couples the two sides of the crankcase together, making it stiffer overall and less prone to twisting. Secondly it helps to hold the bearing cap down against the downward force from the piston. This second advantage is usually only possible with blind bolts, as the dowel effect of a through bolt is less effective. (en)
dbo:wikiPageID
  • 25949514 (xsd:integer)
dbo:wikiPageLength
  • 1204 (xsd:nonNegativeInteger)
dbo:wikiPageRevisionID
  • 884306408 (xsd:integer)
dbo:wikiPageWikiLink
dbp:wikiPageUsesTemplate
dcterms:subject
gold:hypernym
rdf:type
rdfs:comment
  • A cross-bolted bearing is a bearing, usually a crankshaft main bearing of a piston engine. Most bearing caps are retained by two bolts, one on each side of the bearing journal, and parallel to the cylinder axis (or, on vee engines, parallel to an axis bisecting the vee angle). A cross-bolted bearing has one or more additional bolts, at right-angles to both the cylinder and crankshaft axes. These bolts may be either a single through bolt passing through the crankcase from one side to the other, or else two blind bolts threaded into the bearing cap from each side. (en)
rdfs:label
  • Cross-bolted bearing (en)
owl:sameAs
prov:wasDerivedFrom
foaf:isPrimaryTopicOf
isdbo:wikiPageWikiLink of
isfoaf:primaryTopic of
Powered by OpenLink Virtuoso   This material is Open Knowledge    W3C Semantic Web Technology    This material is Open Knowledge   Valid XHTML + RDFa
This content was extracted fromWikipedia and is licensed under theCreative Commons Attribution-ShareAlike 3.0 Unported License
[8]ページ先頭
©2009-2025 Movatter.jp